2550ci - TA Triumph-Adler GmbH

10-9
Management
Deleting a user
1 Press [Delete].
2 Press [Yes] on the screen to confirm deletion.
The selected user will be deleted.
For a user without administrator rights who logs in (User Property)
These users can partially change their own user properties including user name, login password, and E-mail
address.
Although login user name, access level, or account name cannot be changed, the users can check the present
status.
Use the procedure below to change user properties.
1 Press the System Menu key.
Status
User:
User Name:
01 User
Login User Name:
0099
Access Level:
User
E-mail Address:
abcd@efg.com
Change
Detail
Change
Local Authorization
Login Password:
**********
Account Name:
02Account
ID Card Information:
Empty
Cancel
Change
Detail
Select whether or not to use Local Authorization.
Use the procedure below.
Save
12/12/2011 10:10
NOTE: The default user with administrator
rights cannot be deleted.
2 Press [User Property].
3 Refer to steps 6 to 19 of Adding a User (Local User
List) to change user properties.
Press [Detail] of Login User Name or Account
Name to check the present status.
4 Press [Save] to finalize changed user properties.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
4 Press [Next] of User Login Setting and [Change] of
Local Authorization.
5 Select [Off] or [On].
6 Press [OK].
10