2550ci - TA Triumph-Adler GmbH

More documents

Recommendations

Info

Network Status Check the information including firmware version, network address and protocol. Service Status 9-64 Default Setting (System Menu) More detailed information is available than on the Status Page. Service personnel usually print the service status pages for maintenance purpose. Use the procedure below to print a report. 1 Press the System Menu key. 2 Press [Report] and [Next] of Print Report. 3 Press [Print] for the report you want to print. A confirmation screen appears. Press [Yes]. Printing starts. Send Result Report Automatically print a report of transmission result when a transmission is complete. The table below shows the available settings. 1 Press the System Menu key. 2 Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then [Change] of E-mail/ Folder. 3 Press [Off], [On], or [Error Only]. 4 Press [OK]. Network Status Page Firmware Version Item Description Off No result report printed. On Result report automatically printed. Transmitted images can also be attached to the FAX result report. Error Only Result report printed only when a transmission ends in an error. If two or more destinations are registered, the reports are printed only for the destinations with the errors. Transmitted images can also be attached to the FAX result report.
Report for Job Canceled before Sending Print a send result report when the job is canceled before being sent. 1 Press the System Menu key. 9-65 Default Setting (System Menu) 2 Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then [Change] of Canceled before Sending. 3 Press [Off], [On]. 4 Press [OK]. Sending Log History You can send the log history by e-mail. You can either send it manually as needed or have it sent automatically whenever a set number of jobs is reached. NOTE: If the user authentication screen appears, enter your login user name and password and then press [Login]. For this, you need to login with administrator privileges. The login user name and login password are both set to "2500" in the factory default state. Destination Set the destination to which log histories are sent. Use the procedure below to set the destination. 1 Press the System Menu key. 2 Press [Report], [Next] of Sending Log History and then [Change] of Destination. 3 To enter a new e-mail address, press [E-mail Address Entry]. Press [E-mail Address], enter the destination e-mail address and then press [OK]. 4 To set an address from the address book, press [E-mail Address Book]. 5 Press [Address Book]. Select the destination from the address book and press [OK]. The selected e-mail addresses is displayed. NOTE: For information on specifying destinations, refer to Specifying Destination on page 3-39. You can view information on the selected destinations by pressing [Detail]. 6 Press [OK]. 9
Page 1 and 2:
2550ci User Manual 2550ci Digital M
Page 3 and 4:
Safety Conventions in This Guide Th
Page 5 and 6:
iii Contents Mixed Size Originals .
Page 7 and 8:
v Contents 10 Management User Login
Page 9 and 10:
To send documents It sends. What yo
Page 11 and 12:
Menu Map (The names displayed on th
Page 13 and 14:
Color/Image Quality Density (page 6
Page 15 and 16:
xiii Zoom (page 6-6) Text Stamp (pa
Page 17 and 18:
Print Functions File Name Entry (pa
Page 19 and 20:
Color Selection (Copy) (page 9-19)
Page 21 and 22:
Paper Feed Mode (page 9-62) System
Page 23 and 24:
Report Print Report Status Page (pa
Page 25 and 26:
Environment The service environment
Page 27 and 28:
Laser Safety (Europe) Laser radiati
Page 29 and 30:
Legal and Safety Information Please
Page 31 and 32:
GPL/LGPL This product contains GPL
Page 33 and 34:
Monotype Imaging License Agreement
Page 35 and 36:
“Work” shall mean the work of a
Page 37 and 38:
Energy Saving Control Function The
Page 39 and 40:
Conventions in This Guide The follo
Page 41 and 42:
1 Part Names This chapter identifie
Page 43 and 44:
Numeric keys. Enter numbers and sym
Page 45 and 46:
18 Original Width Guide 19 Cleaning
Page 47 and 48:
34 33 Main Power Switch 34 Cassette
Page 49 and 50:
2 Preparation before Use This chapt
Page 51 and 52:
Determining the Connection Method a
Page 53 and 54:
Connecting Cables Connecting LAN Ca
Page 55 and 56:
Power On/Off Power On When the main
Page 57 and 58:
Low Power Mode and Auto Low Power M
Page 59 and 60:
Switching the Language for Display
Page 61 and 62:
Network Setup (LAN Cable Connection
Page 63 and 64:
Auto-IP Settings Select whether or
Page 65 and 66:
● Standard installation. ○ Allo
Page 67 and 68:
2-19 Preparation before Use 7 Selec
Page 69 and 70:
2-21 Preparation before Use Next, s
Page 71 and 72:
Setting TWAIN Driver Register this
Page 73 and 74:
Embedded Web Server RX (Settings fo
Page 75 and 76:
2 Enter the correct settings in eac
Page 77 and 78:
Loading Paper in the Cassettes 2-29
Page 79 and 80:
2-31 6 Gently push the cassette bac
Page 81 and 82:
2-33 Preparation before Use 3 Adjus
Page 83 and 84:
3 Insert along the paper width guid
Page 85 and 86:
Common Settings - Paper Size Set ca
Page 87 and 88:
Common Settings - Paper Size Set th
Page 89 and 90:
2-41 Original size indicator plate
Page 91 and 92:
How to Load Originals 2-43 Preparat
Page 93 and 94:
3 Basic Operation This chapter expl
Page 95 and 96:
Simple Login Status Logout Select t
Page 97 and 98:
Touch Panel Display Display for Ori
Page 99 and 100:
Selecting Color Mode 3-7 Basic Oper
Page 101 and 102:
Density Use this procedure to adjus
Page 103 and 104:
Zoom 3-11 Basic Operation Adjust th
Page 105 and 106:
Duplex Produce two-sided copies. Th
Page 107 and 108:
Duplex Original Zoom Paper Status C
Page 109 and 110:
Reserve Next 3-17 Basic Operation T
Page 111 and 112:
Staple Use this feature to staple y
Page 113 and 114:
Sending 3-21 Basic Operation This m
Page 115 and 116:
On Hook Status Destination Detail A
Page 117 and 118:
Folder Path Entry SMB FTP Status St
Page 119 and 120:
On Hook Destination Detail ABCD abc
Page 121 and 122:
Preparation for sending a document
Page 123 and 124:
Creating a Shared Folder Create a s
Page 125 and 126:
3-33 Basic Operation 6 Select the e
Page 127 and 128:
Configuring Windows Firewall (for W
Page 129 and 130:
3-37 Basic Operation 6 Select TCP,
Page 131 and 132:
Specifying Destination When specify
Page 133 and 134:
One Touch Key On Hook Destination D
Page 135 and 136:
Quick Copy/Proof and Hold Box...pag
Page 137 and 138:
Custom Box List 3-45 Basic Operatio
Page 139 and 140:
Viewing/Editing Box Details You can
Page 141 and 142:
User Privileges 3-49 Basic Operatio
Page 143 and 144:
Canceling Jobs Follow the steps bel
Page 145 and 146:
Document Box Changing Registration
Page 147 and 148:
Program 3-55 Basic Operation By reg
Page 149 and 150:
Registering Shortcuts (Copy, Send,
Page 151 and 152:
Using the Internet Browser This sec
Page 153 and 154:
Using Weekly Timer 3-61 Basic Opera
Page 155 and 156:
4 Copying Functions This chapter ex
Page 157 and 158:
Original Size Original : 210x297mm
Page 159 and 160:
Use the procedure below to select t
Page 161 and 162:
Selecting How to Copy Originals 4-7
Page 163 and 164:
Page 165 and 166:
Combine 4-11 Copying Functions This
Page 167 and 168:
The procedure for using Combine mod
Page 169 and 170:
Border Erase 4-15 Copying Functions
Page 171 and 172:
Booklet 4-17 Copying Functions The
Page 173 and 174:
Cover 4-19 Copying Functions Add a
Page 175 and 176:
Page # 4-21 Copying Functions Numbe
Page 177 and 178:
Memo Page 4-23 Copying Functions De
Page 179 and 180:
Poster Original Copy Follow the ste
Page 181 and 182:
Image Repeat Image Repeat Double Co
Page 183 and 184:
Text Stamp When making copies, you
Page 185 and 186:
Bates Stamp Off On Status Add Short
Page 187 and 188:
Color Balance Adjust the strength o
Page 189 and 190:
One-touch Image Adjust Adjust image
Page 191 and 192:
Sharpness 4-37 Copying Functions Ad
Page 193 and 194:
Saturation The brightness of colore
Page 195 and 196:
Continuous Scan 4-41 Copying Functi
Page 197 and 198:
Mirror Image Copies the mirrored im
Page 199 and 200:
Job Finish Notice Off Status Addres
Page 201 and 202:
Repeat Copy 4-47 Copying Functions
Page 203 and 204:
OHP Backing Sheet 4-49 Copying Func
Page 205 and 206:
5 Printing This chapter explains th
Page 207 and 208:
Printer driver print settings scree
Page 209 and 210:
Job Box expansion functions 5-5 Pri
Page 211 and 212:
6 Sending Functions This chapter ex
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Centering 6-7 Sending Functions Whe
Page 219 and 220:
Use the procedure below to send mix
Page 221 and 222:
Original Orientation 6-11 Sending F
Page 223 and 224:
File Format Select the file format
Page 225 and 226:
PDF Encryption Functions 6-15 Sendi
Page 227 and 228:
The table below shows the available
Page 229 and 230:
Scan Resolution 6-19 Sending Functi
Page 231 and 232:
Background Density Adj. 6-21 Sendin
Page 233 and 234:
Continuous Scan 6-23 Sending Functi
Page 235 and 236:
Border Erase 6-25 Sending Functions
Page 237 and 238:
File Name Entry 6-27 Sending Functi
Page 239 and 240:
WSD Scan/DSM Scan WSD Scan (Windows
Page 241 and 242:
DSM Scan (Windows Server 2008 R2 On
Page 243 and 244:
Item Detail 6-33 Sending Functions
Page 245 and 246:
6-35 Sending Functions 6 Select the
Page 247 and 248:
Send and Print When you send origin
Page 249 and 250:
Text Stamp When sending, you can di
Page 251 and 252:
Use the procedure below to specify
Page 253 and 254:
Scanning with FMU Connection 6-43 S
Page 255 and 256:
7 Document Box This chapter explain
Page 257 and 258:
7-3 Document Box Auto File Deletion
Page 259 and 260:
Printing Documents (Print) The proc
Page 261 and 262:
Sending Documents (Send) The proced
Page 263 and 264:
Form Overlay from Custom Boxes (For
Page 265 and 266:
Move to Custom Box Status Select th
Page 267 and 268:
Deleting Documents The procedure fo
Page 269 and 270:
Deleting a Document You can delete
Page 271 and 272:
Deleting a Document You can delete
Page 273 and 274:
Deletion of Job Retention 7-19 Docu
Page 275 and 276:
Deleting a Form Stored You can dele
Page 277 and 278:
Print Status Removable Memory Name
Page 279 and 280:
Print Removable Memory Name Date an
Page 281 and 282:
8 Status / Job Cancel This chapter
Page 283 and 284:
Details of the Status Screens The i
Page 285 and 286:
Sending Jobs Status Job No. Accepte
Page 287 and 288:
Checking the Detailed Information o
Page 289 and 290:
Checking Job History Check the hist
Page 291 and 292:
Pause and Resumption of Jobs Pause
Page 293 and 294:
8-13 Status / Job Cancel Checking t
Page 295 and 296:
Configuring the Devices Status Scan
Page 297 and 298:
9 Default Setting (System Menu) Thi
Page 299 and 300:
Default Screen Select the screen ap
Page 301 and 302:
9-5 Default Setting (System Menu) U
Page 303 and 304:
Paper Size and Media Type Setup for
Page 305 and 306:
For Custom 1-8, settings for duplex
Page 307 and 308:
Paper Source for Cover 9-11 Default
Page 309 and 310: Error Handling 9-13 Default Setting
Page 311 and 312: Paper Output 9-15 Default Setting (
Page 313 and 314: Original Orientation Set the origin
Page 315 and 316: Color Selection (Copy) Select the d
Page 317 and 318: Backgrnd Density (Copy) Set the def
Page 319 and 320: Border Erase Default 9-23 Default S
Page 321 and 322: Use the procedure below to set the
Page 325 and 326: 9-29 Default Setting (System Menu)
Page 327 and 328: Font (Bates Stamp) When a bates sta
Page 329 and 330: Edit Bates Stamp Set the default Ba
Page 331 and 332: Bates Stamp Select whether or not t
Page 333 and 334: Edit Text Stamp Set the default tex
Page 335 and 336: Customize Status Display 9-39 Defau
Page 337 and 338: Copy The following settings are ava
Page 339 and 340: Auto % Priority 9-43 Default Settin
Page 341 and 342: Send The sending settings allow you
Page 343 and 344: Default Screen Use this procedure t
Page 349 and 350: File Separation Set whether transmi
Page 351 and 352: Quick Setup Registration 9-55 Defau
Page 355 and 356: Duplex Select the binding orientati
Page 357 and 358: LF Action Set the line feed action
Page 359: Report 9-63 Default Setting (System
Page 363 and 364: Adjustment/Maintenance Adjust print
Page 365 and 366: Correcting Black Lines 9-69 Default
Page 367 and 368: Auto Correction Follow the steps be
Page 369 and 370: Tone Curve Adjustment 9-73 Default
Page 371 and 372: Date/Timer Date/Timer settings incl
Page 373 and 374: Panel Reset Timer 9-77 Default Sett
Page 375 and 376: Interrupt Clear Timer 9-79 Default
Page 377 and 378: E-mail Address 9-81 Default Setting
Page 383 and 384: Address Book Type 9-87 Default Sett
Page 387 and 388: Activating/Deactivating Application
Page 389 and 390: System Initialization Initialize th
Page 391 and 392: TCP/IP (IPv4) Setup 9-95 Default Se
Page 393 and 394: RA (Stateless) Settings 9-97 Defaul
Page 397 and 398: Enhanced WSD (SSL) 9-101 Default Se
Page 399 and 400: LDAP Security 9-103 Default Setting
Page 401 and 402: POP3 Security (User 3) 9-105 Defaul
Page 403 and 404: Interface Block Setting 9-107 Defau
Page 405 and 406: The procedure is as follows. 1 Pres
Page 407 and 408: Accessibility Display (Enlarged Tou
Page 409 and 410: 10 Management This chapter explains
Page 411 and 412:
User Login/Job Accounting - User Lo
Page 413 and 414:
Adding a User (Local User List) Thi
Page 415 and 416:
User: - Account Name Select account
Page 417 and 418:
10-9 Management Deleting a user 1 P
Page 419 and 420:
Group List 10-11 Management Registe
Page 421 and 422:
User Login/Job Accounting - Guest A
Page 423 and 424:
Obtain NW User Property 10-15 Manag
Page 425 and 426:
Simple Login Settings 10-17 Managem
Page 427 and 428:
Simple Login Key: - User Enter logi
Page 429 and 430:
Login/Logout If job accounting is e
Page 431 and 432:
Managing Accounts This changes the
Page 433 and 434:
[Total] selected for Copy/Printer C
Page 435 and 436:
Available Settings [Split] selecte
Page 437 and 438:
Total Job Accounting 10-29 Manageme
Page 439 and 440:
User Login/Job Accounting - Paper S
Page 441 and 442:
Unknown ID Job 10-33 Management The
Page 443 and 444:
11 Maintenance This chapter describ
Page 445 and 446:
Y C M K 11-3 2 Gently lift the tone
Page 447 and 448:
11-5 9 Push the toner container all
Page 449 and 450:
11-7 5 Install a new waste toner bo
Page 451 and 452:
11-9 Maintenance 4 Insert the new s
Page 453 and 454:
Slit Glass 11-11 Maintenance If bla
Page 455 and 456:
12 Troubleshooting This chapter exp
Page 457 and 458:
Symptom Checkpoints Corrective Acti
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Message Checkpoints Corrective Acti
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Responding to Send Error 12-15 Trou
Page 471 and 472:
Error Code 2102 2103 2201 2202 2203
Page 473 and 474:
Precautions with Paper Jams 12-19 T
Page 475 and 476:
Optional Cassettes 3 and 4 12-21 3
Page 477 and 478:
12-23 Troubleshooting 3 Pull up rig
Page 479 and 480:
Inner Tray / Fixing unit Follow the
Page 481 and 482:
Document Processor Follow the steps
Page 483 and 484:
Job Separator Follow the steps belo
Page 485 and 486:
Document Finisher (Option) If a pap
Page 487 and 488:
12-33 Troubleshooting 5 Re-install
Page 489 and 490:
Appendix • Optional Equipment ...
Page 491 and 492:
Appendix-3 Key Counter DT-730 Docum
Page 493 and 494:
Data Security Kit (E) The Data Secu
Page 495 and 496:
Upper-case Letter Entry Screen Numb
Page 497 and 498:
Paper This section explains the pap
Page 499 and 500:
Measurements in the table take into
Page 501 and 502:
Specially treated paper: We do not
Page 503 and 504:
Thick Paper Before loading thick pa
Page 505 and 506:
Specifications IMPORTANT: Specifica
Page 507 and 508:
Copy functions Item Description Cop
Page 509 and 510:
Document Processor Original Feed Me
Page 511 and 512:
Glossary Accessibility The machine
Page 513 and 514:
IPP IPP (Internet Printing Protocol
Page 515 and 516:
USB (Universal Serial Bus)2.0 A USB
Page 517 and 518:
Index Numerics 2-sided/Book Origina
Page 519 and 520:
D Moving a Document 7-10 Printing D
Page 521 and 522:
I Image Repeat 4-27 Included Guides
Page 523 and 524:
Size xxxviii Original Auto Detect 9
Page 525 and 526:
Entry Check for New Dest. 9-46 File
Page 527 and 528:
Z Zoom 3-11 Zoom Copying Auto Zoom
Page 530:
TA Triumph-Adler GmbH Betriebsstät
show all

2550ci - TA Triumph-Adler GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?