Multiflex Wall Mount - Hycontrol
Multiflex Wall Mount - Hycontrol
Multiflex Wall Mount - Hycontrol
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Temperature Sensor<br />
MULTIFLEX MANUAL 8<br />
EDITION 2 : NOV 2000<br />
SECTION 1<br />
If a separate temperature sensor is used it must be mounted where it will monitor temperature<br />
changes of the air between the transducer and the product. This is usually adjacent to the transducer,<br />
but should not be in direct sunlight and should be protected from wind chill.<br />
Figure 8:<br />
85 dia<br />
85 DIA<br />
LOCK<br />
SCREW<br />
52<br />
72 DIA<br />
53<br />
5 REF<br />
30 dia<br />
34 ref<br />
35<br />
175<br />
HOUSING: CAST IRON BLACK EPOXY PAINT<br />
CLASSIFICATION EEx e II T6/IP 65<br />
PROBE: 316ST. STEEL<br />
M20 x 1.5<br />
EXTERNAL<br />
EARTH<br />
15<br />
28 DIA<br />
12<br />
M20 x 1.5<br />
20 25 50<br />
150<br />
25<br />
33 HEX<br />
3/4" BSPP<br />
50<br />
9 dia<br />
+ POLARITY<br />
- UNIMPORTANT<br />
TEMPERATURE SENSOR RTS 2B<br />
10 DIA<br />
BLUE<br />
RED<br />
TERMINALS<br />
(VIEWED ON TOP)<br />
HOUSING: POLYCARBONATE<br />
PROBE:316 SS<br />
TEMPERATURE SENSOR RTS 2<br />
TERMINALS ARE NOT POLARISED<br />
INTERNAL<br />
EARTH