2550ci - TA Triumph-Adler GmbH

Interrupt Clear Timer
9-79
Default Setting (System Menu)
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of Interrupt Clear Timer.
3 Press [+] or [-] to enter the time for the interrupt clear timer.
4 Press [OK].
Error Job Skip
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error occurred when
the job was started is automatically skipped after a set period of time elapses. The period of time can be set
within the range 5 to 90 seconds (increments of 5 seconds).
NOTE: When a job is skipped, it is moved to the end of the job queue.
The procedure for setting the Error Job Skip is explained below.
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of Error Job Skip.
3 Press [Off] or [On].
4 If you selected [On], set the time until the job is skipped with [+] or [-].
5 Press [OK].
9