12.06.2013 Views

WACKER: VINNAPAS Product Overview Europe ... - Wacker Chemie

WACKER: VINNAPAS Product Overview Europe ... - Wacker Chemie

WACKER: VINNAPAS Product Overview Europe ... - Wacker Chemie

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ConCrete rePair –<br />

ConCrete solutions<br />

Concrete is used more than any other<br />

man-made material in the world. As<br />

of 2006, about 7.5 cubic kilometers of<br />

concrete are made each year, more<br />

than one cubic meter for every person<br />

on earth.<br />

Concrete is a very durable construction<br />

material; however, in today's<br />

environmental conditions, it can be<br />

damaged by carbonation of the<br />

46<br />

VinnaPas ® standard ProduCts<br />

These dispersions increase adhesion<br />

of the mortar to the concrete substrate.<br />

<strong>VINNAPAS</strong> ® dispersions for 2K<br />

cementitious systems ensure good<br />

processing, preventing the thin<br />

layers from drying too quickly, raise<br />

Also Recommended<br />

Architectural paints modified with<br />

<strong>VINNAPAS</strong> ® dispersions can also be<br />

used as topcoat – please see<br />

www.wacker.com/construction<br />

or www.wacker.com/vinnapas<br />

concrete and corrosion of the steel<br />

reinforcement. For concrete<br />

renovation, mortars modified with<br />

<strong>VINNAPAS</strong> ® dispersions offer crucial<br />

benefits: they improve adhesion to<br />

installed concrete and steel, increase<br />

deformability and flexural strength,<br />

lower the elastic modulus and improve<br />

workability and wetting properties.<br />

They also reduce the ingress of<br />

the level of impermeability to CO2 and<br />

pollutants such as road salt, and improve<br />

freeze / thaw resistance.<br />

substances causing carbonation of<br />

the concrete cover, and of substances<br />

that corrode the steel reinforcement.<br />

The first step is to clean the surface,<br />

remove all the affected concrete and<br />

sandblast the steel bars if required.<br />

A primer is then applied, followed by<br />

a base mortar. Then a finer mortar is<br />

applied prior to a final topcoat.<br />

<strong>VINNAPAS</strong> ® 530 ND<br />

A product which reduces the elastic<br />

modulus and enhances adhesion

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!