SMCBR21VPN

More documents

Recommendations

Info

Example Setting IPSec VPN connection between two SMC BR21VPN Preparation Company A WAN IP: 61.11.11.11 LAN IP: 192.168.10.X Company B WAN IP: 211.22.22.22 LAN IP: 192.168.20.X This example takes two SMC BR21VPN as work platform. Suppose Company A 192.168.10.100 create a VPN connection with Company B 192.168.20.100 for downloading the sharing file. The Default Gateway of Company A is the LAN IP of the SMC BR21VPN 192.168.10.1. Follow the steps below: STEP 1.Enter the default IP of Gateway of Company A’s SMC BR21VPN, 192.168.10.1 and select IPSec Autokey in VPN. Click New Entry. (Figure11-5) Figure11-5 IPSec Autokey WebUI STEP 2.In the list of IPSec Autokey, fill in Name with VPN_A. (Figure11-6) STEP 3.Select Remote Gateway-Fixed IP or Domain Name In To Destination list and enter the IP Address. 145
STEP 4.Select Preshare in Authentication Method and enter the Preshared Key (max: 100 bits) STEP 5.Select ISAKMP Algorithm in Encapsulation list. Choose the Algorithm when setup connection. Please select ENC Algorithm (3DES/DES/AES), AUTH Algorithm (MD5/SHA1), and Group (GROUP1, 2,5). Both sides have to choose the same group. Here we select 3DES for ENC Algorithm, MD5 for AUTH Algorithm, and GROUP1 for group. (Figure11-9) Figure11-9 IPSec Encapsulation Setting 146
Page 1 and 2:
Barricade Dual WAN Port Load Balanc
Page 3 and 4:
LIMITED WARRANTY Limited Warranty S
Page 5 and 6:
CONSEQUENTIAL DAMAGES FOR CONSUMER
Page 7 and 8:
RFI Emission: • Limit class A acc
Page 9 and 10:
Veuillez lire à fond l’informati
Page 11 and 12:
Warnings and Cautionary Messages Wa
Page 13 and 14:
Audience The guide is intended for
Page 15 and 16:
CHAPTER 8 AUTHENTICATION ..........
Page 17 and 18:
Chapter 1 Administrator Administrat
Page 19 and 20:
Admin Adding a new Sub Administrato
Page 21 and 22:
Add Remote Management IPs STEP 1.Ad
Page 23 and 24:
Software Update STEP 1.Select Softw
Page 25 and 26:
Define the required fields of Setti
Page 27 and 28:
NAT Mode: It allows Internal Netwo
Page 29 and 30:
Setting System Settings- Exporting
Page 31 and 32:
Restoring Factory Default Settings
Page 33 and 34:
Enabling E-mail Alert Notification
Page 35 and 36:
Date / Time Date/Time Settings STEP
Page 37 and 38:
Adding Multiple Subnet Add the foll
Page 39 and 40:
Route Table To connect two differen
Page 41 and 42:
STEP 3.Enter the following setting
Page 43 and 44:
DHCP STEP 1.Select DHCP in System a
Page 45 and 46:
DDNS Dynamic DNS Settings STEP 1.Se
Page 47 and 48:
Host Table STEP 1.Select Host Table
Page 49 and 50:
Chapter 3 Interface Interface In th
Page 51 and 52:
Connect Mode: Display the current
Page 53 and 54:
We set up four Interface Address ex
Page 55 and 56:
WAN Setting WAN Interface Address S
Page 57 and 58:
STEP 3.Select the Connecting way:
Page 59 and 60:
Dynamic IP Address (Cable Modem Use
Page 61 and 62:
Static IP Address (Figure3-9) 1. Se
Page 63 and 64:
DMZ Setting DMZ Interface Address (
Page 65 and 66:
Chapter 4 Address Address The SMC B
Page 67 and 68:
We set up two Address examples in t
Page 69 and 70:
STEP 2.Adding the following setting
Page 71 and 72:
Setup a policy that only allows par
Page 73 and 74:
STEP 3.Enter the following settings
Page 75 and 76:
Chapter 5 Service Service TCP and U
Page 77 and 78:
Define the required fields of Servi
Page 79 and 80:
Custom Allow external user to commu
Page 81 and 82:
Under general circumstances, the ra
Page 83 and 84:
Group Setting service group and res
Page 85 and 86:
STEP 2.In LAN Group of Address func
Page 87 and 88:
Example To configure the valid time
Page 89 and 90:
Chapter 7 QOS QoS By configuring th
Page 91 and 92:
Define the required fields of QoS W
Page 93 and 94:
Example Setting a policy that can r
Page 95 and 96: Chapter 8 Authentication Authentica
Page 97 and 98: When the user connect to external n
Page 99 and 100: Auth-User Name: The user account f
Page 101 and 102: Example Setting specific users to c
Page 103 and 104: STEP 3.Add a policy in Outgoing Pol
Page 105 and 106: Chapter 9 Content Blocking Content
Page 107 and 108: Sub-name file Blocking: Prevent us
Page 109 and 110: URL Restrict the Internal Users onl
Page 111 and 112: STEP 2.Add a Outgoing Policy and us
Page 113 and 114: STEP 2.Add a new Outgoing Policy an
Page 115 and 116: STEP 2.Add a new Outgoing Policy an
Page 117 and 118: Step2. In Policy Outgoing, add one
Page 119 and 120: Chapter 10 Virtual Server Virtual S
Page 121 and 122: Define the required fields of Virtu
Page 123 and 124: Example Make a single server that p
Page 125 and 126: STEP 7.Complete the setting of prov
Page 127 and 128: STEP 2.Enter the following data in
Page 129 and 130: The external user use VoIP to conne
Page 131 and 132: STEP 5.Add a new Incoming Policy, w
Page 133 and 134: Make several servers that provide s
Page 135 and 136: STEP 4.Enter the following data in
Page 137 and 138: STEP 7.Complete the setting of prov
Page 139 and 140: Define the required fields of VPN:
Page 141 and 142: Define the required fields of IPSec
Page 143 and 144: Define the required fields of PPTP
Page 145: We set up two VPN examples in this
Page 149 and 150: STEP 9.Enter the following setting
Page 153 and 154: STEP 4.Select Remote Gateway-Fixed
Page 159 and 160: Setting PPTP VPN connection between
Page 161 and 162: STEP 2.Add the following settings i
Page 165 and 166: The Default Gateway of Company B is
Page 169 and 170: STEP 5.Complete PPTP VPN Connection
Page 171 and 172: (4) LAN to DMZ: The source IP is in
Page 173 and 174: Option: To display if every functi
Page 175 and 176: We set up six Policy examples in th
Page 177 and 178: STEP 2.Complete the setting of Logg
Page 179 and 180: Forbid the users to access to speci
Page 181 and 182: STEP 2.Enter as following in WAN an
Page 187 and 188: STEP 3.Enter the following in Incom
Page 189 and 190: STEP 4.Enter the following in WAN t
Page 193 and 194: STEP 8.Add the following setting in
Page 195 and 196: Define the required fields of Hacke
Page 197 and 198:
Detect Ping of Death Attack: Selec
Page 199 and 200:
Internet Alert SMC BR21VPN Alarm an
Page 201 and 202:
Figure16-4 NetBIOS Alert Notificati
Page 203 and 204:
Chapter 14 Attack Alarm Attack Alar
Page 205 and 206:
Internal Alarm To record the DDoS a
Page 207 and 208:
STEP 2.When Hacker attacks the SMC
Page 209 and 210:
We set up four LOG examples in the
Page 211 and 212:
STEP 3.Click Traffic Log. It will s
Page 213 and 214:
STEP 5.Click on Download Logs and s
Page 215 and 216:
Event Log To record the detailed ma
Page 217 and 218:
STEP 3.Click Clear Logs and click O
Page 219 and 220:
STEP 2.Click on Download Logs and s
Page 221 and 222:
Log Backup To save or receive the r
Page 223 and 224:
Chapter 16 Accounting Report Accoun
Page 225 and 226:
Inbound Accounting Report It is the
Page 227 and 228:
Figure19-1 Outbound Source IP Stati
Page 229 and 230:
Figure19-2 Outbound Destination IP
Page 231 and 232:
Accounting Report. 230
Page 233 and 234:
Inbound STEP 1.Enter Inbound in Acc
Page 235 and 236:
Enter Inbound in Accounting Report
Page 237 and 238:
STEP 2.Enter Inbound in Accounting
Page 239 and 240:
Chapter 17 Statistics Statistics WA
Page 241 and 242:
WAN Statistics STEP 1.Enter WAN in
Page 243 and 244:
Policy Statistics STEP 1.If you had
Page 245 and 246:
Chapter 18 Status Status The users
Page 247 and 248:
Figure21-1 Interface Status 246
Page 249 and 250:
ARP Table STEP 1.Enter ARP Table in
Page 251:
20 Mason • Irvine, CA 92618 • P
show all

SMCBR21VPN

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?