SMCBR21VPN

More documents

Recommendations

Info

Outbound STEP 1.Enter Outbound in Accounting Report and select Top Users to inquire the statistics of Send / Receive packets, Downstream / Upstream, First packet/Last packet/Duration and the service from the LAN or DMZ user’s IP that pass the SMC BR21VPN. (Figure19-1) TOP: Select the data you want to view, it presents 10 results in one page. Pull-down menu selection Source IP:The IP address used by LAN users who use SMC BR21VPN to connect to WAN service server. Downstream:The percentage of downstream and the value of each WAN service server which uses SMC BR21VPN to LAN user. Upstream:The percentage of upstream and the value of each LAN user who uses SMC BR21VPN to WAN service server. First Packet:When the first packet is sent to WAN service server from LAN user, the sent time will be recorded by the SMC BR21VPN. Last Packet:When the last packet sent from WAN service server is received by the LAN user, the sent time will be recorded by the SMC BR21VPN. Duration:The period of time which starts from the first packet to the last packet to be recorded. Total Traffic:The SMC BR21VPN will record the sum of packet sent/receive time and show the percentage of each LAN user’s upstream/downstream to WAN service server. Reset Counter:Click Reset Counter button to refresh Accounting Report. 225
Figure19-1 Outbound Source IP Statistics Report 226
Page 1 and 2:
Barricade Dual WAN Port Load Balanc
Page 3 and 4:
LIMITED WARRANTY Limited Warranty S
Page 5 and 6:
CONSEQUENTIAL DAMAGES FOR CONSUMER
Page 7 and 8:
RFI Emission: • Limit class A acc
Page 9 and 10:
Veuillez lire à fond l’informati
Page 11 and 12:
Warnings and Cautionary Messages Wa
Page 13 and 14:
Audience The guide is intended for
Page 15 and 16:
CHAPTER 8 AUTHENTICATION ..........
Page 17 and 18:
Chapter 1 Administrator Administrat
Page 19 and 20:
Admin Adding a new Sub Administrato
Page 21 and 22:
Add Remote Management IPs STEP 1.Ad
Page 23 and 24:
Software Update STEP 1.Select Softw
Page 25 and 26:
Define the required fields of Setti
Page 27 and 28:
NAT Mode: It allows Internal Netwo
Page 29 and 30:
Setting System Settings- Exporting
Page 31 and 32:
Restoring Factory Default Settings
Page 33 and 34:
Enabling E-mail Alert Notification
Page 35 and 36:
Date / Time Date/Time Settings STEP
Page 37 and 38:
Adding Multiple Subnet Add the foll
Page 39 and 40:
Route Table To connect two differen
Page 41 and 42:
STEP 3.Enter the following setting
Page 43 and 44:
DHCP STEP 1.Select DHCP in System a
Page 45 and 46:
DDNS Dynamic DNS Settings STEP 1.Se
Page 47 and 48:
Host Table STEP 1.Select Host Table
Page 49 and 50:
Chapter 3 Interface Interface In th
Page 51 and 52:
Connect Mode: Display the current
Page 53 and 54:
We set up four Interface Address ex
Page 55 and 56:
WAN Setting WAN Interface Address S
Page 57 and 58:
STEP 3.Select the Connecting way:
Page 59 and 60:
Dynamic IP Address (Cable Modem Use
Page 61 and 62:
Static IP Address (Figure3-9) 1. Se
Page 63 and 64:
DMZ Setting DMZ Interface Address (
Page 65 and 66:
Chapter 4 Address Address The SMC B
Page 67 and 68:
We set up two Address examples in t
Page 69 and 70:
STEP 2.Adding the following setting
Page 71 and 72:
Setup a policy that only allows par
Page 73 and 74:
STEP 3.Enter the following settings
Page 75 and 76:
Chapter 5 Service Service TCP and U
Page 77 and 78:
Define the required fields of Servi
Page 79 and 80:
Custom Allow external user to commu
Page 81 and 82:
Under general circumstances, the ra
Page 83 and 84:
Group Setting service group and res
Page 85 and 86:
STEP 2.In LAN Group of Address func
Page 87 and 88:
Example To configure the valid time
Page 89 and 90:
Chapter 7 QOS QoS By configuring th
Page 91 and 92:
Define the required fields of QoS W
Page 93 and 94:
Example Setting a policy that can r
Page 95 and 96:
Chapter 8 Authentication Authentica
Page 97 and 98:
When the user connect to external n
Page 99 and 100:
Auth-User Name: The user account f
Page 101 and 102:
Example Setting specific users to c
Page 103 and 104:
STEP 3.Add a policy in Outgoing Pol
Page 105 and 106:
Chapter 9 Content Blocking Content
Page 107 and 108:
Sub-name file Blocking: Prevent us
Page 109 and 110:
URL Restrict the Internal Users onl
Page 111 and 112:
STEP 2.Add a Outgoing Policy and us
Page 113 and 114:
STEP 2.Add a new Outgoing Policy an
Page 115 and 116:
STEP 2.Add a new Outgoing Policy an
Page 117 and 118:
Step2. In Policy Outgoing, add one
Page 119 and 120:
Chapter 10 Virtual Server Virtual S
Page 121 and 122:
Define the required fields of Virtu
Page 123 and 124:
Example Make a single server that p
Page 125 and 126:
STEP 7.Complete the setting of prov
Page 127 and 128:
STEP 2.Enter the following data in
Page 129 and 130:
The external user use VoIP to conne
Page 131 and 132:
STEP 5.Add a new Incoming Policy, w
Page 133 and 134:
Make several servers that provide s
Page 135 and 136:
STEP 4.Enter the following data in
Page 137 and 138:
STEP 7.Complete the setting of prov
Page 139 and 140:
Define the required fields of VPN:
Page 141 and 142:
Define the required fields of IPSec
Page 143 and 144:
Define the required fields of PPTP
Page 145 and 146:
We set up two VPN examples in this
Page 147 and 148:
STEP 4.Select Preshare in Authentic
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
STEP 4.Select Remote Gateway-Fixed
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Setting PPTP VPN connection between
Page 161 and 162:
STEP 2.Add the following settings i
Page 163 and 164:
Page 165 and 166:
The Default Gateway of Company B is
Page 167 and 168:
Page 169 and 170:
STEP 5.Complete PPTP VPN Connection
Page 171 and 172:
(4) LAN to DMZ: The source IP is in
Page 173 and 174:
Option: To display if every functi
Page 175 and 176: We set up six Policy examples in th
Page 177 and 178: STEP 2.Complete the setting of Logg
Page 179 and 180: Forbid the users to access to speci
Page 181 and 182: STEP 2.Enter as following in WAN an
Page 183 and 184: STEP 4.Enter the following setting
Page 187 and 188: STEP 3.Enter the following in Incom
Page 189 and 190: STEP 4.Enter the following in WAN t
Page 193 and 194: STEP 8.Add the following setting in
Page 195 and 196: Define the required fields of Hacke
Page 197 and 198: Detect Ping of Death Attack: Selec
Page 199 and 200: Internet Alert SMC BR21VPN Alarm an
Page 201 and 202: Figure16-4 NetBIOS Alert Notificati
Page 203 and 204: Chapter 14 Attack Alarm Attack Alar
Page 205 and 206: Internal Alarm To record the DDoS a
Page 207 and 208: STEP 2.When Hacker attacks the SMC
Page 209 and 210: We set up four LOG examples in the
Page 211 and 212: STEP 3.Click Traffic Log. It will s
Page 213 and 214: STEP 5.Click on Download Logs and s
Page 215 and 216: Event Log To record the detailed ma
Page 217 and 218: STEP 3.Click Clear Logs and click O
Page 219 and 220: STEP 2.Click on Download Logs and s
Page 221 and 222: Log Backup To save or receive the r
Page 223 and 224: Chapter 16 Accounting Report Accoun
Page 225: Inbound Accounting Report It is the
Page 229 and 230: Figure19-2 Outbound Destination IP
Page 231 and 232: Accounting Report. 230
Page 233 and 234: Inbound STEP 1.Enter Inbound in Acc
Page 235 and 236: Enter Inbound in Accounting Report
Page 237 and 238: STEP 2.Enter Inbound in Accounting
Page 239 and 240: Chapter 17 Statistics Statistics WA
Page 241 and 242: WAN Statistics STEP 1.Enter WAN in
Page 243 and 244: Policy Statistics STEP 1.If you had
Page 245 and 246: Chapter 18 Status Status The users
Page 247 and 248: Figure21-1 Interface Status 246
Page 249 and 250: ARP Table STEP 1.Enter ARP Table in
Page 251: 20 Mason • Irvine, CA 92618 • P
show all

SMCBR21VPN

Create successful ePaper yourself

Delete template?

Save as template?