You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SCSI</strong> user guide<br />
3. Grasp the lid firmly and slide it towards the rear of the computer so that it comes free.<br />
4. Remove the metal blanking panel found at the rear of the computer by unscrewing the two screws<br />
at each side.<br />
5. Remove the interface card from the packaging. (Note: Use the conductive bag that the kit came in<br />
to place the interface on. This reduces the risk of static damage.)<br />
6. Place the <strong>SCSI</strong> interface card over the interface card sockets with the panel facing the rear of the<br />
computer. Then with the pins located over the sockets push the interface card firmly downwards so<br />
that the pins enter and locate into the sockets.<br />
7. Refit the lid as described in the computer's "Welcome <strong>Guide</strong>" and switch on the computer.<br />
8. The hardware installation is now complete. Please see section headed <strong>SCSI</strong> software.<br />
Page 6