Installation (GB) - Kamstrup
Installation (GB) - Kamstrup
Installation (GB) - Kamstrup
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
55121138_A1_<strong>GB</strong>_03.2012<br />
<strong>Installation</strong> Guide<br />
Z-Wave® Slave<br />
(plug-in)<br />
<strong>Kamstrup</strong> A/S<br />
Industrivej 28, Stilling<br />
DK-8660 Skanderborg<br />
Tel: +45 89 93 10 00<br />
Fax: +45 89 93 10 01<br />
info@kamstrup.com<br />
www.kamstrup.com
Commissioning<br />
The module is equipped<br />
with a green light-emitting<br />
diode (LED) – see the picture<br />
shown.<br />
When the module is<br />
connected to a Z-Wave<br />
network, the green LED turns<br />
on.<br />
Network<br />
LED<br />
Network<br />
Inclusion/Exclusion<br />
To connect to a Z-Wave<br />
network, set the Z-Wave<br />
controller to inclusion mode,<br />
and press the push button<br />
“network” on the module<br />
3 times until the green LED<br />
turns on.<br />
To disconnect from a Z-Wave<br />
network, set the controller to<br />
exclusion mode, and press<br />
the push button “network”<br />
3 times until the green LED<br />
turns off.
Change language