Product catalog Product catalog - Unicom

16
16
17
18
19
20
21
22
23
24
25
26
27
28
Pressure Reducing Valves with flanges
18-20
Low pressure pattern pressure reducing valve with flanged connections, D15NP
Pressure reducing valves of this type protect installations against excessive pressure from the supply.
They can be used for industrial or commercial applications within the range of their specification. By
installing a pressure reducing valve, pressurisation damage is avoided and water consumption is
reduced. The set pressure is also maintained constant, even when there is wide inlet pressure
fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow
noise in the installation.
Media Water, compressed air and nitrogen in consideration of valid
standards (e.g. DIN EN 12502)
Body material cast iron GG25
Spring bonnet material metal
Body finishing powder coating
Port connection type flanges
Max. media temperature 70 o C
Static pressure PN16
Pressure setpoint range 0,2 ... 2 bar
Balanced seat design yes
Additional description Non-rising stem for setting outlet pressure and position
indicator on spring bonnet (except for DN 200 mm)
The adjustment spring is not in contact with the potable water
With inlet and outlet pressure gauge (DN 80 - DN 150) or with
outlet pressure gauge (DN 50, DN 65, DN 200)
Powder coated inside and outside - Powder used is
physiologically and toxicologically safe
With PN 16 flanged connections
Spare Parts
Pressure gauge, 0 - 16 bar
Pressure gauge, 0 - 4 bar
http://products.ecc.emea.honeywell.com/europe
DN size Flow capacity Kvs Type
mm
50 28 D15NP-50A
65 47 D15NP-65A
80 70 D15NP-80A
100 110 D15NP-100A
125 180 D15NP-125A
150 250 D15NP-150A
200 380 D15NP-200A
M07M-A16
M07M-A4