Product catalog Product catalog - Unicom

Air quality sensors
Power supply 24 Vac; 2 VA
Mounting place internal wall
Housing (HxWxD) 104 mm; 99 mm; 30 mm
Wiring terminals 7
Additional description Temperature setpoint potentiometer delivered with 4 setpoint
wheels; white and blue, relative and absolute scale.
PC interface cable (PC software on request from Honeywell)
CO2 and temperature transmitters
For sensing or controlling of CO2 concentration; and temperature measurement in buildings.
Output signal the following output signals are applicable:
0(2)..10 Vdc or 0(4)..20 mA for 0..2000/3000 ppm CO2 0(2)..10 Vdc or 0(4)..20mA for 0..50 oC relay output with adjustable CO2 setpoint and hysteresis for
ventilation on/off
Power supply 24 Vac; 2 VA
Additional description Models with LCD available for CO2 concentration or
temperature reading.
Contact input for occupancy detection.
RS232-port for connection with PC for parameter settings.
Service interval 5 years, according 89/336EEC.
For sensing or controlling of CO2 concentration in buildings.
Protection class IP65 when probe mounted downwards, otherwise IP20
Output signal 0..10 V for 0..2000 ppm
Power supply 24 Vac; max. 3 VA
Mounting place air duct
Wiring terminals 4
Type
C7110D1009
HDI10
Mounting place Model Protection class Type
internal wall without LCD IP30 AQS51
internal wall with 7-segment LCD IP30 AQS61
Mounting place Model Protection class Type
air duct without LCD IP65 AQS51-KAM
air duct with 7-segment LCD IP65 AQS61-KAM
CO2 test set with gas generator for 0 ppm calibration
Interface cable to PC
Service software for parameter settings
Air duct CO2 sensor
AQS-F0005
AQS3/4CABLE
AQSPC
Type
AQS71-KAM
8-39
2
3
4
5
6
7
8
9
10
11
12
13
14