INSTRUCTIVO DE INSTALACION installation manual - Helvex

More documents

Recommendations

Info

Herramienta requerida / Tools required Taladro y broca de 1/4 Drill with a 1/4 drill Requerimientos de instalación Installation requirements Desarmador Screwdriver Llave allen (incluida) Allen key (included) Alturas recomendadas para Accesorios de baño MODELO DESCRI PCION ALTURA (cm) 9104 Portapapel tradicional 50 9117 Portapapel sencillo 50 9105 Toallero de barra 120 9106 Gancho sencillo 165 9107 Portacepillero de cristal 105 9108 Jabonera sencilla de cristal 105 9128 Jabonera sencilla metalica 105 9148 Jabonera de cristal con dos ificador 105 9109 Toallero sencillo 120 Recomended heights for bathroom’s accesories MODEL DESCRIPTION HEIGH (in) 9104 Toilet paper holder 19.68 9117 Single toilet paper holder 19.68 9105 Towel bar 47.24 9106 Single robe hook 64.97 9107 Crystal tooth brush holder 41.33 9108 Single crystal soap holder 41.33 9128 Single soap dish 41.33 9148 Crystal liquid soap dispenser 41.33 9109 Single towel 47.24 Accesorios Nuva / Nuva Bathroom Accessories
Instalación / Installation Accesorios con un solo soporte: Modelos 9106, 9107, 9108, 9109, 9117, 9128 y 9148. Accessories with a single mounting post: Models 9106 9107,9108,9109,9117,9128 and 9148. Opresor Set screw Ancla Wall bracket Opresor Set screw 26.7 mm (1.05 in) Barreno Drill hole Wall Bracket Pared Wall Ancla Wall bracket Taquete Shield Base Base Pija Lag Retire el ancla del accesorio. Take the wall bracket apart from the accessory. Una vez verificado el lugar donde colocará su accesorio, presente el ancla como se muestra en la figura. Marque y perfore. Once you have marked the place to install your product set the wall bracket as shown in the drawing. Should there be a tile type wall finishing, try to align the holes on the wall bracket to the union of the tiles. NOTA: Es importante que la orientación de los barrenos sea horizontalmente. NOTE: Make sure that the drill holes align horizontally. Inserte los taquetes y coloque el ancla, procurando que el barreno del ancla quede hacia abajo como se muestra en la figura. Fijela firmemente con las pijas. Insert the shields and place the wall bracket, making sure that the drill hole on the side faces downward. Fix in place with the lags. Una vez instalada el ancla, coloque el accesorio haciendo coincidir el barreno del ancla con el barreno roscado de la base del accesorio. Apriete firmemente con el opresor. Once the wall bracket is set, place the accessory on it, making sure that the side holes on the accessory’s base and on the wall bracket match. Fix the accessory to the base using the set-screw. Accesorios Nuva / Nuva Bathroom Accessories
Page 1: LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
Page 5 and 6: Taquete Shield Barreno Drill hole A
Page 7 and 8: 26.7 mm 1.05 in Barreno Drill hole

INSTRUCTIVO DE INSTALACION installation manual - Helvex

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?