Product catalog Product catalog - Unicom

16
16
17
18
19
20
21
22
23
24
25
26
27
28
Safety Groups
21-10
Safety group with interchangeable safety valve insert and pressure reducing valve,
SG160SD
Type SG160S safety groups are used to protect pressurised water heaters according to the
requirements of DIN 4753, Part 1, DIN 1988 and DIN EN1488. They are compact appliances which
incorporate all the necessary safety devices such as non return valve, shutoff valves, test point,
diaphragm type safety valve and pressure reducing valve in one unit. The automatic self opening and
closing of the safety valve protects the downstream hot water unit. The non return valve prevents back
pressure, backflow and back syphonage of contaminated water. In addition, a balanced seat pressure
reducing valve is fitted on the inlet to control the supply pressure to that required for the system.
Approvals DIN/DVGW-approved
Media Water
Body material brass, dezincification resistant
Max. media temperature 40 oC Pressure setpoint range 1,5 ... 6 bar
Setpoint scale yes
Transparant strainer chamber yes
Balanced seat design yes
Additional description For closed water heaters in compliance with DIN 4753, Part 1 and EN
1717. Tested to TRD 721 for pressure range 1.0 bar to 10.0 bar.
Fully approved for noise level protection to group 1
Safety valve tested to TRD 721 for the pressure range 1.0 to
10.0 bar
Balanced seat pressure reducing valve - inlet pressure fluctuations
do not influence the outlet pressure
Easy venting
Complies with KTW requirements
With threaded male connections, set pressure 6,0 bar
Port connection type Port diameter DN size Set pressure Type
inch mm bar
external threads 1/2 15 6 SG160SD-1/2AA
external threads 3/4 20 6 SG160SD-3/4AA
external threads 1 25 6 SG160SD-1AA
With threaded male connections, set pressure 8,0 bar
Port connection type Port diameter DN size Set pressure Type
inch mm bar
external threads 1/2 15 8 SG160SD-1/2AB
external threads 3/4 20 8 SG160SD-3/4AB
external threads 1 25 8 SG160SD-1AB
With threaded male connections, set pressure 10,0 bar
Port connection type Port diameter DN size Set pressure Type
inch mm bar
external threads 1/2 15 10 SG160SD-1/2AC
external threads 3/4 20 10 SG160SD-3/4AC
external threads 1 25 10 SG160SD-1AC
Without connections, set pressure 6,0 bar, DN is based on connection size of tailpiece
Port connection type Port diameter DN size Set pressure Type
inch mm bar
– – 20 6 SG160SD-3/4EA
– – 20 6 SG160SD-1EA
http://products.ecc.emea.honeywell.com/europe