View Full Issue - Thomas Industrial Media

page 

page 

20 

page 

10 

THREE-PHASE MOTORS 

with permanently attached FCs 

RUHRGETRIEBE 

For SLI: enter 20675 at www.tim-info.com/ien 

page12 

32 allows installation within seconds 

MTS SENSOR TECHNOLOGIE 

CONNECTOR SYSTEM 


page 

36 

INFRARED THERMOMETERS 

offer continuous temperature monitoring 

RAYTEK 


COLOUR E-PAPER DISPLAY 

offers high resolution and improved brightness 

NEMOPTIC 


WIRELESS SENSING SOLUTION 

in IP67 enclosures, with four discrete I/Os 

BANNER ENGINEERING 


November 2007 - Volume 33 

SPECIAL 

FOCUS 

VISION & IMAGING 

PP. 6-14 

MOTORS & DRIVES 

PP. 18-23 

CONTENTS 

Industry News . . . . . . . . . . . . 3 

Special focus: 

Vision & Imaging . . . . . . 6 - 14 

Motors & Drives . . . . . . 18 - 23 

Literature Reviews . . . . . . . . 16 

Calendar of Events . . . . . . . 42 

Companies in this Issue . . . 42 

Technology in Action . . . . . . 43

2 Issue N°11 • November 2007 SLI: Get detailed info within seconds by internet www.tim-info.com/ien or by e-mail. See page 44 for instructions. 


SAATCHI & SAATCHI - Getty Images / K.Steele. 

NEXANS AUTOMATION CABLES, AUTOMATICALLY RELIABLE. 

Our yearlong partnership with the 

automation industry proves that reliability 

is key. Robot producers, assembly line 

integrators, producers of welding clamps, 

among others, have been working with 

high quality Nexans cables for years 

now. Robot cables, bus cables, chain 

cables and sensor cables, all from one 

source. From design to installation we 

accompany you: from engineering and 

design to on-site logistics services. Safe, 

superior solutions for industry automation 

is what we stand for. With Nexans’ 

cables, your customers will acknowledge 

your reliability. 

www.nexans.com marcom.info@nexans.com 


HSW DW-D 

HSW DW-K 

Flow under control 

The key points for monitoring and 

measuring fluid media: HSW flow 

switches and flow transmitters. 

High quality and dependable. 

Solutions for reliable control and 

monitoring of heat exchangers, 

compressors, turbines, welding 

devices, furnace systems, X-ray 

appliances and many more. 

We would be pleased to give 

you a presentation of other 

products and individual solutions – 

simply get in touch with us! 

HSW – 

Your competent partner for 

high-quality instruments 

for flow measurement and 

monitoring. 

Tec-line 

Henke-Sass, Wolf GmbH 

P.O. Box 4259 

78507 Tuttlingen 

Keltenstrasse 1 

78532 Tuttlingen 

Germany 

Phone: +49 (0) 74 62/94 69-25 

Fax: +49 (0) 74 62/94 69-13 

www.henkesasswolf.de 

g.schnell@henkesasswolf.de 

At the core of performance 

Global expert in cables 

and cabling systems 

Operator Panels 

for applications with limited space 

Exter K10m and Exter K20m 

panels have a keypad interface 

and a monochrome display. 

These panels are suitable 

for applications where 

machine and process parameters 

needs to be viewed 

and set. Parameter settings 

are facilitated by the numerical keypad, and the six function 

keys can be programmed to represent the most frequently 

used commands. They have an IP66-rated front 

and built-in support for alarm-handling, multilanguage 

and recipe management. Communication ports for 

RS232/422/485 are also built-in. As an extra bonus for 

a small panel like this, you also benefit from an optional 

Ethernet connection. This option is suitable when using 

the panels in Ethernet-based control and motion systems. 

The panels are equipped with monochrome FSTN 

displays. They offer a resolution of 160x32 pixels and 

240x64 pixels, which enables the use of for instance Asian 

and Russian characters. The displays also have dimmable 

backlight so that they easily can be optimized for 

the surrounding light conditions. 

BEIJER ELECTRONICS 

Tel. +46-40-358600 • Fax +46-40-932301 


Rail Mounted Terminal Blocks 

for wire sizes from 6 to 95mm 2 

The 285 Series railmounted 

terminal 

blocks accept all 

types of wires from 

6mm 2 to 95mm 2 . 

The three versions 

of the blocks are 

suitable for applications 

with rated currents up to 232A. These terminal 

blocks are suitable for side entry wiring and even larger 

cables, which are flexible to a limited degree, can be 

connected without a problem. A special feature makes 

it even easier: The clamps can be adjusted using one button 

in an open condition. Therefore, the user can use 

both hands to insert the wires into the clamping position; 

at 95mm 2 , a real labour saving enhancement. All 

that is required to open the clamping mechanism of the 

terminal blocks is a standard hex wrench or a screwdriver 

when using the smallest version of the terminal 

block. A voltage tap is available that can be fitted into 

the jumper contact slot. Using this, the supply voltage 

for L.V. and service connections can be tapped 

without the need for any additional terminal blocks. 

WAGO KONTAKTTECHNIK 

Tel. +49-571-8870 • Fax +49-571-887169 


Measurement Transmitter 

current or voltage to Modbus RS485 

The SIAi-8 DIN is a rail mounting, 

8 inputs, current or voltage 

to Modbus RS485 transmitter. 

This module can be 

used as part of larger systems 

where you can to integrate 

a remote e.g. temperature, 

pressure, level, flow, humidity 

or any other measurements. 

The module is used 

to measuring values from 8 

analogue inputs via the RS-485 

connection. It finds application 

in distributed control 

and visualization systems. 

Standard functions of Modbus 

transmission allow changing 

of device address or detect its type. All the functions, 

available via the RS-485, can be implemented from 

any typical visualization software or from operator 

panel. It features galvanic separation of the analogue 

inputs from the module supply voltages. Input signals 

are connected by means of the socket-plug connectors. 

SIMEX 

Tel. +48-58-7620777 • Fax +48-58-7620707 

For SLI: enter 20716 at www.tim-info.com/ien

INDUSTRY NEWS INDUSTRY NEWS INDUSTRY NEWS INDUSTRY NEWS INDUSTRY NEWS 

SLI: Get detailed info within seconds by internet www.tim-info.com/ien or by e-mail. See page 44 for instructions. 

INDUSTRY NEWS 

Siemens opens new plant for large gears… 

Siemens Automation 

and Drives 

(A&D) has expanded 

assembly capacity 

for large 

gears at its 

Friedrichsfeld site. 

Gears for marine drives and the cement industry, 

and extruder gears for the plastics industry 

will be manufactured here in future in an 

area covering approximately 6,900m 2 . Following 

completion, roller grinding mills will be produced 

here for the cement or minerals industry 

with rated load torques up to 4,500,000 Nm. 

The plant will also produce twin-shaft extruder 

gears with shaft clearances of approx. 

300mm and a performance of up to 20,000 kW. 

In addition to these gears, twin-motor drives 

for the marine sector with 16,000 kW transmitted 

power per drive shaft will also be produced 

in the new hall at Friedrichsfeld. 

…while Harting new facility in China 

Harting Technology 

Group inaugurated 

new production 

facility in 

Zhuhai, China on 

October 19, 2007. 

Production is already 

running at full speed. The investment of 

12 million Euro in this first expansion stage is 

management's response to rising demand in the 

Asia Pacific markets. The production facilities 

cover some 20,000m 2 . A total of 250 employees 

turn out a broad product range. These 

tried and tested products serve markets in 

telecommunication, traffic and transport, machine 

construction and the energy industries. 

The company produces the tools and machines 

deployed in manufacturing at its headquarters 

in Germany. 

SCS for the first time in Lyon 

Lyon will be hosting SCS for the first time. 

This is the new trade show on industrial performance 

technologies: energy, automation and 

transmission/mechatronics. From November 

13 to 16, 2007, the 15,000 visitors will be looking 

for an answer to their specific requirements 

among the offer of Systems, Components 

and Solutions for industry and large infrastructures, 

presented by the 300 exhibitors 

at Lyon Eurexpo. 

SPS/IPC/DRIVES as ususal in Nuremberg 

More and more novelties and outstanding 

products will be presented during SPS/IPC/DRI- 

VES in Nuremberg. From 27 – 29 November 2007 

more than 1,200 exhibitors will present their 

products there, of which more than 200 companies 

will be from abroad - 19% (2006: 17%) 

of the total number of exhibitors. This year a 

space of more than 80,000m 2 in ten exhibition 

halls will be occupied, which is another 2,500m 2 

more compared to 2006. For the first time 

hall 2 and hall 4 of the Nuremberg exhibition 

ground will be opened as well. 

Sartorius sells bearings business to Smiths 

Sartorius signed an agreement with the British 

technology group Smiths to sell German-based 

Sartorius Bearing Technology to this Group. According 

to the agreement, the Smiths Group 

will retroactively purchase all of the shares in 

the hydrodynamic bearing company. The purchase 

price is approx. 20 million Euros. Sartorius' 

unit is to be integrated into the John 

Crane business of Smiths, which focuses on 

the design and manufacture of seals. John 

Crane will take on all 100 employees. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Complete and integrated automation solutions. 

 

 

 

 

 

Issue N°11 • November 2007 3 

 

 

 

 

 


DRIVE ING OK-163x236-new-conv.in1 1 22-10-2007 14:52:04


WWW.BOKERS.COM/IENEU 


AEROTECH 

Air Bearing Positioning Solutions 

for Every Application 

Miniature Air-Bearing Stages 

Highest performance miniature airbearing 

stages - travel to 150 mm 

Fully preloaded for ultra high precision 

alignment and assembly 

Linear encoder feedback provides 2 

nm resolution (62 picometre resolution 

with the Automation 3200) 

Direct-drive brushless linear servomotor 

Air-Bearing, Direct-Drive Rotary Stages 

Exceptional error motion and wobble 

performance 

Direct-drive slotless brushless 

servomotor for outstanding velocity 

and in-position stability 

Direct coupled, high accuracy rotary encoder 

provides resolution to 0.036 arc-sec 

Low profile, planar design 

Long Travel Air-Bearing Stages 

Fully preloaded air-bearing 

Ultra-smooth design for outstanding 

velocity stability 

Travel range to 1.2 metre 

Linear encoder or laser 

interferometer feedback 

Complete noncontact design 

Active air preload on all air-bearing 

surfaces 

Integrated XY subsystems including 

granite base 

Linear encoder or laser 

interferometer feedback - travel 

range to 1 metre 

High stiffness for heavy loads and excellent 

geometrical performance 

Fully preloaded air bearings 

for ultra smooth motion 

Dual linear servomotor 

driven lower axis - travel to 

1 m x 1 m 

Customised designs available 

Options include: machine base, z 

axis, vibration isolation, and control 

enclosures 

Aerotech Ltd. 

Jupiter House, Calleva Park, Aldermaston 

Berkshire RG7 8NN, United Kingdom 

Tel: +44 (0)118 940 9400 

Fax: +44 (0)118 940 9401 

Email: info@aerotech.co.uk 

Dedicated to the 

Science of Motion 

ABL1000 

ABRS Series 

ABL2000 

Long Travel Wide Base X-Y Air-Bearing Stages 

ABL8000 

Gantry Air Bearing X-Y Positioning Systems 

ABG10000 

www.AEROTECH.co.uk 


Twistable Cable 

in tin-plated copper shield sheath 

Chainflex CF Robot 

is a shielded 

3D cable. The 

individual wires 

can withstand 

high levels of 

torsion. Areas 

of application 

include both 

numerous robotic 

applications and non-robotic applications, such 

as rotary tables or spindle drives that have to be supplied 

with high power levels. In contrast to conventional 

braided copper shields, which are counter-wound, 

a torsion-resistant tin-plated copper shield sheath is used 

with this cable. The forces effected on the cable by torsional 

movement are largely absorbed by sliding and 

buffer elements between the sheath, shield and insulation. 

This prevents early failure of the shield. The outer 

sheath material is a high-grade TPE mixture with especially 

good wear properties. The cable has already 

been tested with more than three million torsion 

movements to +/- 270°. 

IGUS 

Tel. +49-2203-96490 • Fax +49-2203-9649222 


Stop Button 

for Pico-Guard system 

The Pico-Guard E-Stop Button works in conjunction 

with the Pico-Guard Controller and other optical elements 

in personnel safety and equipment protection applications. 

The E-Stop Button is used with plastic fiber optic 

cable and offers a simple, quick means of connecting 

and disconnecting the fiber. Models are available with 

fiber entry/exit from either the same side or opposite 

sides of the housing. When paired with the Pico-Guard 

Controller, the E-Stop Button meets Safety Category 4 

applications. 

BANNER ENGINEERING 

Tel. +32-2-4560780 • Fax +32-2-4560789 


Thermal Imager 

with high-quality germanium optics 

The thermal imager testo 880 offers 

roughly 20,000 measurement 

values, exactly 160x120 

pixels interpolated to 320x240 

pixels. It allows reliable diagnoses 

on a crystal clear 3.5" display. The 

screen is fully used without any 

limitations due to menus. The 

visibility of even the smallest 

temperature diffferences is 

guaranteed by high-quality germanium 

optics with optimum IR exploitation. The electronics 

developed for the optimum utilization of the detector 

and the the thermal resolution of


Electronic Valves 

for oxygen applications 

The new 

Oxygen 

Clean Serieselectronic 

valves, 

available 

in 2-way 

or 3-way, normally-closed or fully 

ported, are designed for use with 

oxygen applications and work with 

air and inert gas. Using a proven 

unique patented valve system they 

feature a power consumption of only 

0.67 watts, a response time of 5 to 

10 milliseconds, and voltages of 6, 12, 

or 24VDC. They are ultrasonically 

cleaned, assembled, inspected and 

tested in an enclosed controlled area 

with a High Efficiency Particulate 

Air (HEPA) filtration system. 

CLIPPARD INSTRUMENT LAB 

Tel. +1-513-5214261 

Fax +1-513-5214464 

For SLI: enter 20194 

at www.tim-info.com/ien 

Security Audio Box 

for safety applications 

The bBox electronicstandalone 

sound 

box is a complete 

stereo 

mp3 modular 

player/repeater 

solution for interactiveapplications. 

It uses 

standard 

Flash MMC cards (MultiMediaCard) or 

SD (Secure Digital) to store the sound content. 

It has from 32MB to 8GB (up to 500h 

voice record). These small equipments 

start the adequate audio tracks by simple 

dry contacts or relay (NO Normally 

Opened, or NC Normally Closed), by a 

serial port (RS-232/485), or via the network 

(wire or wireless, ZigBee model on 

testing). 

REALITY SYS 

Tel. +32-4-2522850 

Fax +32-4-2529696 



Industrial PC 

rugged design 

These IPCs 

h a v e 

rugged, 

field-testedhardware 

for 

use under 

the most 

difficult 

conditions. An industrial-grade touch 

screen with a protective overlay enables 

the user to securely input data 

via the clearly designed user interfaces, 

while a diverse array of processors, 

working memories, and bulk 

memories make the systems suitable 

for a range of assignments. A closed 

housing with IP65 protection provides 

for a well-designed climate 

management system and use in clean 

rooms. 

SARTORIUS 

Tel. +49-551-3080 

Fax +49-551-3083289 



Optical Switching Solution 

housed in compact 1U high form factor 

The 60-850 (single 

mode) and 60-851 

(multimode) optical 

switching solutions 

offer 8 way 

and 16 way MUX 

configurations 

with a variety of 

connector options to suit a range of applications. The switching 

system is housed in a compact 1U high form factor, making it wellsuited 

for use in rack mounted applications. All optical connections 

are provided on the front panel and include captive dust 

covers to protect the connectors when they are not in use. 

PICKERING INTERFACES 

Tel. +44-1255-687900 • Fax +44-1255-425349 


Our vision is 

a simple solution. 

Austria 

Intermadox GmbH 

Ph: 01-486 15870 

Belgium 

Multiprox N.V. 

Ph: 053-766566 

Denmark 

H Folsgaard AS 

Ph: 043-20 86 00 

Finland 

Oy E. Sarlin AB 

Ph: 09-504 441 

France 

Turck Banner SAS 

Ph: 01-60 43 60 70 

Germany 

Banner GmbH 

Ph: 0231-96 33 730 

Italy 

Turck Banner srl 

Ph: 02-90 36 42 91 

Netherlands 

Turck B.V. 

Ph: 038-4227750 

Norway 

Danyko A.S. 

Ph: 037-040288 


Spain 

Elion SA 

Ph: 34-93-298-20-40 

Sweden 

HF Sweden 

Ph: 08-555 409 85 

Switzerland 

Bachofen AG 

Ph: 044 944 11 11 

United Kingdom 

Turck Banner Ltd 

Ph: 01268-578 888 


Plug-in and Tunable Transceiver 

first 10 Gbps for DWDM Optical Communication 

The MF-10KWXF series is 

said to be the first worldwide 

compact and pluggable 

10 Gbps optical 

communications transceiver 

that is capable of 

optional tuning of 

DWDM (Dense Wavelength 

Division Multiplexing) 

in the entire Cband. 

The transceiver 

complies with the 10Gbps form factor industrial standard XFP-E (Small 

Form Factor Pluggable Extended) MSA (Multi-Source Agreement). 

MITSUBISHI ELECTRIC 

Tel. +49-2102-4861550 • Fax +49-2102-4867220 


Powerful vision that 

makes your job easier. 

Simple, common interface. 

Intuitive, three-step, point-and-click 

setup with quick 

TEACH makes 

all Banner vision 

sensors easier 

to install and 

operate. Set up 

with or without a PC. 

Different models 

for different 

applications. 

Choose from 

multiple vision 

and analysis 

tools, imager resolutions and 

housing confi gurations. 

Extensive 

range of 

accessories. 

A full selection of 

lighting and lenses, 

plus enclosures, monitors, 

brackets, cables and more. 

SLI: 20527 

SLI: 20528 

SLI: 20529 

Worldwide application support. 

Banner is always close by to help you 

effectively apply our vision sensors. 

See our web site to contact your local 

support offi ce. 

SLI: 20530 

Banner Engineering Europe 

Park Lane, Culliganlaan 2F • B-1831 Diegem, Belgium 

Tel: +32 2 456 07 80 • Fax: +32 2 456 07 89 

E-mail: mail@bannereurope.com 

www.bannereurope.com

6 Issue N°11 • November 2007 




Vision & Imaging 

Multi-core systems accelerate 

industrial image processing 

With the introduction of multi-core technology, an immense 

potential is opening up for industrial image processing (IIP) 

because expensive high-end server systems can now be replaced 

with standard embedded computer technology. Even IIP 

systems based on single-core embedded processors can quickly 

be converted via software. In this respect, IIP is one of the first 

sectors that will develop new solutions using the new multi-core 

technology 

Increasing computing power and ever more sensitive 

digital image sensors, together with falling costs, make 

industrial image processing interesting for more 

and more manufacturing applications. Accurate and 

automatic classification of products, pick & place 

applications, automatic selection processes, and integrated 

quality checks are also of interest for more 

cost-sensitive productions and can improve longterm 

quality, minimize defective products, increase 

output and increase overall productivity. Already 

IIP is found in applications from the sheeting industry 

(textiles, steel, paper, etc.) to the automotive 

and electronics industry all the way to the food industry. 

In future, applications such as recognition of 

text on electronic components, measurement and surface 

checking of engine blocks or checking that all 

the correct furniture fittings are present in their 

foil packages, under critical light conditions and 

with elements lying on top of one another, will 

bring IIP to still more markets. 

From a technical perspective, the type of production 

process in which image processing takes place is almost 

irrelevant, because all the current and future 

IIP systems will, in theory, be constructed identically. 

Depending on the application, one or more camera 

heads deliver line or matrix images from different 

perspectives with appropriate lighting to the 

IIP computer connected to the higher-level process 

control. The modular image processing software uses 

various application-specific filters (e.g., sharpening, 

finding edges, etc.) to edit and analyze the image 

data. This process is very processor-intensive. 

IIP does use a so-called expert system that is trained 

or optimized for the particular application, but 

nonetheless computing power is frequently a bottleneck. 

Industrial image processing, multi-core reference 

application 

Falling hardware costs and increasing CPU performance 

mean that IIP can now be used in applications 

in which it previously was either unprofitable or 

impossible because of insufficient computing capacity; 

for example, in checking mass-produced, inexpensive 

goods or in checking especially complex or 

organic objects. With the introduction of multi-core 

technology, which allows different processes to run 

in parallel on a single system, new horizons are 

opening up in the industrial market. In this respect, 

IIP is a reference application for multi-core technology 

in the automation sector, whether through 

multi-threading in the case of synchronous multi-processing 

with double computing performance or 

through asynchronous multi-processing and virtualization 

with simultaneous IIP and Soft PLC on one system. 

With more CPU performance, even the most complicated 

testing tasks can be carried out and a greater 

number of parameters can be analyzed and evaluated 

simultaneously. 

Quick software porting 

The advantage of multi-core technology-the parallelization 

of processes - is a challenge for many applications, 

because multi-core technology hardware 

development is ahead of software development and 

the high computing performance is of little use if it 

cannot effectively be carried through to the production 

line. In many areas of automation, software 

optimized to use the particular advantages of multiple 

computing cores efficiently is just emerging. However, 

this is precisely these in which IIP profits directly 

from the increase in performance: the modular design 

of the IIP software is ideally suited for multi-threading, 

i.e. the parallel processing of several tasks. The 

application-specific filters, for example, can be apportioned 

to the two CPU cores and thus the image 

processing takes place about twice as fast. Likewise, 

it is possible to replace two systems with a single one. 

In the past, application developers have had to resort 

to multi-processor systems for complex image processing 

tasks, implementing two or more server 

processors on special server mainboards, which were 

prohibitively expensive for more cost-sensitive applications. 

However, the software of these solutions, which 

were previously too expensive to be widely disseminated, 

can be ported quickly, simply and inexpensively 

onto comparatively inexpensive multi-core hardware. 

Thus, OEMs and users profit directly from 

the introduction of multi-core technology through 

a shorter time-to-market, low system costs and CPU 

performance that is nearly doubled in comparison to 

previous single-core embedded processors. 

KONTRON 

Tel. +49-8165-77777 • Fax +49-8165-77279 


Viewer 

for inspection sensors 

The SensorView 350 is a compact, 

industrial, panel-mount display for its 

Checker 200 Series inspection sensors. 

It allows operators to view production 

images of the parts that Checker 

is inspecting without a PC. The 

device features a simple interface 

for displaying images of passed or 

failed parts, along with status indicators 

and results statistics to more 

easily monitor the production process. 

COGNEX 

Tel. +33-1-47771550 

Fax +33-1-47771555 



IR Camera 

for demanding applications 

The Adamant IR camera is a compact 

thermal surveillance system featuring 

a 640x512 MCT 15 micron 

pitch focal plane array and three 

field of view optic packaged in a fully 

mil-spec, marine qualified enclosure 

weighing 9kg. The triple 

field of view lens features a wide 

21.7° x 17.5° FOV, a medium range 

6.9°x 5.5° FOV and a narrow 1.7° x 

1.4° FOV enabling detection of a target 

at 16km. 

CEDIP INFRARED SYSTEMS 

Tel. +33-1-60378078 

Fax +33-1 64113755 



Touchscreen LCD 

with improved brightness 

Conventional 

touch 

screen displays 

have a 

laminated 

or bonded 

tactile film 

on top of 

the LCD 

panel but this solution integrates 

an optical sensor into each pixel. 

Consequently, the display provides increased 

backlight transmissibility for 

an improved brightness and image 

quality paired with a slim product design 

of less than 1mm thickness. 

Since each pixel reacts independently 

to changing ambient light conditions, 

tactile recognition based on simultaneously 

touching multiple 

points on the screen is possible. 

SHARP MICROELECTRONICS 

Tel. +49-40-23762286 

Fax +49-40-23762232 



Vision & Imaging Issue N°11 • November 2007 7 

Alarm Annunciator 

for hazardous area annunciation 

The PEX7250 Explosion Proof 

Alarm Annunciator is suitable 

for use in Zone 1 and Zone 2 hazardous 

areas. The use of ASIC 

technology removes any reliance 

on common control cards as all 

alarm cards in the annunciator 

can act as the master controller. 

The standard enclosure is copperfree 

cast alloy and finished in light grey two-part epoxy paint. The 

device is available in a range of sizes and shapes from one to 56 

points in a single enclosure, with a choice of three window sizes. 

Illumination is using high reliability, ultra-bright LEDs. 

RTK INSTRUMENTS 

Tel. +44-1423-580500 • Fax +44-1423-580501 


Step Beyond Infinity >> 

The Leica M205 C is the world’s first stereomicroscope with a zoom range of 

20.5x. This accomplishment, however, was not enough for Leica’s engineers. With 

the new FusionOptic Leica makes another step beyond previous limits. In addition 

to the increase in magnification, the resolution, too, has been increased to up to 453 

lp / mm, which corresponds to a structure size of 952 nm. 

The design principle of the new Leica M205 C is based on the exceptional flexibility 

of the brain. The microscope assigns a different task to each of the two beam paths: 

the right channel contains an image with very high resolution, while the left channel 

provides very high depth of field. The brain then automatically gathers the best information 

from both sources and uses it to compose one image with very high richness 

of detail. 

www.leica-microsystems.com/stepbeyondinfinity 


Progressive-Scan CCD Camera 

5 Megapixel 

The FC5100CL 2456x2058 

progressive-scan CCD camera 

supplies 15 frames/sec. Video 

signal output is 8/10 bit format, 

2 tap base configuration 

under Camera Link. The camera 

can get full resolution image 

at any timing using Randam 

electronic shutter. OSD 

function allows users to check settings on captured images. It features 

monitoring function for internal temperature of the camera. 

Serial controlling is provided via the camera link cable. The device 

is suitable for various high-speed images applications. 

KOATSU GAS KOGYO 

Tel. +81-6-63111371 • Fax +81-6-63111720 






Machine Vision Sensor 

largely maintenance-free 

The SRV is a vision sensor for industrial 

image processing, which 

is able to complete image processing 

tasks without any further 

peripheral equipment. It performs 

assembly and feature 

checks, recognizes damages on 

edges, detects the position of 

fastenings and labels, sorts and 

removes defective components. 

In pick & place applications, it 

makes sure that parts in all kinds 

of rotary positions are safely gripped. The compact 

housing of the sensor accommodates LEDs and an evaluation 

unit with all the necessary software and interfaces. 

It offers a high resolution of 720x480 pixels (W 

VGA) and a frame rate of 60fps. There is a choice of three 

operating distances (150, 300 or 450mm), each with different 

frame sizes (76x48, 117x72 or 129x81mm). Integrated 

industrial I/O interfaces (3 in, 3 out), one analogue 

output and a USB 2.0 connection to the graphical user 

interface are available. The position results can be 

transmitted via a serial interface. 

SCHUNK 

Tel. +49-7133-1030 • Fax +49-7133-103299 


Industrial Flat Panel Monitors 

for hazardous location 

The M-Series of industrial 

flat panel monitors 

is offered in three 

sizes, 15" (M1500), 

17" (M1700), and 19" 

(M1900). Their compact 

profile results in 

a panel mounted 

depth of less than 

70mm, making them suitable for installation in harsh 

environments for factory automation and demanding 

commercial applications. The monitors support XGA format. 

They all provide Analogue Video (VGA) connections 

and allow either connection via USB or RS-232 for the 

optional 5-wire analogue resistive touchscreen. The 

M1700 and M1900 additionally have Digital Video Inputs 

(DVI). All versions are standard with 100-240 VAC 

input power supplies and have IP65 NEMA 4/4x/12 panel 

mountable front panels. Stainless Steel front panels 

and 24V DC input power are available options for all three. 

The entire series is UL/cUL listed, complies with European 

CE and RoHS requirements, and are UL approved for Class 

I and II, Division 2 hazardous locations. 

NEMATRON 

Tel. +44-2392-268080 • Fax +44-2392-268081 



Thermal Imager 

for industrial maintenance 

The easy-to-use Fluke 

Ti35 is fully radiometric 

and features a 180° 

articulating lens for 

viewing and capturing 

images in areas 

with poor accessibility. 

The thermal imager 

offers high thermal 

sensitivity to 0.1°C 

using a 160x120pixel detector for viewing even the 

smallest temperature differences across a wide -20 to 

350°C range. A large 12.5cm high-contrast colour LCD 

provides clear pictures, irrespective of lighting conditions. 

This makes it suitable for the capture of high quality images 

in a broad range of industrial applications, including 

predictive maintenance, process monitoring, repair 

checks and quality control. The device sports the 

SmartFocus feature, for single finger capture of the best 

quality images and accurate temperature measurements. 

The Fluke Ti35 comes as a complete kit which includes 

a compact flash card for storing over 1,000 images, 

a hard carry case and PC software. 

FLUKE 

Tel. +31-40-2675212 • Fax +31-40-2675210 


Ethernet Camera 

for mobile applications 

The O2M100 Ethernet camera 

meets the requirements of 

mobile control systems caused 

by extreme environmental influences. 

It has fully sealed 

die-cast zinc housing with the 

protection rating IP67. The 

two integrated M12 connectors 

provide important connections 

for supply and communication. 

When mounting, the unit with the dimensions 

80x42x53.5mm (HxWxD) can be fixed directly to the mobile 

machine via an adapter system. With temperature-controlled 

window heating, the camera objective 

can be defrosted in case of extreme conditions. The digital 

capturing and transmission of the image data enable 

scaling and free positioning of the camera image. 

The image data are on the one hand stored in a UDP/IP 

protocol and on the other hand stored as 8-bit Windows 

bitmap. The device is fitted with an Ethernet interface 

for communication. In contrast to analogue camera 

systems, the camera image can be shown on any number 

of displays via a simple Ethernet hub or switch. 

IFM ELECTRONIC 

Tel. +49-201-2422411 • Fax +49-201-2422401 


Shadowgraph Camera 

with in-built velocity trap 

Modern image sensors 

have allowed the design of 

cameras that will capture 

up to 11-million pixel 

images with the ability to 

shutter faster than 1µs. Integrating 

this camera with 

an ultra-fast high intensity 

spark source has resulted 

in a Shadowgraph camera 

capable of image quality previously achievable 

only with film cameras, yet offering instantaneous 

access to data. Control software provides simple adjustment 

of imaging parameters and extensive measurement 

tools to accurately analyse results. Camera stations can 

be arranged in the classic configuration looking 

directly at a reflective screen or as orthogonal pairs to 

provide valuable 3D data such as the pitch and yaw of 

supersonic airflows. A comprehensive triggering functionality 

has been implemented in the SIS camera 

system enabling it to be interfaced with almost any triggering 

device. Applications include aeronautical 

engineering and testing of glass. 

SPECIALISED IMAGING 

Tel. +44-1442-827728 • Fax +44-1442-822847 


Colour Sensors 

flexible in application 

The colorControl line 

of colour sensors come 

as optical fibre sensors 

or as reflex optical 

sensors with ranges 

from 2 to 1,200mm 

and a light spot diameter 

of 0.5 to 70mm 

for large-area integral 

colour evaluations through to colour cable detection as 

of diameters of 0.5mm. The reflex colour sensors have 

point-focal illumination optics as well as large-surface 

diffuse optics, which light up a surface from various angles. 

The advantage here is that gloss effects on surfaces 

can be reduced or eliminated, which standard sensors 

are not able to do. These sensors apply the "true 

colour" measuring principle and can reliably recognise 

shades of colour in the range of ∆ε=1. Dual-channel 

versions are also available. In this case one channel 

can be used as a reference while the other channel constantly 

observes a colour flow for any deviation. The series 

comprises 3, 4, 8, 31 and 250 colour memories 

with up to 25,000 colour comparisons per second. 

ELTROTEC SENSOR 

Tel. +49-7161-98872300 • Fax +49-7161-98872303 


Vision and Inspection Tools 

innovative additions 

The MSX-500Di is a small, 

lightweight, 2.11 megapixel 

digital CCD microscope. Featuring 

an integrated 3.5-inch 

LCD monitor, flash memory 

storage and offering magnification 

up to 500x it is the 

perfect stand-alone unit for 

micro-inspection and data 

archiving. Available in wide 

and narrow beam size configurations, the MSSP High 

Power LED series is a new addition to the MG-WAVE LED 

lighting range. Offering bright and even illumination, 

coupled with low power consumption, MSSP LED's 

offer many benefits for illumination around the workplace 

and in automotive applications. Designed for 

use with large format megapixel cameras the new ML- 

0310VF Macro Lens were developed to provide the required 

accuracy to inspect large area components in high 

resolution. Incorporating a variable iris and varifocal 

zoom the new Macro lens is able to achieve a variable 

depth of field making it suitable for applications including 

PCB and wafer inspection. 

MORITEX 

Tel. +44-1223-301148 • Fax +44-1223-301149 


Gigabit Ethernet Camera 

with plug and play camera manager 

The 1000BaseT day 

of the uEye camera 

range is a camera 

with a Gigabit Ethernet 

interface. The 

camera supports a 

range from 6 to 24V 

typically used in mechanicalengineering. 

The models are also equipped with a C-mount 

lens connector with adjustable mounting dimensions. 

A symmetrical housing permits mounting at 90/180 

degrees without having to create new holders. Besides 

a trigger input and a flash output, it has a RS232 

interface and two GPIO ports that can be used either 

as digital inputs or digital outputs. Inside the camera, 

two processor cores provide superior performance. 

The Plug and Play Camera Manager makes installation 

and integration just as easy as with the USB versions. 

The software development kit is identical, which means 

that upgrading to the GigE does not require any 

changes to the application and takes only a few minutes. 

IDS IMAGING DEVELOPMENT SYSTEMS 

Tel. +49-7134-961960 • Fax +49-7134-9619699 


Vision & Imaging Issue N°11 • November 2007 9 

Portable Infrared Camera 

with 3.5-inch touch screen 

The ThermaCAM T/B- 

Series portable IR camera 

features 320x240 

pixel resolution, touch 

screen plus stylus, full 

measurement options 

and an innovative design. 

The series comes 

in a T-version for industrial applications and a B-version 

for building and construction applications. It is enhanced 

by ergonomic elements such as a 120° tiltable 

infrared lens unit and easy-to-reach command buttons 

for more user comfort. Imagery is displayed on a 3.5-inch 

touch screen, which opens up new functionalities such 

as sketching directly on the screen and an easy handling 

of the camera software menu. The Thermal Fusion allows 

a seamless transition of imagery from thermal 

into visual and vice versa inside the screen, while retaining 

all measurement functions in both view modes. 

Dust- and water splash proof, shock-resistant, with a battery 

enabling up to four hours of uninterrupted use, the 

model's weight is 880g, making it suitable for go-anywhere 

use in tough on-site and field conditions. 

FLIR SYSTEMS 

Tel. +32-3-2878710 • Fax +32-3-2878729 


CAN Display 

flexible mounting options 

The RM Display Color 2501 

is flexible due to different 

mounting positions and 

readable in direct sunlight 

due to its transflective 

screen. The device features 

a 6.5'' display with a resolution 

of 400x240 pixels in a 

16:9 format. The TFT technology 

permits readability 

in daylight and even in direct 

sunshine. Four keys and 

a pressure-sensitive incremental 

potentiometer facilitate 

quick toggling of CAN 

data and controlling tasks. Due to its backlit display and 

keys, the display can be used in darkness. A large input 

power supply from 9V - 60V allows for deployment in 

the most diverse mobile and stationary applications. Furthermore, 

up to four cameras can be connected to the 

display for direct viewing and monitoring tasks. The 

firmware of the CAN display automatically recognizes 

PAL and NTSC video sources. 

RM MICHAELIDES SOFTWARE & ELEKTRONIK 

Tel. +49-661-94900 • Fax +49-661-9490-333 



SILVER & TITANIUM 

■ 320x256 and 640x512 resolution 

■ SW/MW/LW IR Spectral bands 

■ High QE InSb, MCT and QWIP arrays 

■ Fully radiometric with Hypercal 

■ Frame rates up to 400 Hz 

■ Image analysis software included 

Electronics Fast thermography 

Stress analysis 

Infrared Target 

Signature 

Visit us at : 

Workshop Metz, France, 21-23 nov. 07 

NDE, Vadodara, India, 28-30 Nov. 07. 

Thermogram, Châlons en Champagne, France, 13-14 dec. 07 

www.cedip-infrared.com 

(In the USA, www.electrophysics.com/cedip) 

The Top 4 Time Savers of Express Alignment 

1 

No more time consuming rough 

alignment and adjustments of lasers. 

3 4 

Result information compiled and displayed 

instantly, ready for export to USB port. 

Fixturlaser provides Express Alignment and Service in more than 70 countries around the world. 

 

2 

For SLI: 14967 at www.tim-info.com/ien 

Next step guidance with 3D 

Flash ® animated color screens. 

What you see is what you do 

the green arrows show you the way 

to a perfect alignment result.



Torque Limiters | Bellow Couplings | Miniature Couplings | Elastomer Couplings | Line Shafts | Linear Couplings 

SAVE TIME, DO MORE. 

LESS TIME FOR ASSEMBLY – MORE TIME FOR EVERYTHING ELSE. 

THE ULTIMATE COUPLING. 

FROM 0.1 TO 10,000 NM. 

R+W Antriebselemente GmbH | Phone: +49 93 72-98 64-0 | E-Mail: info@rw-kupplungen.de | Internet: www.rwcouplings.com 



CameraLink 

16Mpixel 

The CCD-16000 camera is 

based on a sensor within 

36x24mm format, being 

read-out with 2 images/sec 

and 12bit dynamics. The 

camera features an RS-644 

output. IEEE1394, CameraLink 

and Gigabit Ethernet 

are available. 

VDS VOSSKÜHLER 

Tel. +49-541-800840 

Fax +49-541-8008410 



Colour Sensor 

internal light source 

This module detects the 

colour and intensity of test 

objects and disposes of an 

internal light source. The 

measuring procedure is 

based on measurements 

in comparison to reference 

products by means 

of user-specific parameters. 

Parasitic inductions 

by environmental light are 

compensated automatically. 

PREMOSYS 

Tel. +49-6593-998682 

Fax +49-6593-998684 



CCD Cameras 

mini CameraLink 

The KP-FXXSCL/PCL CCD 

cameras measure 

29x29x29mm, and weigh 

50g. The cameras are typically 

used in image processing 

and machine vision 

applications with limited 

space. They feature 

a Power over CameraLink 

interface. 

HITACHI KOKUSAI 

Tel. +49-6106-69920 

Fax +49-6106-699212 



Infrared Thermometers 

offer continuous temperature monitoring 

The rugged, IP65 

sealed single-piece 

system Raytek XR 

infrared thermometermeasures 

temperatures 

in a range from 

–40 to 1650°C. It 

offers multiple extendedtemperature 

ranges, precision 

temperature 

resolution and a 

versatile electronics 

platform, yet 

utilises identical, configurable installation hardware 

and application software. This approach reduces installation 

time, training and documentation requirements. 

In addition, standard RS485 communications enables remote 

configuration, streamlining troubleshooting and 

data acquisition. Field calibration software allows for 

on-site calibration of sensors, reducing service time 

and expense. 

RAYTEK 

Tel. +49-30-4780080 • Fax +49-30-4710251 


Vision Sensors 

with intuitive user guidance 

The ZFX vision sensor 

offers assistance for 

lighting, filtering and 

automatic setting of 

parameters, which navigate 

users through 

the vision application. 

The built-in touch screen offers interactive menus that 

guide the user through the entire set-up of individual 

tasks in three simple steps: select the inspection tools, 

choose the inspection regions and set the proposed inspection 

parameters with a push of the Auto button. 

ZFX provides immediate live feedback, images and 

clear system messages. The entire set-up procedure is 

completed in a matter of minutes. No PC is required for 

set-up, maintenance and operation. Multiple inspections 

per image can be configured. You can choose from 

up to 20 inspections or inspection support tools. Image 

pre-processing, position compensation, calibration and 

data logging tools complete the range of powerful 

easy to use features. Multiple interface options offer 

smooth integration into the control environment, such 

as Ethernet, serial, USB and digital I/O. 

OMRON 

Tel. +31-73-6481920 • Fax +31-73-6481879 


Data Recognition Software 

frame rate of 150fps 

The Data Matrix 

code reading software 

is combined 

with an intelligent 

camera enables 

identification of 2D 

codes. Depending 

on the camera 

type, it provides a 

maximum frame 

rate of 150fps. Code detection and reading is not affected 

by the code's shape and size, the orientation of 

the code (which can be rotated by 360°) or by the 

background type (dark-on-bright or bright-on-dark). Mirrored 

codes are identified and read, just as special 

code types, such as nailed or dotted codes. The software 

features three operation modes: the Auto Mode requires 

no configuration efforts and enables the detection of 

a wide range of codes. The Teach-In Mode allows users 

to read in one code sample whose parameters are 

stored in a list, and the Parameter Adjustment Mode allows 

for manual adjustment of parameters to improve 

performance. 

VISION COMPONENTS 

Tel. +49-7243-216723 • Fax +49-7243-216711 


The R-Series 

high performance 

sensors 

offer precise 

position meaurement 

for the 

most demandingapplications. 

With 

0.01% F.S. linearity, a repeatability 

better 0.001% F.S. and an outstanding 

resolution (max.1µm) 

they are well known for their accuracy. 

The R-Series is available with 

flexible (RF) sensing element housing, 

in addition to rod (RH) and 

profile (RP) housings and measures 

position as well as velocity. 

Recently MTS has 

developed the 

Temposonics® C- 

Series - the world’s 

smallest magnetostrictive 

position 

sensor. Designed 

for use in highervolume 

OEM 

products with constrained 

space and budgets the electronics 

fit inside a 36 mm x 23 mm 

cylindrical package. When housing is 

www.mtssensor.com 

Temposonics ® M-Series 

Reliability and stability for mobile hydraulics 

The Temposonics® 

M-Series is designed 

for absolute position 

measurement 

in agricultural, 

building, handling 

or other mobile 

machinery. It combines the advantages 

of non-contact, wear-free and 

high-accuracy displacement and 

velocity measurement to meet all 

MTS magnetostrictive 

liquid 

level sensors are 

ideal for both 

tank level gauges 

and processing 

level measurement 

controls. 

Level Plus® gives 

you the ability to 

measure product 

level, interface 

and temperature 

all from one sensor up to 18 m. 

They are not affected by changes 

in dielectric constant, in 

atmospheric or temperature 


Temposonics ® R-Series 

High precision for industrial applications 





Extremely 

c o m p a c t 

construction, 

visualisation via 

diagnosis LEDs 

and easy calibration 

from 

outside without 

opening the 

sensor facilitate the installation. 

The R-Series sensors are available 

with a full line of analog and digital 

serial outputs and offer multiple 

magnets sensing with up to 20 

positions simultaneously. 

The magnetostrictive sensing technology 

is non-contacting and 

maintenance-free. 

demands on the 

harsh environment 

of mobile hydraulic 

applications. With its 

high shock and 

vibration resistance 

and electromagnetic 

immunity the M-Series is the perfect 

solution for use inside compact 

hydraulic cylinders. 

Temposonics ® C-Series 

Compact, flexible design for smallest space 


required the C- 

S e r i e s 

provides a standardized 

IP67 housing, 

a float for level 

measurement or 

customized housings 

that can be 

added to the core 

sensor. The flexible 

shaft allows precise curvilinear measurements 

where less than 270° of 

rotation needs to be monitored. 

Level Plus ® 

Wearless gauges for liquid level measurement 


conditions and 

provide a full 

complement of 

housing packages 

that meet global 

standards for hazardous 

locations 

( F M / C S A / 

ATEX/NEPSI/JIS) 

and sanitary 3A 

standards. The 

o u t p u t 

signals are 4- 

20mA with Multi-drop HART communication 

or EIA-485 

Communication with DDA Protocol 

or MODBUS. 

MultiMessage advertisement Issue N°11 • November 2007 11 

MTS Sensors 

Magnetostrictive Sensors 

Designed for your Needs! 

• Temposonics ® Position Sensors 

• Level Plus ® Liquid Level Sensors 

SPS / IPC / DRIVES 2007 

Hall 7A, Stand 510 



m SENSORS 

The Measurable Difference






Colour E-paper Display 

high resolution and improved brightness 

The BiNem 

Demonstrator 

1000 

has all the 

attributes 

of paper 

but content 

can be displayed 

and 

erased electronically. 

It 

uses a 

RGBW (Red-Green-Blue-White) colour filter. The display 

has improved brightness, while maintaining the same 

colour saturation level. Another important feature is its 

fine subpixel size: 127x127 micrometers for each subpixel 

(Red, Green, Blue, or White), leading to a resolution 

of 100dpi, considered high for bistable colour displays. 

The display also offers 16 up to 1 million colours. 

The active area of the colour display measures 107.2x73.2 

mm, resulting in a 129.8mm diagonal for a 300x400xRGBW 

image. Potential applications for colour e-paper displays 

include among others electronic shelf labels. 

NEMOPTIC 

Tel. +33-1-39305160 • Fax +33-1-39305161 


High-Speed Cameras 

for fast inspection applications 

The OPAL-1000m is the 

first in a series of cameras 

to utilize state-of-theart 

sensors that offer 

greater spatial resolution 

at high speeds. This 

sensor technology provides 

linearity over the 

full dynamic range 

through optimized embedded 

video processing. Other important performance 

parameters include channel matching to below noise 

level, automatic black and shading, and defect-pixel correction. 

The camera optimizes a 1/2" CCD area array sensor 

with 1024x1024, 5.5µm square pixels. It can deliver 

up to 120 full-frame images per second with high signal 

to noise ratio. To enable high frame rate image acquisition 

in combination with standard frame grabbers, 

the cameras have a built-in frame memory that decouples 

the asynchronous image acquisition and image 

readout. The image readout and Camera Link interface 

of these cameras allow for software configuration and 

easy integration. 

ADIMEC ADVANCED IMAGE SYSTEMS 

Tel. +31-40-2353900 • Fax +31-40-2353905 


Laser Scanning Microscope 

with 3D capture button 

With this laser 

scanning microscope, 

the LEXT 

OLS3100, 3D image 

capturing can 

be performed 

with just one click 

of the “3D capture 

button”. 

Time consuming 

tasks, such as setting 

the upper and lower focal limits are completed automatically. 

This means that very high quality 3D images 

can be produced very quickly by both novice and experienced 

users. The new 3D handling technology enables 

step height, line width and the distance between 

two points to be measured in a 3D image. Furthermore, 

users will be presented with a variety of standard 

and novel 3D image presentation patterns including surface 

texture, real colour, wired frame, etc. The microscope 

integrates an apochromatic objective lens specially 

developed for confocal laser scanning microscopes (cLSM) 

with a near-UV (408nm) laser light. 

OLYMPUS 

Tel. +49-40-237730 • Fax +49-40-23773647 


Easy Vision Sensor 

helps tackle production errors 

The 48MS MultiSight from 

Rockwell Automation is a 

fully self-contained, multifunction 

vision sensor, 

which can handle up to 

ten different inspections 

simultaneously and pass 

a simple OK/Not OK signal 

to an external PLC or 

process controller. Incorporating camera, optic, lighting, 

communications and fail/pass controller in one package 

it saves on installation time and hardware cost. The sensor 

features a high-resolution 640x480pixel CCD element 

with optics, and employs three different inspection 

tools – pattern matching, contrast and brightness. Advanced 

models with contour detection and XY position 

control will be available. In combination, these capabilities 

allow the 48MS to perform up to ten different inspections 

simultaneously including logic operations – with 

ten different regions of interests. A Teach and Inspect 

- feature ensures quick start-up time and easy modification 

of inspection parameters in case of product 

changeovers. 

ROCKWELL AUTOMATION 

Tel. +44-1908-838800 • Fax +44-1908-839696 


Multi-Function Display 

for operation, visualisation and control 

The 5.7-inch MFD4 multifunction 

display is designed 

as one unit providing 

the PLC, visualisation 

and operation but 

also the software. This 

combines the programming 

system and the visualisation 

in one, and thus 

allows direct access to PLC 

variables. The display features a full graphics colour STN 

display with 256 colours, resistive touch as well as a host 

of communication and network options. It comes with 

an Ethernet, CANopen/easyNet and RS232 interface. The 

touch-sensitive display (320x240 pixels) allows the implementation 

of intuitive operating concepts. The flat 

and seamless display surface is protected to IP65 and can 

be cleaned easily. The device comes with an integrated 

64MB SRAM, 2MB Flash for data/program memory, 

6MB for the visualisation and a battery-backed real-time 

clock. A complete project, recipe data or the operating 

system can be transferred to the device via a Multi-Media 

memory card if required. 

MOELLER 

Tel. +49-228-6020 • Fax +49-228-6022433 


Industrial Cameras 

with FireWire B interface 

The FireDragon series progressive 

scan CCD cameras 

are available with 

both monochrome and 

colour CCDs. They offer 

resolutions ranging from 

VGA (640x480 pixels at 

90fps) to XGA (1024x768 

pixels at 36fps), to SXGA (1280x960 pixels at 20fps), and 

to UXGA (1600x1200 pixels at 15fps). The model's compact 

and vibration resistant housing (44x29x44mm) is 

supplied with power through its 800Mbps FireWire B interface 

enabling you to create compact image processing 

solutions. With the help of its integrated image 

processing, the cameras can output uncompressed raw 

image files, RGB data (24bit) as well as compressed 

YUV4:2:2 (16bit) or YUV4:1:1 (12bit) data. Cameras 

supporting global shutter can even image fast-moving 

objects free of distortion. This qualifies them for microscopy 

and medical applications as well as for mechanical production 

and logistics including object recognition, parts 

inspection, quality assurance, and optical barcode and 

character recognition. 

TOSHIBA TELI 

Tel. +1-949-7708354 • Fax +1-949-2060210 




it’s time for tomorrow 

Strike 

EtaCrown ® 

The bevel gear. 

The worm has turned. 

Our online shop – the best thing 

that could have happened to you! 

• 3,166 intelligent drive solutions, individually confi gurable 

• Manufactured within 48 hours, reliably and certain 

with 100 % quality control and our Keep-Word-Warranty 

• Attractive and secure online payment terms 

It doesn‘t get any quicker or more fl exible than that. 

www.zeitlauf.com 

Freephone hotline 0800/9123945 (0 ct./min.) 


ZL_Anz_IEN_121x175_RZ.indd 1 24.08.2007 11:56:31 Uhr 

NET WORTH. 

Boost your automation line 

and your bottom line with Brad ® Ethernet products for the factory floor. 

You’ve relied on Brad for DeviceNet, PROFINET and ControlNet. Brad 

for Ethernet is a complete line of industrial Ethernet products from 

cordsets and gateways to a brand new offering of switches. All from 

the recognized leader in automation solutions. 

Your net’s worth more with Ethernet products by Brad. For innovation, 

performance and reliability – from a company that knows your industry 

inside and out – choose Brad. 

For more information Tel.: +33 2.32.26.96.36 

©2007 Woodhead Industries, a division of Molex Inc. 

WHAT’S YOURS? 

woodhead.com/ethernet 


Hall 9, 

booth 9 - 215 


da kapo 

Inspection System 

providing high image quality 

The AXIS-3D is a fully integrated stand 

alone x-ray inspection system for conveyor-belt 

based QC, SPC, NDT and general 

industrial applications. Incorporating 

a number of unique technological features, 

it provides unparalleled imaging capability. 

It can be used for either automatic or 

manual inspection and is available in 

both conventional 2D and 3D (stereoscopic) 

configurations, with a 3D accuracy 

of 100 microns. The standard conveyor 

design allows simple and rapid integration 

with existing production line facilities. 

Standard tunnel sizes are 40 x 60cm 

and 80 x 100cm. 

3DX-RAY 

Tel. +44-1664-503600 

Fax +44-1664-503601 

Enter 19129 at www.tim-info.com/ien 

Vision System 

develops imaging application 

Common Vision Blox 

(CVB) 9.0.2 is the machine 

vision programming 

library with the 

comprehensive and 

powerful hardware 

support. The unique 

hardware abstraction 

of CVB offers comprehensive 

access to 

the most different acquisition technologies 

without losing performance or flexibility. Based 

on GigE Vision grounding, the system offers 

the most complete implementation of GenI- 

Cam worldwide which benefits from this new 

standard's possibilities of setting specific 

camera features. A special grid control provides 

convenient access to all individual 

camera options in its own application without 

any need for complex development 

tasks in any of the supported programming 

languages. 

STEMMER IMAGING 

Tel. +49-89-809020 

Fax +49-89-80902116 


User Interface 

with 3.5” VGA screen 

The Anders UMR-X10 is a intelligent user interface 

created expressly for the hassle-free 

integration of modern, intuitive GUIs into 

speciality products. Measuring from 

87x76x15mm, it includes a 3.5” transflective 

screen, running at a full VGA resolution 

with built-in touchscreen functionality, premounted 

onto and integrated with a fullyfunctional, 

custom-designed Windows CE5 

embedded computer. The UMR-X10 offers 

modern computing performance coupled with 

a full range of interfaces, including USB, 

Ethernet and WLAN. 

ANDERS ELECTRONICS 

Tel. +44-20-73808167 

Fax +44-20-78741914 


Industrial Cameras 

with USB interface 

The PicSight cameras have been developed 

to cater for the lower- to middle-performance 

demands of the industrial image-processing 

market. The camera's 

USB2.0 interface makes installation of 

the camera system very easy. The required 

power of max 250mA and 5V is supplied 

via the USB cable, a standard USB 

cable with a mini-USB plug can be used. 

For applications in which cables must be 

securely attached, an additional Hirose 

connection for the USB interface is offered. 

LEUTRON VISION 

Tel. +49-7531-59420 

Fax +49-7531-594299 


Industrial Panel PC 

miniature size 

The STP is low cost touch screen Human 

Machine Interface build on Windows CE 

4.2 and 5.0. Fanless, all soldered components 

and IP65 front panel make the panel 

a reliable solution for industrial applications 

including mobile device. ARM920T 

risc core and hardware graphic accelerator 

deliver performance at low power. It features 

64 Mo RAM, 32 Mo flash memory, compact 

flash extension, 2 or 3 USB "host" port 

(USB key full support), 3 RS232 serial ports 

with 2 switchable in RS485, 10/100 LAN, 

audio stereo and 24VDC power supply. The 

panels are available in TFT 5"6, 8" and 12" 

size screen. 

SYSTOLIC 

Tel. +33-4-67871695 

Fax +33-4-67875337 


LCD Display 

colour, brightness and contrast 

The new EYE- 

LCD5600QHD 

display with a 

screen diagonal 

of 56" has 

been especially 

designed for 

ambitious applications 

in 

professional areas. Offering brilliant 

colour, combined with a 3840 x 2160 

pixel resolution it meets the demands 

of modern visual solutions. These characteristics 

are indispensable in control 

rooms, boardrooms and meeting rooms. 

Other features include: high contrast, 2 

x digital DVI inputs or 4 x digital DVI inputs, 

VESA mounting structure and low 

operating costs. Applications include 

professional graphics, healthcare, military, 

training, architecture, radar and 

weather. 

EYEVIS 

Tel. +49-7121-433030 

Fax +49-7121-4330322 

Enter 20189 at www.tim-info.com/ien


Optical Proximity Switches 

for small objects 

The Simatic PXO830 

GL forked light sensor, 

the Simatic 

PXO840 LV70 fiber optic 

sensor and the 

Simatic PXO650 L90L 

laser distance sensor 

offer detection accuracy 

and reliability. The 

spectrum of the new photoelectric sensors ranges from 

the detection of the smallest objects to the detection 

of larger objects from a distance of up to 30m. The proximity 

switches are suitable for activities such as monitoring, 

testing, detection or positioning. The forked light 

sensor recognizes objects of 0.2mm and above. It is available 

in fork widths of 30, 50, 80 and 120mm, which means 

that it can be used variably for different object sizes. The 

fiber optic sensor offers accuracy at short distances. The 

small devices can be snapped onto a standard DIN rail, 

which enables a great deal of space to be saved. The laser 

distance sensor can detect objects at distances of up to 

6m. The use of additional reflectors enables objects to 

be recognized up to a distance of 30m. 

SIEMENS A&D 

Tel. +49-911-9783273 • Fax +49-911-9783321 


Wireless Devices 

for outdoor industrial applications 

The AWK-1200 series includes 

an Access Point/Bridge, and an 

AP Client, both of which have a 

rugged IP67/68 certified weatherproof 

casing to withstand extreme 

environmental conditions. 

The robust features and deployment 

flexibility make the series 

products suited for outdoor industrial 

applications. The detachable 

antenna design gives users the freedom to use 

a variety of special-purpose antennas. Both models 

are guaranteed to work in temperatures ranging from 

-20 to 70°C. Wireless security is enhanced using WEP, 

WPA/WPA2 (Wi-Fi Protected Access), and IEEE802.1X authentication 

to guarantee a safe, wireless network environment. 

The devices can be used for Point-to-Point 

(PTP) and Point-to-Multipoint (PTMP) wireless communication 

to allow multiple locations to share a single Internet 

connection. Outdoor wireless networks that use 

the extend connectivity beyond the building walls and 

wired backbones to deliver cost-effective service, and 

expand information access. 

MOXA TECHNOLOGIES 

Tel. +886-2-89191230 • Fax +886-2-89191231 


Modular Ejectors 

compact and light 

The EBS-PT is available 

in six performance 

levels with either 

a push-in fitting 

or threaded connection, 

offering numerous 

integration options 

for a variety of 

applications. Vacuum 

generator mounting 

can be done either 

directly via side holes in the housing or alternatively by 

mounting it on a clip-on strip. The latter option enables 

simple and fast assembly of various ejector sizes on one 

strip. The smaller EBS-PI ejector measures just 57mm long 

and 10mm in diameter, and is available with two performance 

levels. Compressed air is directed into the ejector 

at one end with the exhaust channelled out via side 

openings; this produces negative pressure creating a vacuum 

at the other end. Since the vacuum is created in 

an axial direction, the ejector can be integrated directly 

in the hose line via the press-fit nozzles at either 

end. 

BOSCH REXROTH 

Tel. +49-9352-180 • Fax +49-9352-1840 


Chain Oil 

remains stable 

Molykote L-1428 is a synthetic 

lubricant formulated 

to resist oxidation and 

thermal degradation while 

maintaining stable performance 

and lubricity 

over a wide temperature 

range and under heavy 

loads. 

DOW CORNING 

Tel. +32-64-888000 

Fax +32-64-888950 



Encoders 

high noise immunity 

The Mercury 3000 and 

2000 programmable encoder 

systems combine 

high noise immunity for 

demanding industrial applications 

with a positional 

resolution of 20nanometres. 

Both units enable engineers 

to optimise motion 

platform performance 

in real time. 

INMOCO 

Tel. +44-1327-307600 

Fax +44-1327-300319 



Terminals 

watertight 

The AE-FastSeal product 

family offers fast and easy 

mounting, by contacting 

and sealing the cable in 

one step to the terminal, 

without the need of additional 

sealing work, -time 

and materials. These terminals 

offer reliable contact 

under rough condition. 

AE INDUSTRIES 

Tel. +31-76-5810550 

Fax +31-76-5810553 



STAY A STEP 

AHEAD OF YOUR 

PROCESSES. 

An HMI from Beijer Electronics shortens the path 

to effective automation. Dual-driver support allows 

simultaneous connection to two controllers, with 

devices of differing brands exchanging data via the 

panel. 

Programming is simpler too, thanks to recipe 

directories, reusable parameters and the ability 

to store repetitive commands as macros. Data and 

projects can be updated on-site, or they can be 

handled on a PC and updated quickly via network, 

modem or Compact Flash. 

It’s innovation that puts you in focus – and keeps 

you on the move. 

www.beijerelectronics.com 

FROM PERSON TO PROCESS. 


Issue N°11 • November 2007 15



Boker’s 2008 Washer Catalog 

BOKER’S, INC. 

Tel. (888) 927-4377, Fax (800) 321-3462 

sales@bokers.com, www.bokers.com/iene 

Boker’s, Inc.’s FREE 2008 Washer Catalog has over 22,000 nonstandard 

sizes available with no tooling charges. Outside diameters 

of 0.080" to 5.140", a wide range of IDs and thicknesses, 

and 2,000 material variations provide millions of possibilities. Materials 

include low-carbon sheet steel, five types of spring steel, 

stainless steel, aluminum, brass, copper, nickel silver and non-metallics. 

ISO 9001:2000 Registered. 


Stockcap is a leading global manufacturer providing 

solutions to your product protection needs. Choose from a wide 

variety of standard caps, plugs and custom shapes, all of which are 

available in materials and lengths to suit your application. Many sizes 

are held in stock, but we also specialise in medium to high 

production quantities. Or utilise our technical expertise and 50 

years of experience to create your ideal product. We specialise in 

dip moulding, but also manufacture using compression, injection 

and extrusion processes. 

STOCKCAP 

Tel: +44 1622 693200, Fax: +44 1622 693201 

www.stockcap.co.uk 




Plastics for longer life – Increase machine life 

with polymers 

Eliminate lubrication and minimize maintenance. Thereby reduce 

cost and also by attractive prices and quick deliveries. This is 

the core idea and these are the goals for all igus® products, 

systems, and services. igus® plastics and their tested features 

in life-cycles, friction, and strength are always the core of igus® 

products. This catalog presents over 55.000 products. 

Available in English, Spanish, French, Polish, Magyar. 

IGUS ® GMBH 

Tel. +49-22 03 / 96 49-800, Fax +49-22 03 / 96 49-222 

info@igus.de, www.igus.de 

New Catalog Dispensers and Metering Pumps 

New Catalog of precision Dispensers and Metering Pumps for 

Laboratory, Industrial, Process and OEM applications. New 

products include the V300 Variable Speed Control, the VMP Versatile 

Programmable Dispensing System and the Smooth-flo 

Precision Low Flow Pulseless Delivery System. FMI products features 

unique piston-type positive displacement units with No 

Valves, Low-Dead Volume, 1% accuracy, a ceramic/fluorocarbon 

fluid path, and a range from 500 Nanoliters per dispense 

up to 4,600 ml/min continuous metering. 

FLUID METERING, INC. 

www.fmipump.com 

Control Module 

with internal PLC 

The KurtUSB 

MLX modular 

building block 

processes input 

from various 

electrical signals 

with high speed 

and accuracy 

and can provide 

programmable 

responses for automatic 

operation. The MLX can easily be 

configured to work with several different 

types of devices including LVDT 

probes, air to electric transducers, temperature 

sensors and eddy current sensors. 

With an internal PLC, the MLX can be programmed 

with industry standard ladder 

logic to inputs and can control complex 

automated equipment through discrete 

outputs, stepper motors, analog outputs, 

or remote DeviceNet devices. 

KURT MANUFACTURING COMPANY 

Tel. +1-763-5724593 

Fax +1-763-5748368 


Particle Counter 

ATEX-approved 

The ACM20 Z2 is compact and portable, allowing 

quick, accurate and safe detection 

of contaminants to be carried out at refineries, 

pipeline distribution terminals, storage 

depots and airports. Designed to replace 

traditional and often time consuming qualitative 

test methods, the device offers online 

quantitative tests. In particular, it can 

be used to detect moisture and particulate 

contaminants down to 4microns in size, that 

enter the fuel distribution chain during 

installation, maintenance or repair, or 

through damaged or worn parts. 

PARKER HANNIFIN 

Tel. +44-1442-458000 

Fax +44-1442-458111 


360° Angle Sensor 

accurate and compact 

PRAS2 is a dependable, contact-free and 

wear-free angular position sensor that uses 

an external permanent magnet to measure 

angles from 0° to 360° with a typical resolution 

of 0.1°. Available with analogue 

outputs: 4-20mA, 0.5-4.5V and 0.5-10V, the 

measurement circuitry is shielded from external 

environment conditions and is shockand 

vibration-resistant. Available in 20mm 

flat, 36 mm diameter servo flange IP68 

stainless steel housing, it can be quickly installed 

in limited space. 

ASM 

Tel. +49-8123-9860 

Fax +49-8123-986500 


Padlock 

multi-clasp 

This multi-clasp padlock 

for lockout/tag-outprocedures 

features a 

standard fixedwidth 

hasp shape 

and sports a highlyvisible, 

safety-colour 

coded, polyester 

powder coated finish. 

The lock has 

room for six individual 

padlocks to 

be attached, allowing 

multiple workers 

to lock off the same machine. The lock 

will not open until each separate padlock has 

been removed. This ensures that the lockedoff 

equipment cannot be reactivated until 

everyone has completed their work, and safe 

operation can continue. 

CASTELL SAFETY 

Tel. +44-20-82001200 

Fax +44-20-89059378 


Pressure Regulator 

up to 1,400l/min 

Both the LED and LCD display versions of 

the VPPM proportional pressure regulator 

feature an 1/8” proportional pressure 

valve, offer a choice of G1/8 or PRS 

manifold connection, and are available 

with a pressure range of 0-2, 0-6 or 0-10bar. 

The latter model accommodates a flow 

rate of up to 1,400l/min. By employing a 

cascaded dual-stage regulator design, 

each with its own pressure sensor, the 

VPPM provides a high level of control, with 

coarse and fine adjustment facilities. 

FESTO 

Tel. +49-711-3474032 

Fax +49-711-3472138 


Digital Controller 

programming control 

The RE23 type digital controller is destined 

to control temperature in furnaces, dryers, 

injection moulding machines and others. It 

features universal input (thermocouples, 

resistance thermometer, analogue standard 

signals). Control according the program: 

maximally 9 segments with or without repetitions. 

The segment time ranges from 0 to 

999 min. Program starts from the currently 

measured value or from the set point, after 

finishing the program, continuation the 

control of the last set point or output switching 

off. It offers relay or binary 0/6V output. 

Setting of PID parameters is manual or by 

means of the auto adaptation. 

LUMEL 

Tel. +48-68-3295100 

Fax +48-68-3295101 

Enter 20717 at www.tim-info.com/ien

Drives and motors 

ACOPOSmulti from B&R: Modular cooling system, 

simple wiring, trend-setting power supply with pow- 

 

scalable inverters, high availability, integrated safety 

technology. 

Innovative PC technology 

Perfection in Automation 

www.br-automation.com 

Automation PC from B&R: Intel ® Pentium ® M, Core 

Duo and Core2 Duo processors, scalable, fan-free, 

dual independent display operation, 1 Gbit Ethernet, 

integrated UPS, CompactFlash, hard disk, DVD. 

Automation Panel from B&R: visualization and operation, 

display diagonals from 10.4" to 21", modular 

add-ons, illuminated ring keys, operation up to 160 m. 



 

X20 and X67 System from B& 

troller - with IP20 or IP67 protection, powerful CPUs, 

expandable bus controllers, removable terminal 

blocks, unequaled component density, hot-pluggable 

electronics, seamless integration of IP67 I/O, 

 

 



Ethernet POWERLINK 

Ethernet POWERLINK: 100% deterministic, precision 

 

er-level controller, uniformity with standard Ethernet 

protocols (TCP, UDP, IP), implementation of standard 

Ethernet hardware, implemented in over 210,000 

nodes worldwide at 200 machine manufacturers. 



Integrated safety technology 

Integrated Safety Technology from B&R: open standard, 

fastest real-time capable safety bus system on 

the market, SIL 3 at bus cycle times of 200 µs, smartsafe 

reactions, no extra wiring, remote safety technology, 

fully integrated in existing topologies, scalable 

solution for simple or complex machines. 






Integrated Continuous software architecture is for 

the your fast machine lane to software. your 

automation Automation solutions! Studio 

Automation Studio by B&R: programming, real-time operating system, visualization, motion, safety, diagnostics and project organization. 

Automation Studio from B& 

 

 



For SLI: enter 20710 at www.tim-info.com/ien For SLI: enter 20711 at www.tim-info.com/ien For SLI: enter 20712 at www.tim-info.com/ien 



Perfection in Automation


Micro 

Linear 

NEW 

Brushless micro motor 

■ Smallest dimensions with 

only Ø 3 mm 

■ No cogging 

■ For combination with 

planetary gearhead, output 

torque up to 0.88 mNm 

■ Available with spindle and 

gearhead as linear actuator 

and other custom executions 

Based on ironless, self supporting 

skew-wound copper coil 

Please visit our German Exhibition: 

SPS/IPC/DRIVES, Nuernberg 

27.– 29.11.07 · Hall 4, Booth 520 

DR. FRITZ FAULHABER 

GMBH & CO. KG 

Tel. +49 7031 638-0 

www.faulhaber-group.com/smoovy 


Motors & Drives 

Drives move mining town 

in Sweden 

At LKAB’s concentrating and pelletizing plants in Kiruna, 

drives control pumps, fans, conveyors and feeders 

Courtesy of LKAB 

Kiruna, a tiny mining town 200 km north of the 

Arctic Circle in the northern Sweden is 

today known also as a town that is sinking. Therefore, 

Kiruna is in the process of being moved to 

another location because of the cracks that have 

been developed in the mine wall under the town 

during its 100-year long history in mining. To 

save the town and to provide an international hightech 

minerals group LKAB, with access to the 

iron ore lying under Kiruna, the town officials have 

made extensive plans for relocating the town 

centre. LKAB, in turn, has started a major investment 

program of 1.1 billion EUR to increase 

production capacity for iron ore products in the 

region from the current to 30 Mt by 2008. 

Reliability and fast service are the keys 

High production goals cannot be reached without 

reliable and smoothly operating processes. When 

LKAB was selecting a drives supplier for their 

new concentrating and pelletizing plants in Kiruna, 

a vital part of their major investment 

program, they knew whom to turn to. During a 

period of several years, Vacon has supplied roughly 

100 AC drives to control pumps and fans at LKAB’s 

concentration plant (KA2) in Kiruna, and the 

ventilation system in the tunnels of the mining caves 

in Malmberget, 75km from Kiruna. In 

Malmberget, some of the Vacon AC drives are 

located almost 1,000m under ground. This depth 

poses many risk factors to electrical equipment. 

Consequently, for the essential task of pump, 

fan, conveyor and feeder control at LKAB’s new 

concentrating plant (KA3) and pelletizing plant 

(KK4) under construction in Kiruna, LKAB has 

chosen Vacon AC drives. About 200 air- and liquid-cooled 

NXP drives of 690 V will be controlled 

via Profi bus. CANbus will be used for communication 

with the maintenance system. Commissioning 

of the plants will take place this winter, 

and the plants are expected to be operational 

in April 2008. In mining processes where a downtime 

can raise to hundreds of thousands of Euros 

per day, the reliability of the equipment is of 

utmost importance. The other fundamental issue 

is fast service. With Vacon’s subsidiary located 

in Sweden, support and service are available 

at short notice when needed. 

Liquid cooling for demanding environments 

Liquid cooling enables the use of cabinets with a 

high protection class – this is why the liquid-cooled 

AC drives are ideal for the underground excavation 

industry, where dust and humidity are major risk 

factors. These drives are well suited for locations 

where air cooling would be difficult, expensive 

or impractical, or where the installation space is at 

a premium. The liquid-cooled units, which use 

normal drinking water as coolant, have a very 

compact construction and a low noise level as no 

large fans, additional air conditioning or filtered 

ventilation systems are needed. A low noise level 

also means a better working environment. An 

additional factor that contributed to the choice was 

their heat loss transportation. Inconcentrating 

and pelletizing plants, the air is filled with coal and 

iron ore dust. The liquid-cooled drives make it 

possible to transport the heat losses outside the 

electrical room without ventilating the room and 

cabinets with the surrounding air. 

A town driven to a new location 

With an ore body of about 4 km long and an 

estimated depth of more than 2 km, LKAB Kiruna 

mine is the world’s largest, most modern underground 

iron ore mine. To date, more than one 

billion tonnes have been mined, and the present 

main level is at a depth of 1,045m. Mining towns 

elsewhere in the world have struggled with the 

problem of sinking earth, but in most cases, the 

approach has been to prop up sinking buildings 

rather than move them. This massive and expensive 

move operation of Kiruna, a city of 23,000 

people, will take a few tens of years, maybe even 

more than one hundred years. 

VACON 

Tel. +358-20-12121 • Fax +358-20-1212205 


Brushless Motor 

optional IP67 version 

With two options of voltage range 

(7.5-59 or 12-95VDC), the IntB range 

is capable of producing continuous 

power outputs of 0.5kW with a peak 

value of 1kW. In addition, it also offers 

a wide range of feedback and positioning 

options, allowing IntB motors 

to be easily integrated into various 

systems. As all the electronics are 

integrated into the motor, the IntB 

range of motors have far less wiring, 

reduced conduits and panel space. 

MOTION CONTROL PRODUCTS 

Tel. +44-1202-599922 

Fax +44-1202-599955 



750W Motor 

with IP65 protection 

The large MAC800 motor (750W) is 

suited for applications in more demanding 

environments. The IP65 

protection of the motor has been 

achieved by replacing the ventilator 

built into the cooling fins with 

large fins. In addition, a water-tight 

seal of the axle bearing has been 

achieved using an IP67 Rulon Teflon 

bush. This has a low friction and requires 

no lubrication. The flange 

and shaft are made of stainless steel. 

JVL INDUSTRI ELEKTRONIK 

Tel. +45-45-824440 

Fax +45-45-8225550 



Speed Control 

integrated velocity control 

The MdrivePlus product line increases 

functionality with the integration of 

a digital oscillator for accurate speed control 

in the MDrive34Plus2 Speed Control. 

This all-in-one solution utilises a NE- 

MA size 34 high-torque brushless 1.8° 

motor, with NEMA size 17 and 23 motors 

also available. The MDrive34Plus2 

accepts a broad input voltage range from 

12 to 75VDC. Oversized input capacitors 

are used to minimize power line surges. 

The product offers an operating range 

of -40 to 75°C. 

INTELLIGENT MOTION SYSTEMS 

Tel. +1-860-2956102 

Fax +1-860-2956107 



Electric Motors 

0.09 to 200kW 

New 


Motors & Drives Issue N°11 • November 2007 19 

The 4KTCD series of electric 

motors is suitable for use in 

potentially explosive dust 

atmospheres in zones 21 and 

22. Features include an axis 

height of 71 to 315mm and 

0.09 to 200kW power. The 

standard explosion protection 

for the electric motors is II 2D 

IP65 135ºC. The increased 

mechanical protection of class IP65 prevents the potentially explosive 

dust atmosphere from permeating into the electric motor 

and igniting. The motors are ATEX certified. 

BARTEC 

Tel. +49-7931-597198 • Fax +49-7931-597498 


Drive System 

Highly effi cient compact drives – 

outstanding performance / volume ratio 

Brushless DC-Servomotors 

The modern design optimally complements 

the FAULHABER product range. 

The new line of sensorless, electronic 

commutated DC-Servomotors is 

impressive: 

Ø 15 & 22 mm, lengths 24 ... 48 mm 

The characteristics of these motors in 

modular design are remarkable: 

Excellent dynamics: 

- FAULHABER system coil 

- Neodymium magnet rotor 

Sensorless, electronic 

commutation 

Very reliable - long life 

The new servo amplifi er - an ideal 

drive for speed control, making 

these motors true power packs! 

Miniature Motors 

flat brushless DC 

With a footprint of 32 x 

11.7mm, nuvoDisc is well-suited 

for space-constrained applications 

such as portable respirators 

and barcode scanners. 

A high-speed slotless design 

significantly reduces vibration 

and eliminates cogging to provide 

smoother operation and better accuracy for maintaining a 

stable speed compared with conventional miniature flat motors. 

Offering speeds of up to 50,000rpm and mechanical power output 

of up to 30W, nuvoDisc also reduces power supply requirements 

by drawing less current. This minimises generated heat. 

DANAHER MOTION - PORTESCAP 

Tel. +41-32-9256111 • Fax +41-32-9256596 


ø 15 mm 

L 24, 36 mm 

BLD 4803-SL2P 

ø 22 mm 

L 32, 48 mm 

MINIMOTOR SA 

6980 Croglio, Switzerland 

Tel.: +41 (0)91 611 31 00 

Fax: +41 (0)91 611 31 10 

Email: info@minimotor.ch 

www.minimotor.ch


TECHNOLOGY IS ALWAYS MOVING 

We move innovation 


Our Commitment is to offer our 

customers the best range of 

products with the highest quality 

of service to all sectors of 

automation and industry 

By not only meeting our 

customers technical demands 

and requirements but also 

exceeding them we will increase 

the level of technology we can 

offer to all customers 

www.deltaline-europe.com - info@deltaline-europe.com 

Our represented brands 

SpeedyLINE @ 

A Delta Line Company 

SHOP ON-LINE - DELIVERY 24/24H 


Motors & Drives 

V-Belt 

low maintenance 

Optibelt KBX-Power Kraftbands 

are manufactured as 

sleeves and with high section 

accuracy by a special 

milling process after vulcanisation. 

Compared with 

its' predecessors, it offers 

improved materials and 

optimised moulded cogs. 

OPTIBELT 

Tel. +49-5271-621 

Fax +49-5271-976200 



Roller Chains 

interchangeable 

Extended Life CHP hard 

chrome plated pins offer a 

hard wear resistant pin 

surface, resisting wear 

longer than standard heat 

treated pins, also in dry, 

abrasive environments. Extended 

Life CHP chain is interchangeable 

with standard 

ANSI chain, offering 

wear and fatigue life performance 

in extreme temperature 

ranges. 

DRIVES 

Tel. +1-815-5895438 

Fax +1-815-5894420 



Controllers 

for motors 

Additions to the ArmorStart 

product line will allow users 

in food and beverage applications 

to benefit from 

lower installation costs, reduced 

engineering times 

and easy maintenance. In 

addition, voltage ratings 

have been expanded to include 

575V versions for all 

products, including the Bulletin 

284 with built-in PowerFlex 

40 drive. 

ROCKWELL AUTOMATION 

Tel. +44-1908-838800 

Fax +44-1908-839696 



Compact Speed Controller 

for brushless DC motors without sensors 

The DECS 50/5 

(Digital EC Controller 

Sensorless) 

is a new controller 

for driving brushless 

DC motors 

without Hall sensors. 

The wide input 

voltage range 

of 10 to 50V 

means that the 

device is very flexible and adaptable. In continuous 

operation, an output current of 5A of the power stage 

is permissible, giving it a maximum output performance 

of 250W. The speed value can be set via an integrated 

potentiometer or an analogue set value. The 1-Q amplifier 

can be operated at up to a maximum speed of 

80,000rpm. The free choice of starting sequence allows 

the attached motor to start up easily, even when 

the motor data or load ratios are unfavourable. The unit 

provides control inputs for selecting motor direction, 

enable and braking. An operating status display (LED) 

and speed monitor output complete the control features. 

MAXON MOTOR 

Tel. +41-41-6661500 • Fax +41-41-6661650 


Three-phase Motors 

with permanently attached FCs 

The three-phase gear motors 

come with a motor rating of 

0.37KW, complete with attached 

frequency converter 

(FC) in an aluminium casing 

(protection class IP55). 

There is no need for the 

external cables and fitting 

is that much faster. The electrical 

connections to the motor are located within the 

enclosed metal casing and both the power loss of the 

converter and the voltage load of the motor are reduced. 

Due to the modular structure of the system, only the relevant 

component needs to replaced if the gear unit, motor 

or FC becomes defective. The FC works with a cycle 

frequency of approx. 10kHz (can be switched over to 

16kHz). It is designed for 2-quadrant operation (driving 

in both rotary directions). Braking is possible up to 

the power rating that corresponds to the power loss of 

the motor, with the motor being operated with overexcitation 

during braking operation (with overvoltage), 

i.e. the motor power loss will be greatly increased 

during braking operation. 

RUHRGETRIEBE 

Tel. +49-208-780680 • Fax +49-208-498459 


Robust V-Belt 

for aggressive environments 

The Predator is a robust 

V-belt with high 

load capability, specially 

designed for use on 

problem drives that 

need to perform well in 

harsh environments 

and on demanding applications. 

Using aramid 

tensile cords this V-belt 

has a high shock load 

resistance and virtually 

zero stretch. This means less frequent retensioning and 

increased productivity. A specially treated double fabric 

cover provides abrasion resistance that makes them 

withstand debris, punctures, slippage and shearing 

forces. The outer surface of the double fabric cover is 

manufactured in a bareback (non-rubber impregnated) 

construction. This enables the belt to slip under heavy 

shock and impulse loads without generating excessive 

heat. It features a multiple layer tie band that provides 

good lateral rigidity to prevent belts from turning 

over or from coming off the drive. 

GATES 

Tel. +32-537-62606 • Fax +32-537-62745 


Servo Motion Solution 

motors, amplifiers and controls in one 

The Lexium PAC servo solution 

combines high quality 

servo motors with state 

of the art amplifiers and 

motion controls, simplified 

programming software 

as well as open communications 

and embedded 

Transparent Ready 

web server technology. Suitable for a broad range of machines, 

all standard motion control functions are provided 

with up to 8 synchronised axes at high speed (2ms 

for 4 axes) enabling linear and circular interpolation. Data 

capture for distance and position measurements is 

30us. Other advanced features include cam profiles 

for slave axes and programmable logic switch control. 

Complementing the motion control elements are the 

Lexium 05 and 15 servo drive amplifiers and the low mass, 

high dynamic response BSH or BDH servo motors. Two 

software options are provided: Easy Motion for axes configuration 

and editing; and Motion Pro which also has 

IEC 61131 compliant software, electronic signaturing and 

program code protection. 

SCHNEIDER ELECTRIC 

Tel. +33-141298500 


Explosion-protected Drives 

for more cost-efficient, lighter solutions 

Gas explosion-protected drives featuring “increased 

safety” (Ex e) are generally approved for speed-controlled 

operation with a frequency inverter. These geared motors 

are lighter and cost up to 40% less than drives protected 

by a “flameproof enclosure” (Ex de) design. Ex 

e drives are suitable for use in Zone 1 and 2 and with 

temperature class T3. Customized solutions may include 

drives feasible for mounting in an inclined position, 

and drives for applications with conditions such as 

cooling air temperatures above 40°C, or particularly high 

axial or radial forces. 

GETRIEBEBAU-NORD 

Tel. +49-4532-4010 • Fax +49-4532-401253 


Rotary Actuator 

in a compact unit 

The TPM+ Rotary 

Actuator combines a 

planetary gearhead 

with an AC servo 

motor. The sun 

wheel and the rotor 

shaft are connected 

without a 

coupling. The unit 

is half the length of 

conventional motor 

gearhead combinations and 20% shorter than alpha's 

previous version. The TPM+ range includes five models 

with ratios from 16-91, maximum output torques from 

40-1, 600Nm, and maximum output speeds from 325- 

431rpm. The helical tooth gearhead is said to operate 

quietly with little vibration and to result in backlash of 

less than 1 arcmin. Maintenance-free permanent magnet 

brakes are connected to the stator. Drive components, 

such as pinions, belt pulleys, and rotary indexing tables, 

can be connected directly to the output flange. The actuator 

has a rounded body design to reduce the buildup 

of dirt. 

ALPHA GEARHEADS 

Tel. +44-870-8440120 • Fax +44-870-8440140 



Roller Bearings 

longer operating life 

By optimising the raceway 

geometry and outer ring 

material on its range of X-life 

yoke and stud type track 

roller bearings, the basic rating 

life has been increased by 

up to 30% and improved 

load carrying capacities by up 

to 50%. In addition, the 

optimised lateral surface 

profile and the improved 

surface quality of the outer 

ring mean there is reduced 

overall stress on the mating 

track. 

SCHAEFFLER 

Tel. +49-9132-820 

Fax +49-9132-822130 



Linear Slides 

ultra-lightweight 

These linear slides make use 

of carbon fibres to achieve 

ultra-smooth motion and 

ultra-light linear slideways. 

Tables are pre-lubricated 

with oil, giving a maximum 

of 30,000km under normal 

operating conditions with 

load ratio C/P at 10, and the 

velocity at 1m/s. Two types of 

cages are available depending 

on mounting orientation. 

PM BEARINGS 

Tel. +31-523-612258 

Fax +31-523-615290 



Actuators 

highly accurate 

With a measuring frequency 

of 1kHz and a resolution 

less than 30nm the SKR linear 

actuators offer a unique 

combination of rigidity, accuracy 

and reliability in compact, 

maintenance-free units 

achieved through the use 

of patented Caged Ball technology. 

It reduces friction, 

heat and noise, significantly 

enhances both positional 

accuracy, to within ±0.02mm, 

and positional repeatability, 

to ±0.003mm. 

THK 

Tel. +49-2102-74250 

Fax +49-2102-7425217 



a 


SIKO-DriveLine actuators: 

Reach your target faster! 

SPS/IPC/DRIVES 

Hall 6, Booth 6-229 

DriveLine actuators will give your application 

the cutting edge over all your competitors. 

Constant improvement in machine efficiency 

and product quality is “child‘s play“ with this 

flexible, modular automation technology. 

Quality pays – Innovations made in Germany. 

Challenge us and see! 


SIKO GmbH, fon +49 7661 394-0, www.siko.de

INTELLIGENT DRIVE SYSTEMS, WORLDWIDE SERVICES 

DRIVE KNOW-HOW ENSURING EFFICIENCY 

➤ 

➤ 

➤ 

Reducers/Motors 

Electronic drive 

components 

Global services 

➤ 

➤ 

SPS/IPC/DRIVES/ 

Electrical Automation 

Nürnberg 27. – 29. Nov. 2007 

NORD: Hall 4, Stand 261 

System configurations 

Automation 

NORD DRIVESYSTEMS proposes integral equipment configurations to drive users 

in all sorts of industries. Comprehensive know-how, varied experience and the 

fact that the majority of system components – gearboxes, motors, frequency 

inverters, servo controllers and peripherals – is readily available from in-plant 

production enable us to provide any drive solution the customer has in mind. 

Whatever configuration is selected, the drive set up will be one of supreme 

technical and economic efficiency. 

CUSTOMERS' BENEFIT is our major objective. As one of the leading drive 

specialists providing high-technology and high-quality products at short notice, 

along with universal project support and reliable service worldwide, we use our 

know-how to help our customers to be successful in their markets. 

PARTNERS IN MOTION 

Getriebebau NORD 

DRIVESYSTEMS 

www.nord.com · Phone +49 4532/401-0 · Box 1262 · D-22934 Bargteheide/Hamburg 


Exchange Engines and Parts 

fast, economical, high quality alternative 

The Xchange engines 

and parts are available 

for fast delivery 

providing a quick and 

economical alternative 

to a full overhaul, 

extensive repair, or 

even a brand new engine 

purchase. Reconditioned 

to the highest 

possible standard, 

damaged or worn items are replaced with original 

components. A product range with power outputs 

from 4kW to 4,000kW is available, featuring compact, 

space-saving engine platforms to minimise any potential 

redesign costs. Their impressive power-to-weight ratio 

and extremely high levels of reliability, combined with 

long maintenance intervals, provide cost-effective operation 

even in the most demanding conditions. Their 

low noise and exhaust emissions, together with their suitability 

for bio-diesel, and their economical fuel consumption, 

enable users to fully optimise operating costs. 

DEUTZ 

Tel. +49-221-8220 • Fax +49-221-3525 


Stepper Motor 

with one-piece captive shaft 

The Captive Linearstep 

series includes 

RoHS compliant, 

linear-type 

stepper motors 

with a one-piece 

captive shaft. The 

anti-rotation cap 

allows the shaft 

to actuate without 

an external 

guide mechanism 

that is required with non-captive type linear stepper motors. 

The Captive Linearstep produces linear motion in 

a rotary size package with outside dimensions of 25 and 

35mm, and a 30 mm stroke. Shaft travel in resolutions 

from 0.01 to 0.05mm per step can yield up to 5kg of force. 

The same drive circuit used for NPM tin-can type steppers 

can drive the Captive Linearstep. The Captive Linearstep 

has ball bearing shaft supports and a welded 

motor case that ensure long life and durability. The 

one-piece shaft could eliminate some misalignment issues 

caused by two-piece shafts. 

NIPPON PULSE MOTOR 

Tel. +81-3-38138841 • Fax +81-3-38132940 


Inverter Drives 

IP65-rated, offers auto-tuning 

The smv range of inverter 

drives offer fast dynamic 

torque response and sophisticated 

auto-tuning in a 

compact package. The smv 

also offers ingress protection 

to IP65 allowing for 

outdoor use, operation in environments 

with atmospheric 

moisture present and protection 

from low pressure water jets. The smv range is 

designed for use in small motor application where dynamic 

speed and torque control are required, such as 

conveyors, food production, packaging lines and HVAC 

systems. At launch, the smv drives are available in the 

power range 0.25kW to 2.2kW for single-phase supplies 

and up to 7.5kW for 3 phase supplies. Standard operating 

modes include standard and enhanced V/Hz operation, 

vector speed control and vector torque control. 

A range of communication options are available in order 

to integrate the smv into a wider machine or plant 

control network, including DeviceNet, RS-485, LECOM, 

CANopen, Ethernet/IP and Profibus. 

LENZE AC TECH 

Tel. +44-870-7872772 • Fax +44-1743-464329 



DC Motor Controllers 

for restricted spaces 

The non-isolated singlequadrant 

variable speed 

DC drives of the 340, 680 

and 1220 series simply clip 

onto a DIN rail. With a 

footprint of 35x105mm, 

they are suitable for installation 

in existing control 

panels as well as in new 

designs where mounting 

space is at a premium. The 

controllers’ slim design 

saves space and allows 

placement adjacent to 

other control panel components. 

Easy access to 

drive adjustments, plug on screw terminals and the 

DIN-rail-mounting package mean that these controllers 

clip into place without the need for further engineering. 

The DC controllers are designed to control permanent-magnet 

or shunt wound DC motors. Power ratings 

range from 0.55 to 1.8kW at 180VDC armature voltage. 

SPRINT ELECTRIC 

Tel. +44-1903-730000 • Fax +44-1903-730893 


Positioning Module 

controls two motion axes 

The ISI222 allows the total control 

of two motion axes in motion 

control applications. Various 

interfaces and the high 

functionality ensure precise 

movements. The acquisition of 

position and speed, as well as interrupt-capable 

handling of 

triggers and zero track information 

provides the application 

programs and SW controller 

modules with the high level 

of convenience and optimum 

positioning results. The module features a number of 

encoder interfaces for position acquisition, analogue 

outputs for the application of manipulated variables, 

as well as digital inputs for the zero initiator or trigger. 

Input frequencies up to 8MHz and the integrated synchronisation 

with the total system (IO-Bus-Sync) allow 

highly dynamic and precise movements. In addition 

to full compatibility with the proven M-SMC, M-CNC and 

M-SHAFT controller modules can utilize the wide range 

of integrated functions of the compact module. 

BACHMANN ELECTRONIC 

Tel. +43-5522-34970 • Fax +43-5522-3497188 




THE INDUSTRIAL 

ENCODER SPECIALIST 

COMPACTIS 30mm 

Incremental or absolute encoder 

Small size - Robust - Easy to integrate 

Resistant to harsh environments - IP 67 

Standard operating temperature -35° to +100°C 

Wide range of power supplies 5/30V 

Push Pull Electronic - SSI, CANopen interfaces 

OPTICAL OR MAGNETIC TECHNOLOGY ADAPTED TO YOUR APPLICATION 

“We focus on your application” 

B.P. 70044 - F 67013 STRASBOURG Cedex 

Tél : 33 (0) 3 88 20 80 80 - Fax : 33 (0) 3 88 20 87 87 

www.bei-ideacod.com - info@bei-ideacod.com 



CAMILLE BAUER AG 

Aargauerstrasse 7 

CH-5610 Wohlen/Switzerland 

Phone +41 56 618 21 11 

Fax +41 56 618 35 35 

info@camillebauer.com 

www.camillebauer.com Rely on us. 

TORQSENSE® 

LOW-COST OEM DIGITAL ROTARY 

TORQUE TRANSDUCERS 

Condition Monitoring 

Motor and machinery control 

Automotive Aerospace 

Viscosity & Consistency Measurement 

Rotary Torque Measurement has been imprecise, expensive 

and difficult to interface with shafts or readouts. Sensor Technology 

has changed all that with their new technology, which 

utilizes the phenomenon of Surface Acoustic Waves (SAW) 

Non-Contact 

High Bandwidth 

High Resolution 

High Accuracy 

High Sensitivity 

High Reliability 

SAWS 

Integral Digital Electronics 

USB, RS232 Outputs 

Voltage & Current Outputs 

These 

Angular Position 

Transmitters are: 

• Programmable 

• Versatile 

• Reliable 

• Robust 



Torque 

Speed 

Power 

See us at 

Stand 6-140 

27-29 November 2007 

For a system that offers a better performance at an even better price, 

ring Sensor Technology. You’ll find they talk sense! 

68 Heyford Park, Upper Heyford 

BICESTER, OX25 5HD, UK 

SENSOR Tel: +44 (0)1869 238400 

Fax: +44 (0)1869 238401 

Email: info@sensors13.co.uk 

TECHNOLOGY 

Web: www.sensors13.co.uk 


Accelerometer 

for harsh conditions 

The 8766A series is a family 

of triaxial accelerometers 

designed for demanding 

industrial environments. 

Based on Kistler's 

PiezoStar shear element 

design, the accelerometers 

feature a wide frequency 

range, low sensitivity to 

temperature changes and high immunity to base strain 

errors. These sensors are half the size and volume of previous 

types, but feature integral hybrid microelectronics. 

The very low sensitivity variation over the wide 

operating temperature range is combined with high measurement 

resolution, over 94dB of dynamic range and 

frequency response from 1 to 5KHz on each axis. The 

Type 8766A series can be specified with a TEDS interface 

and a wide operating temperature range from -54 to 

165°C. Its cube design, with threaded mounting holes 

on three sides, provides flexibility in mounting for 

both calibration and measurement installation. Applications 

include NVH testing and structural analysis in industrial, 

automotive and aerospace applications. 

KISTLER INSTRUMENTE 

Tel. +41-52-2241111 • Fax +41-52-2241414 


Direct Drive Servo Valve 

with permanent magnets 

The combination 

of permanent 

magnets 

and electromagnetic 

coils 

in this DDV result 

in spool 

driving forces 

considerably larger than those that can be obtained by 

solenoid coils alone.In operation, the electromagnetic coils 

act as ‘switches’ that divert the permanent magnetic 

flux paths; effectively acting as an amplifier, but without 

drawing additional current from the drive electronics. The 

result is that the spool position control is ‘stiff’ and well 

able to counter the flow forces that are created on the 

spool when the valve is passing high flow rate at high pressure. 

In contrast, conventional proportional valves where 

high flow and high pressure performance is demanded 

face a conflict between ‘stiffness’ and drive current that 

cannot always be resolved. The product family covers a 

range of rated flows from 1.9 up to 15.1l/min. The dynamic 

performance of the valve is largely insensitive to system 

pressure, which can be up to 350bar. 

MOOG CONTROLS 

Tel. +44-1684-278249 


Discrete I/O Modules 

eliminate intermittent signals 

The BradControl family of I/O 

modules provides a solution 

for connecting industrial controllers 

communicating on industrial 

networks to I/O devices. 

The Classic 60mm wide I/O 

modules for Modbus TCP (UDP) 

come in an 8-port 16 channel 

format with the availability of 

multiple I/O configurations supporting 

both PNP and NPN input devices. The I/O module 

operates as a slave device in the Ethernet control system, 

gathering signals and data from local field devices. 

Each module comes equipped with diagnostic LEDs 

providing status information on network, power, inputs 

and outputs. It features a built-in 2-port switch for 

network connections, and a four digit display for addressing 

and status information. To facilitate input and output 

device wiring modules accept standard threaded M12 

connectors or the Ultra-Lock connection system. The Ultra-Lock 

connection system provides push-to-lock mechanism 

to provide fast, simple and secure connections between 

the I/O module and the I/O devices. 

WOODHEAD CONNECTIVITY 

Tel. +49-7252-94960 • Fax +49-7252-9496199 


Roller Screws 

withstand heavier loads 

The SR and SV 

roller screws are 

able to withstand 

far heavier loads 

than traditional 

ball screws, while 

maintaining high 

levels of precision 

and stability at all 

times. This is achieved by transferring the load from the 

nut to the screw shaft through threaded or grooved rollers, 

which provide stronger contact points than ball bearings, 

providing reliability and long low maintenance service 

life for machinery. The range consists of the SR 

planetary roller screw and the SV re-circulating model. 

The SR is a robust steel device, featuring threaded 

non-recirculating rollers and a long lead symmetrical nut 

allowing a shock-resistant high-load carrying capacity 

of up to 12,000kN. Likewise, the re-circulating SV roller 

screw offers high positional accuracy and fine resolution 

capabilities, with precision and reliability achieved 

through its compact 1mm leads, which minimise drive 

torque and improve resolution. 

SKF 

Tel. +44-1582-496364 • Fax +44-1582-504203 


Scalable PCs 

in compact size 

With compact dimensions 

of 

300x219x90mm, 

B6, B2 and B1 of 

the BookSize PC 

family, are suitable 

for use in industrialenvironments. 

The IPCs in book format are used in thin-client 

applications, e.g. in POS/POI stations (operator terminals) 

or in data networks. In contrast to desktop PCs, they 

offer maximum reliability and operational security coupled 

with guaranteed long-term availability. The PCs are 

based on Mini-ITX boards differ in processor power 

and the available interfaces. The palette ranges from 

the Intel Core 2 Duo for high-end applications, includes 

the Intel Pentium/Celeron, down to the VIA-C7 

processor as low-cost variant. For the connection of peripheral 

devices, a range of interfaces specific for each 

module is supported: USB 2.0, LAN, VGA, audio, keyboard/mouse, 

PS/2, and serial and parallel interfaces. For 

the correct temperature in the computer, a regulated 

housing fan and an additional CPU fan is provided. 

DSM COMPUTER 

Tel. +49-89-15798250 • Fax +49-89-15-798250 


Directional Sounder 

improves building evacuation speed 

The ExitPoint instinctively 

attracts people towards 

its source in both good 

and poor visibility. The 

units generate sound pulses 

of low, medium and 

high broadband noise that 

make it possible for people 

to identify accurately 

the location of the source. 

Directional sound is recognised 

by a primitive part of the human brain and people 

are instinctively drawn to the noise. They can therefore 

be aurally directed to the nearest emergency exit, 

reducing evacuation times by up to 75% in tests. The 

device operates at 24VDC, has five user-selectable power 

settings so that it can be optimised to its installed environment. 

It is also available with an optional voice messaging 

capability that will reinforce the meaning of the 

tones to people, advising them that following the 

tones they are being led to the nearest emergency exit, 

further improving the effectiveness of the units in reducing 

evacuation times. 

KAC 

Tel. +44-1527-406655 • Fax +44-1527-406677 



Power Monitoring Device 

reduces operating costs 

The Sentron PAC3200 precisely acquires 

the current, voltage and energy 

values of loads in industrial 

buildings. The device thus creates 

transparency for operators 

to reduce energy costs and operating 

costs. It is suitable for use 

direct in 690-volt industrial systems 

and it can take single-phase, twophase 

or three-phase measurements. Higher voltages 

can also be measured using voltage transducers. Thanks 

to the high level of measuring accuracy in accordance 

with IEC62053-22, the device can also be used as a meter 

for company-internal billing. The active and reactive 

energy counter provides further information and the 

working hours counter serves as a runtime control for 

the connected loads. Integral digital inputs and one output 

can be used for control and signalling tasks or for 

energy metering (S0). Users can parameterise the device 

direct onsite or remotely via the communications interface. 

In a higher-level power management system, the 

measured data can be assigned and analysed down 

to the level of individual loads. 

SIEMENS A&D 

Tel. +49-911-9783273 • Fax +49-911-9783321 


Entry Reader System 

for handsfree identification up to 4m 

The Transit entry 

reader combines 

the convenience 

of traditional 

door automation 

with the security 

of restricted access. 

The handsfree 

access system 

is made up 

of a reader and a 

tag. The readers 

are installed next to a door or gate. A long range tag 

visible in line of sight of the reader will be identified and 

depending on authorization the access is granted. The 

system reads at distances up to 4m reliable and consistently. 

It is suitable for situations where people cannot 

use their hands to present their ID badge to open the 

door, but where high security needs to be maintained. 

The system can be installed next to a door without 

the need for any additional mounting accessories or wiring. 

The reader is foreseeing of Wiegand communication for 

seamless integration in existing access control systems. 

NEDAP AVI 

Tel. +31-544-471666 • Fax +31-544-464255 


Industrial Controller 

based on an open, embedded PC platform 

The RTU32 offers 

the features 

of an industrial 

PC, 

combined 

with the robust,industrialperformancenormally 

associated 

with a standard PLC. The device is compact with builtin 

power supply, UPS facility, digital and analogue I/O. 

The open 32-bit WinCE platform offers fast, real-time 

control and gives you the flexibility required to implement 

solutions involving the individual control and 

monitoring of applications within the process and automation 

market. It is also an advanced network communicator 

with RS232/485, Ethernet and USB ports, 

which can handle standard as well as application specific 

protocols like Modbus, IEC60870 and SNMP. Programming 

of the controller is done using a standard 

EN/IEC61131-3 PLC type of programming language, 

applying simple configuration tools. 

BRODERSEN CONTROLS 

Tel. +45-46-740000 • Fax +45-46-757336 


 

 


… www.westermo.com … info@westermo.se 

Industrial Data 

Communications 

Westermo produces a full range of data communication and 

Ethernet equipment designed to provide solutions within the 

most demanding environments typically found in railway, aeronautical, 

military, water, substation, road and tunnel applications. 

The people at Westermo strive to provide the highest levels 

of service and technical support to assist our customers in the 

selection, confi guration and installation of the best solution for 

each specifi c application. Our knowledge goes far beyond our 

own product range, we have a unique competence about your 

environment whether it is on a train, in an aircraft, on the seabed 

or in a substation. 

To ensure a close relationship with our customers, Westermo 

has a local presence in more than 30 Countries. 

Westermo has three main product lines, Remote Access, 

Local Access and Industrial Ethernet which include more than 

a thousand different models and versions of our modems, 

switches, routers, time servers and converters as well as the 

world’s fastest recovery time redundant Ethernet ring. 

… tel. +46 16 42 80 00 


 

 

 

 

 

 

 


Westermo_20070918_163x152.indd 1 2007-09-14 15:07:24


Rotary and Linear Motion Sensors 

www.rls.si 

NEW! 

See us at 

SPS/IPC/DRIVES 

Hall 6, Stand 113 




WLAN System 

IP67 protection 

The BAT54-F system 

WLAN system meets 

the requirements of 

protection class IP67 

and is offered additionally 

in a version 

for hazardous environment 

zone 2. The 

devices support all 

common operating 

modes such as bridge, point-to-multipoint or infrastructure. 

Further characteristics include extensive management, 

security and quality-of-service functions. 

Thanks to the robust design of the WLAN system, radio 

networks can also be set up under extreme ambient conditions 

such as those which prevail in railway traffic or 

the petrochemical industry. The devices which have 

two radio modules with two antenna connections each 

and which can be mounted on the wall or on a mast are 

designed for a temperature range of -20 to 60°C. M12 

connections and a redundant power supply (two 24V 

and one 48V connection) help to ensure a high operational 

reliability. 

HIRSCHMANN AUTOMATION AND CONTROL 

Tel. +49-7127-140 • Fax +49-7127-141214 


Reeling Energy Cables 

in polyurethane sheath 

The Buflex X'Prem is designed 

to boost the performance 

and durability 

of cranes operating at 

high speeds of up to 

150m/min in general industrial 

applications. Its 

design improves the cable 

in terms of traction 

and durability, without 

needing to increase its 

size. The thinner and 

lightweight polyurethane 

sheath enables similar 

performance to standard rubber sheathed reeling cables, 

but within a smaller overall diameter and enhanced 

abrasion resistance. The cable is available in both 

a low-voltage, yellow version, for applications up to 1kV 

and a medium-voltage, red or black, version for applications 

from 6kV to 20 kV. The copper twisted pair cables 

or optical fibres can be integrated within the cable 

to combine advanced control solutions with the crane 

power supply. 

NEXANS 

Tel. +33-1-56698400 • Fax +33-1-56698484 


Code Reader 

reads through paint 

This hand-held reader, 

Locus, is able to decode 

Data Matrix and 

human readable 

marks concealed by 

paint or other industrial 

coatings including 

oil and grease, to a 

depth in excess of 

1mm. The device uses 

ultra sound technology to automatically adapt its reading 

capabilities to compensate for the varying thickness 

of the covering layer of paint, dirt or other forms of contamination. 

Unlike conventional ultrasound technology, 

it does not require a fluid coupling medium and operates 

using only dry coupling with the surface containing 

the hidden code. The reader’s interface also provides 

options for configurable parameters that can be fine tuned 

for ensuring image optimisation, including the ability 

to read codes marked around the circumference of a component. 

The hand- held unit is powered by Li-ion batteries 

which can be charged via USB or external cable. 

PRYOR MARKING TECHNOLOGY 

Tel. +44-114-2766044 • Fax +44-114-2766890 


HVAC Thermostats 

ensure best fit and value 

A new ST range of competitively 

priced plant thermostats, 

designed to cover a 

wide variety of typical HVAC 

applications ensure “best 

fit”, ease of specification and 

best value for its customers. 

The range features immersion, 

duct, wall-mounted, 

capillary and remote bulb thermostats with a choice of concealed 

or exposed adjustment options. All thermostats are 

robustly constructed to ensure optimum reliability and ease 

of installation. The thermostats liquid filled sensing elements 

give the rapid response and accurate switching differentials 

needed for efficient control of modern building services 

plant. Versions are available with single and multistage 

switching as well as adjustable differential and 

manual reset versions for limit control. The IP65 casing means 

the thermostats may be used outside or in dusty, damp, 

polluted, and industrial environments. The generous internal 

space and clearly labeled terminals simplifies installation 

and the generous switch load rating avoids the need 

for contactors and interface relays. 

SONTAY 

Tel. +44-1732-861200 • Fax +44-1732-861226 


Measurement Instruments 

for temperature 

Each TEMPpoint 

temperature measurement 

instrument 

is a stand-alone box 

with 48 separate 24bit 

resolution inputs, 

as well as a 

USB or Ethernet 

port for connecting 

to a PC. Each of the 

48 channels has a dedicated 24-bit A/D converter as well 

as a dedicated CJC circuit to ensure highest accuracy for 

the reference temperature. Signal protection is ensured 

by 1000V channel-to-channel galvanic isolation. 

The units feature an auto-calibration function. The 

automatic linearisation for B, E, J, K, N, R, S and T type 

thermocouples is done in the system and the results are 

sent with 0,1° resolution to the network. TEMPpoint also 

includes constant throughput across all channels at 

rates up to 15Hz per channel, Thermocouple Easy Connect 

for fast setup, 8 opto-isolated digital input lines for 

monitoring and 8 opto-isolated digital output lines 

for driving relays. 

DATA TRANSLATION 

Tel. +49-7142-95310 • Fax +49-7142-953113 


Dual Technology Sensor 

for safety and automation 

The ACTIV8 is combining 

a 24GHz microwave 

radar 

aimed to detect 

the motion as well 

as the direction of 

a mobile and a 

double IR curtain 

dedicated to presence, 

occupancy 

and position sensing. 

The radar detectivity 

is optimal 

up to 4m for targets with a speed range of 5cm/s to 3m/s. 

At the ground level, the motion detection field is up to 

4 x 2m and the IR curtain is covering an area of 35cm 

x 1 or 2m. The device is designed for indoor and outdoor 

use, adapting itself to environmental perturbations 

like sun light, rain, snow, HF lighting, background variations 

as well as vibrations. The sensor is compact 

(262x55x44 mm) and its detection parameters are set by 

means of a remote control. It is complying with EN954- 

1 CAT 2 and EN61508 SIL 2. 

SENSORIO 

Tel. +32-4-3616565 • Fax +32-4-3612858 


Control System 

Hard and software come from one source, 

which guarantees continuity and optimal 

interaction 

Modular system with a vast number of 

standard products 

Short development cycles due to object 

oriented programming 

Low costs of ownership 

Numerous tools for servicing, remote 

maintenance and update 

HMIs 

 

 

resolution 19 “ TFT color displays with touch 

With or without integrated control 

Full integration into the system with the 

software LASAL SCREEN 

Only ONE programming software for all 

HMIs 

Compact design 

Comfortable operation 

Numerous interfaces: 

VARAN, DIAS, CAN, USB, S-DVI, etc. 

Economic 

Reliable 

 

Drive Technology 

Complete motion solutions 

Drives, motors and software from one 

source 

Ideal interaction with control 

 

housing 

Low heat generation 

No unnecessary overhead 

Fast and easy start-up 

No additional software tool needed for 

start-up 

 

complete LASAL MOTION classes 

Error sources during programming are 

avoided 

Software LASAL 

All automation functions in one package: 

LASAL CLASS: Object oriented projecting 

LASAL SCREEN: Visualization 

LASAL MOTION: Drive technology 

LASAL SERVICE: Service and remote maintenance 

Object oriented programming with graphic representation 

Continuous programming environment 

Support of numerous programming languages 

Platform-independent 

Clear organization, quick and easy to learn 

Complete Solutions by SIGMATEK: 

The Whole World of Automation 

Control and I/O Systems Industrial PCs HMIs Software Bus Systems Motion Control 

 

We have the ideal solution for your automation task. 

Hardware and software come from one source: All 

components of our control systems are developed and 

produced at our headquarters in Austria. The all in one 

software package LASAL makes a convincing impression 

SIGMATEK GmbH & Co KG 



VARAN Bus 

Ethernet based and hard real-time capable 

Open standard that can be used by everyone: 

www.varan-bus.net 

Bus cycle time < 100 µs, isochronous access time 2.18 µs, 

jitter < 100ns 

Protocol implemented completely in hardware 

Returned acknowledgement of each instruction within a 

bus cycle 

All data is valid at the end of the cycle 

Easy implementation and programming 

For SLI: 20730 at www.tim-info.com/ien For SLI: 20731 at www.tim-info.com/ien For SLI: 20732 at www.tim-info.com/ien 



with object oriented programming and a handy visualization 

tool. Highly productive machine concepts can be realized 

quickly and easily. The Industrial Ethernet bus system 

 

with a higher level of integration. 

www.sigmatek-automation.com


Newport’s UZS80 Series Vertical 

Linear Stages are recommended for 

high-precision vertical translation in 

applications requiring submicron 

resolution. The low-profile design 

makes them particularly suited for 

space-limited XYZ positioning applications. 

For more information, visit 

www.newport.com/moveme 

or call us! 

Belgium/ Netherlands 

Tel: +31-(0)30 659 21 11 

France 

Tel: +33 (0)1.60.91.68.68 

Germany 

Tel: +49 (0) 61 51 / 708 – 0 

UZS80 Series 

Vertical Linear Stages 

Italy 

Tel: +39-(0)2/92.90.921 

United Kingdom 

Tel: +44 (0)1235 432710 

Key Features 

• 4.5 mm vertical motion in a 

very low profile design 

• High load capacity based on 

opposing wedges motion 

concept 

• 0.2 µm incremental motion 

capability 

• Exceptional low run-out errors 

Reserve your free copy of the 

2008 Newport Resource at: 

www.newport.com/resource08 

MAKE LIGHT | MANAGE LIGHT | MEASURE LIGHT AD-100714-EN 


Cable 

Reels 

You Can’t Buy 

A Better Reel. 

■✓ ✓ Heavy gauge steel spun disks 

■✓ ✓ Heavy gauge welded frames 

■✓ ✓ Heavy duty ribbed construction 

■✓ ✓ Sturdy one-piece hub assembly 

■✓ ✓ Steel drum with fully welded seam 

■✓ ✓ Heavy duty chain drive 

■✓ ✓ High performance swivel joints 

■✓ ✓ Full custom capabilities 

Download or call for your FREE 

Hose and Cable Reels catalogs 

http:/go.hannay.com/G38 

518-797-3791 

Hose 

Reels 


Conveyor System 

allows for flexible solutions 

The Monorail conveyor 

system operates with workpiece 

holders, therefore 

product changeovers can 

be completed easily and 

very quickly by the use of 

special mechanical additions 

on the holder top. 

These work-piece holders can be utilised for almost 

all products or assemblies for a weight of 5kg maximum, 

such as in the automotive, medical technology, smaller 

home appliances, etc. The transport track of the 

work-piece holders can also be set for multidirectional 

moves. Every work-piece holder features an own 

data memory allowing the documentation of all single 

manufacturing steps and the efficient introduction of 

traceability schemes in the production process. The response 

time of the system for the identification of 

work-piece holders at the single indexing stations is 0.8sec. 

The Monorail system includes also the IPTE/Prodel Turbo 

Controller process control system. As an option, 

the decentralised software package Turbo Kit can be 

utilised. 

IPTE 

Tel. +32-89-623000 • Fax +32-89-623010 


Automation Computer 

for extreme applications 

With a Pentium M 1.4GHz processor and up to 1GB DDR 

SDRAM, the UNO-2171 is the most powerful representative 

of the UNO family of industrial computers. The 

unit features a robust aluminium profile housing. 

Thanks to the use of Solid State Disks, it is practically maintenance-free 

and well-suited for extreme applications. 

A 2.5” hard disk can also be integrated into the compact 

housing. A PC/104+ expansion enables the integration 

of field bus cards, and others. An externally accessible 

PC card slot is also available. Standard peripheral 

components can be connected via 2x 10/100Base-T, 

2x RS-232, 2x RS-232/422/485, 1x PS/2 and 2x USB 2.0. A 

512KB battery-buffered memory is available for backing 

up the last system status and data records in the event 

of a power failure. 

MANZ AUTOMATION 

Tel. +49-7121-90000 • Fax +49-7121-900099 


Stop cable failure 

Chainflex ® 

CF130 

750 Chainflex ® cables for Energy Chains ® ex-stock. 

Special stranded cables avoid the corkscrew 

effect. Delivery without charges for cutting and 

non minimum lengths. 

New catalogue with more than 55 000 products. 

Order your copy free of charge. 

igus ® GmbH 

Tel. +49-2203-9649-0 

Fax +49-2203-9649-222 

info@igus.de 

plastics for longer life ® 


Visit us at SPQ/IPC/Drives Hall 5 Booth 206 

CF27 

CF11.D 

CF6 

CFBUS 

Ultra-small Fanless PC 

for less demanding applications 

The EPC-200 is a complete 

PC in a tiny, palmsized 

115x115x35mm 

housing, designed for 

applications where raw 

processing power is not 

required. Typical embedded 

uses would be in 

POS kiosks, protocol converters, machine controllers, display 

managers and similar uses. The unit does not need 

forced cooling and, despite its compact dimensions, it 

is a fully featured PC, able to run the Linux o/s from a 

bootable Compact Flash card or USB memory stick for 

desktop applications if required. It conforms to the 

VESA mounting requirements so that it can be mounted 

directly on the back of a screen or it can be secured 

to any convenient points on an enclosure. The 

200MHz x86 CPU has 128Mbyte of RAM. An internal 2.5" 

HDD is optionally available; the boot options in the BIOS 

support booting from USB, Compact Flash, or HDD. A 

single Ethernet LAN interface and a 1024x768 VGA 

driver are on the motherboard; 1 x RJ-45 LAN port, 2 x 

RS-232 COM ports, 2 x USB 2.0 ports. 

BVM 

Tel. +44-1489-780144 • Fax +44-1489-783589 


Speed Sensors 

10-30VDC voltage rate 

In harsh environments 

where non contact 

speed sensing and 

control are required, 

for example to control 

the slip of AC induction 

motors, the 

measurement resolution 

is usually derived 

from the number of gear teeth of the target. Often, the 

desired resolution is higher than the diameter of the pole 

wheel and the minimum size of the module would allow. 

The DSI family of speed sensors seeks to alleviate 

this problem through providing speed signals with frequency 

16 times higher than the number of teeth of the 

original pole wheel. Internally the sensors use analogue 

Hall Effect elements, measuring the change of magnetic 

field created by the gear rotation. Sinus and cosinus 

signals are generated and then processed in real 

time to produce two streams of rectangular pulses 

with 90° phase shift. The number of pulses resulting from 

each gear tooth varies from 4 to 16, depending on 

the model. 

JAQUET TECHNOLOGY GROUP 

Tel. +41-61-3068822 • Fax +41-61-3068818 


Pushbutton Switch 

for harsh environments 

The PA pushbutton 

switch series offer robust, 

IP67 rated unit 

with standard circular 

bezel new PA 

pushbutton switches 

come with encapsulated 

flying lead 

or rear gold plated 

silver solder lug terminations 

as standard, and a choice of snap-in or 12mm 

diameter threaded mounting with anti-rotation bushing. 

With nine button colours, a further four LED options, 

1.5mm travel, and typically a 3N operating force 

the PA momentary action push-button switch series is 

at home in harsh, all weather environments. The illuminated 

versions afford simple, easy identification, 

whilst the non illuminated range offers optional customized 

button marking. Practical for use with panel 

thickness of 0.8 - 4.00mm PA switches feature a mechanical 

life of one million operations. The switches are 

rated with an operating temperature of -40 to 85°C, and 

a dielectric strength of 1,000VAC rms. 

DAILYWELL ELECTRONICS 

Tel. +886-2-22409060 • Fax +886-2-22409070 



Rodless Thrust Cylinders 

oval piston construction 

The RTC (Rodless 

Thrust Cylinder) pneumatic 

cylinders feature 

oval piston construction, 

which allows 

for high loads 

and torques resulting 

in a space saving design. 

The cylinders in 

the RTC series are 

available is four versions, 

each designed 

specifically for the job at hand be it for applications requiring 

cost-effectiveness, high precision, high performance 

or compact dimensions. While the basic version 

RTC-BV is suitable for universal use, RTC-CG (Compact 

Guide) version packs precision features into compact 

dimensions. RTC-EG (E-Line Guide) represents the 

cost-effective guided version of rodless cylinders, and 

the RTC-HD (Heavy Duty) version is designed for handling 

extremely heavy loads. The cylinders are available 

in a wide selection of diameters, ranging from 16 to 80mm, 

and a maximum stroke length of 9,900mm. 

BOSCH REXROTH 

Tel. +49-9352-180 • Fax +49-9352-1840 


1000-Watt Power Supply 

with 10 output voltages 

The HWS1000 series 

of 1000-Watt power 

supplies are suitable 

for powering 

process control, ATE, 

factory automation 

and other equipment 

where high reliability 

and extended life 

under extreme conditions 

is required. The units are available in 10 nominal 

output voltages including: 3.3, 5, 6, 7.5, 12, 15, 24, 

36, 48 and 60-volts. In addition, most models can be adjusted 

up to +/-20% of its nominal voltage to accommodate 

non-standard system voltages. The 7 through 60volt 

models have a peak power rating of up to 1200W 

when operated with a line voltage of 200VAC or higher. 

The supplies accept a wide range of input voltages 

from 85 to 265VAC and complies with the EN61000-3- 

2 power factor and harmonic correction standards. 

The power supplies include an integral extended-life fan 

and can be operated in an ambient temperature range 

up to -10 to 71°C. 

LAMBDA 

Tel. +44-1271-856666 • Fax +44-1271-864894 


Pull-Wire Switches 

with wire breakage detection 

These pull-wire switches are 

available in two basic versions 

– the ZQ 900 and ZT 900. The 

ZQ 900 is a safety emergency 

switch, similar to an emergency-stop 

switch, which fulfils 

the requirements of the 

new standard BS EN ISO 

13850:2006 by latching in the 

emergency-stop position if actuated 

and requiring a manual 

reset by means of a release 

button. The ZT 900 version 

has non-latching contacts and is suitable for non 

safety-related applications. Both include wire breakage 

detection that automatically switches to the ‘OFF’ position 

if the actuating wire breaks or is removed. Both 

switch ranges can be equipped with a maximum of four 

contacts, be actuated from any point of the wire, and 

be used as universal command devices. The convenient 

location of the reset button on the ZQ 900 allows the 

triggering of the safety function to be monitored, 

even at large distances. 

K.A. SCHMERSAL 

Tel. +49-202-64740 • Fax +49-202-6474100 


RM4045 

The right 

turn for the 

big jump 

A vertical sensation: The VIRIO makes the jump to the balancing 

of disk-shaped rotors a real pleasure. Even more accurate, 

more flexible and even easier to operate. And guaranteed 

to be safe to CE regulations. So – why not take the jump. 

www.schenck-rotec.com 

The Group THE ART OF ROTATION 



contactless, compact, 

customerspecific = carefree 

Hall effect sensor technology 

Low profile controls 

Customerspecific & standard versions 

High quality & long lifespan 

hall 6 • stand 441 

Joysticks for 1 to 3 axes 

Megatron is looking for distributors 

in the UK. Please contact us. 

Angle sensors 

www.megatron.de 

For SLI: enter 15727 at www.tim-info.com/ien For SLI: enter 14961 at www.tim-info.com/ien





Single Board Computer 

64bit, needs only one slot 

Equipped with Intel’s 

latest Core 2 Duo 

processor T7500 with 

a frequency of 

2.2GHz, optionally also 

with L7500 or 

U7500, the F18 is the 

highest-performing 

member of the Intelbased 

CompactPCI 

Single Europe product 

family. The 64bit 

board provides a 667/800-MHz frontside bus and high 

performance graphics, which accelerate above all digital 

image processing such as CAD tools, 2D/3D modeling, 

video and rendering applications. The F18 is a 32bit/33 

MHz system slot or stand-alone board and needs 

only one slot on the CompactPCI bus. In combination 

with a PCI Express side card the F18 can also be used as 

a system slot board in CompactPCI Express systems. 

Thanks to a fast, soldered 4GB DDR2 SDRAM, a CF slot 

and a SATA hard disk slot the F18 offers abundant 

memory space. 

MEN MIKRO ELEKTRONIK 

Tel. +49-911-993350 • Fax +49-911-99335901 


Heatsink Enclosures 

allow in situ adjustment of electronics 

The Lawtronics HSK extruded 

aluminium units 

consist of two sliding 

channels together with 

end panels. This 

arrangement enables 

the electronics to be 

worked on in situ when 

the top half of the casing 

is slid open. The 

free-standing or 3U rack 

mount models provide 

a rugged, low thermal impedance housing for sensitive 

electronics. Eurocard boards can slide into internal 

card guides, enabling power devices to be attached to 

the heatsink section of the vertical wall with an M3 screw 

and half nut, with no need for drilling. Two boards can 

be mounted within the black anodised enclosure, and 

standard spacers can be used to support heavy components. 

Available in 160 or 220mm lengths, they have a 

normal wall thickness of 2mm, increasing to 7mm adjacent 

to power devices. Internal and external M4 nut 

'T' slots are provided for mounting. 

ASTROSYN 

Tel. +44-1634-815175 • Fax +44-1634-826552 


High Voltage Modules 

fibreglass-strengthened housing 

The HiPro HV- 

Module is 

designed for 

voltages up to 

13kVDC (nominal 

voltage) and 

a rated current 

of up to 30A. 

Recessed Cucrimp-contacts 

ensure high 

damage and safety protection and can be attached to 

different wire gauges from 0,5 – 4,0mm 2 . The PTFE 

HV-Module withstands voltages up to 15kVDC and a rated 

current up to 25A. It is available either as one-pin or twopin 

configuration. Resistant against heat and creepache 

current, the module can also withstand pulsed voltages. 

Both modules are constructed within a molded and fibreglass-strengthened 

housing and can be operated in 

temperature ranges from -40 to 125°C. The modules are 

inserted into a fixation frame and then into an IP65 cast 

steel-housing available in different sizes with a wide variety 

of locking-systems, cable-entries and –glands. 

GES ELECTRONIC & SERVICE 

Tel. +49-8165-95020 • Fax +49-8165-950215 


Current Generator 

programmable, multi-channel 

The Yokogawa GS820 

multi-channel 

source/measure unit 

is a programmable 

DC voltage and current 

generator capable 

of high-speed and 

highly accurate measurement 

of the voltage, 

current and other characteristics of semiconductor 

devices and other electronic equipment. The GS820 is 

capable of accurate voltage and current generation. The 

unit also features a USB storage function. The GS820 can 

simultaneously generate and measure two different types 

of signal. Since up to four units can be connected to one 

master unit, it is possible to expand the input/output 

capacity to a maximum of 10 channels, making it possible 

for the GS820 to simultaneously measure many functions 

of multi-terminal and multifunctional semiconductor 

devices. Parameters such as signal output switchover, 

signal output range switchover, and measurement data 

acquisition times can each be measured in approximately 

1ms. 

YOKOGAWA 

Tel. +31-33-4641611 • Fax +31-33-4641859 


Fanless Box PC 

lower power consumption 

The IS-2100, a tiny 

Box PC as a fanless 

solution it also provides 

small dimensions 

of only 196.3 

(W) x 68 (H) x 120 

(D) mm. The embedded 

control system 

comes equipped with 

an ADE-2100 board 

and VIA V4 Bus Eden 1.0 GHz CPU to provide lower power 

consumption with 5.5W. Due to integrated chipset 

CX700M the Box PC can be equipped with DDR2 400/533 

SODIMM memory up to 1GB. Graphic buffer size goes 

to 128MB with MPEG-2/4 decoding supported and provides 

dual display with VGA and DVI. The device can install 

one 2.5" HDD and provide one CF socket, two serial 

ports, dual Ethernet controllers, and six USB 2.0 ports 

for communication with diverse devices with a high transfer 

rate. Coming with the single +12V DC-in power input 

and an optional VESA kit for most wall mounts or 

the flat panel mounting, it adapts to various environments. 

LEAD 

Tel. +49-221-954790 • Fax +49-221-95479-88 


Touchscreen Display 

with improved functions 

An new HG1F touchscreen 

display has a 

bright (500 cd/m 2 ) high 

contrast monochrome 

LCD with a resolution 

of 300x100 pixels and 

carries sixteen adjustable 

brightness levels. An 

analogue touch panel 

means objects can be 

expanded from the minimum 

16x16 pixel size and placed anywhere on the screen. 

The ability to display your application in landscape or 

portrait mode with scrollable pages means the HG1F can 

handle most complex tasks. High speed O/I links means 

up to 16 HG1F units can be connected together for sharing 

of information and when connected to a PLC, ladder 

programming is possible if the pass through programming 

mode is selected. The thin housing has all connection/access 

points at the rear, RS232, RS485, programming, 

replaceable battery and with a depth of only 35mm 

means the HG1F can fit into the smallest of spaces. 

IDEC ELECTRONICS 

Tel. +44-1256-321000 • Fax +44-1256-327755 



Connector Jack 

with magnetic filter and LED light pipes 

The Y-ConJack-31 is a new 

RJ45 connector jack for 

PCB with integrated magnetic 

filter, and LED light 

pipes for the function display. 

The jack is particularly 

suited to industrial 

applications such as industrial 

Ethernet. The 90°-angled 

jack for the THR PCB 

is fitted with an all-round optimised EMV shielding 

made of nickel-plated brass. The two integrated light 

pipes on the left and right next to the mating face lead 

the light forwards onto each of the LED light sources 

mounted onto the PCB, hence emitting a function signal. 

The colour selection is dependent only on the LED 

that is used, hence making the jack very flexible for all 

applications. The jack is fitted with data contacts and 

two additional power contacts. These power contacts 

are universally integrated into all components. This 

makes costly double wiring superfluous for electrical supplies, 

which would have to be protected especially for 

raw field applications. 

YAMAICHI ELECTRONICS 

Tel. +49-89-451090 • Fax +49-89-45109110 


Digital I/O Scan Test Module 

testers provide flexibility 

The JT 2111/MPV Digital I/O 

Scan (DIOS) module adds 

programmable voltages to 

facilitate the enhanced testing 

of complex printed circuit 

boards. When connected 

to a circuit board via 

edge connector or fixture 

test pins the module enhances regular interconnect 

tests by exercising the board's connections in synchronisation 

with native boundary-scan components. The module 

features PLDs (Programmable Logic Devices) and a 

10MHz oscillator, so can be programmed to perform more 

custom functional and pattern tests. The hot-swap feature 

offers improved test throughput by allowing test 

targets to be connected/disconnected from the fixture 

without cycling power. 100% backward compatibility 

is ensured by simulation of the former DIOS devices. Both 

output and input thresholds can be programmed to 1.5, 

1.8, 2.5 or 3.3V. The I/O channels are grouped into 

blocks of 16 channels and, any number of 16-channel 

groups can be bypassed. Up to 10 modules can be 

daisy-chained together. 

JTAG TECHNOLOGIES 

Tel. +31-40-2950870 • Fax +31-40-2468471 


Networking Gateway 

supports Ethernet and Wi-Fi 

The E2W/ESL1 is a pluggable 

extension for the 

DIL/NetPC ADNP/9200, 

allowing integration of 

this compact computer 

module into IEEE802.11 

Wi-Fi networks. The 

E2W/ESL1 expansion is 

attached directly to the 

DIL/NetPC. The AD- 

NP/9200 owns two completely independent 10/100Mbps 

LAN interfaces with separate MAC and PHY-units. Both 

interfaces are controlled by the 180MHz ARM9 processor. 

The memory equipment consists of 32MB Flash 

and 64MB SDRAM. The Flash includes an Embedded Linux 

with appropriate drivers, a complete TCP/IP protocol 

stack and different servers. Beside the two Ethernet 

interfaces, there are four UARTs, three USB ports, one 

16bit bus interface and numerous GPIOs available. 

With the possibility to add own software components 

and to execute them under the embedded Linux of the 

ADNP/9200, the platform is well-suited for acting as a 

wireless gateway for industrial Ethernet networks. 

SSV EMBEDDED SYSTEMS 

Tel. +49-511-4000045 • Fax +49-511-4000040 


Sifter 

in stainless steel 

The Quadro Sifter segregates, 

retains and allows 

for easy removal of impurities 

through its positive, 

360° discharge. By prescreening 

material before 

entering downstream 

equipment, it reduces risk 

of contamination. 

YTRON-QUADRO 

Tel. +44-1494-792898 

Fax +44-1494-792699 



Water-Jet 

cuts complex contours 

The compact Hydro-Jet 

Eco machine uses both 

pure-water and abrasive 

cutting, making precise 

cuts in a wide range of 

materials, including stainless 

steel, marble, granite, 

glass, ceramic materials 

and composites. 

KNUTH 

Tel. +49-4321-6090 

Fax +49-4321-609140 



Control Valve 

for large flows 

The DBOY control valve 

line in sizes from 5 to 20cm 

is capable of large flows, 

allowing it to replace larger 

calibre valves. It can 

be customized and configured 

to meet the application's 

demand by utilizing 

cage guided trims 

that provide extra strength 

and rigidity. 

LESLIE CONTROLS 

Tel. +1-813-9781000 

Fax +1-813-9780984 



Trusted Embedded Automation Computers 

Fanless, Cableless and Diskless Design 



Embedded Automation Computers 

Embedded Design without Moving Parts for Harsh Environments 

Embedded Linux, Windows CE & XP Embedded Ready Platform 

Compact Size with DIN-Rail/Wall/Panel/Desktop Mounting Options 

PC/104, PC/104+, PCI-104 and PCI Expansions 

UNO-1019 

Intel XScale UNO 

With 2 x LAN, 

4 x COM, CF Card 

UNO-2059E 

AMD GX2 UNO 

With 4 x COM, 

LAN, PC Card 

www.advantech.com/eA 

UNO-2182 

Intel Core 2 Duo UNO 

With 2 x LAN, 

4 x COM, DVI 

RoHS 

COMPLIANT 

2002/95/EC 


83 

SERIES 

UNO-3074 

Intel Pentium M UNO 

With 4 x PCI, 

PC Card 

Modular timers 16 A 

Mono-function, multi-function and multi-voltage 

• Multi-voltage versions with 

“PWM clever” technology 

• Six time scales from 0.1s to 20h 

• High input/output isolation 

• “Blade + cross” - both flat 

blade and cross head screw 

drivers can be used 

• 22.5 mm wide 

• 35 mm rail (EN 50022) mount 

Europe 

Germany / Düsseldorf 49-211-97477-310 

France / Grenoble 33-4-7670-4700 

Italy / Milano 39-02-9544-961 

Netherlands / Roosendaal 31-165-550-505 

UK / Berkshire 44-1344-989-500 

Produttore di relè e temporizzatori dal 1954 

FINDER S.p.A. 

10040 Almese (TO) 

Tel 011.9346211 

Fax 011.9359079 ISO 9001:2000 ISO 14001:2004 

® 

catalogo on-line 

www.finder.it



utilizes magnetic, ultrasonic, optical, radar or conductive technology… 

For a standard or application-specific thermocouple, RTD or bimetal 

switch to reliably monitor temperature… The choice is Madison. 

Sensor solutions for 

today and the future 

FREE 

Catalog 

Madison Europe • +31 (0) 548 659 034 

on CD 

Fax: +31 (0) 548 659 010 • E-mail: madison@eurodev.com 

www.madisonco.com 


oac-com.com • G335 For a standard or custom-engineered level monitoring device that 


Connector System 

installation within seconds 

The universal MTS M-Series 

connector system enables 

quick installation of 

the position sensors. The 

sensor is integrated into 

the hydraulic cylinder and 

connected electrically within 

seconds. The connector 

system meets the most exacting protection requirement according 

to EN 60529 (important feature for the difficult environmental 

conditions of mobile hydraulics applications). 

Protection type IP69K makes the robust metal housing not 

only completely dust- and waterproof; even the harshest 

cleaning measures using high-pressure equipment cannot 

damage the sensor. 

MTS SENSOR TECHNOLOGIE 

Tel. +49-2351-95870 • Fax +49-2351-56491 


Industrial Controller 

combination of substance and style 

The DS1000 features four RS232 

ports. Rugged yet streamlined, 

its waterproof housing combines 

mechanical strength with 

an elegant appearance that 

will set the controller apart 

from other devices on your DIN 

rail. Its functionality is determined 

by whatever BASIC application 

it is running. It allows 

you to create rich web-enabled 

applications supporting browser-based configuration, direct 

TCP and UDP communications, email, data storage, etc. Thus, 

the device is suited to work as an intelligent serial controller, 

serial device server, or serial communications gateway. 

TIBBO TECHNOLOGY 

Tel. +886-2-26925443 • Fax +886-2-26923139 


Shotbolt Lock 

ATEX approved 

The Shotbolt GSCE037 has 

been specifically designed 

to meet the demand for electrical 

locking within hazardous 

areas and environments 

in which explosive atmospheres 

may exis. Protected 

against water and 

dust ingress to IP54, the shotbolt 

is equipped with a robust 

nose mounting, slip-on coil 

and an enclosed tube with threaded mounting nose to 

provide a high degree of mechanical protection. It includes 

a 1m long moulded cable, long-life bearings, integral 

spring return and a stainless steel bolt. 

MAGNET SCHULTZ 

Tel. +49-833-11040 • Fax +49-833-1104333 


Spectrometer Modules 

1 inch cube miniature 

The RC series 1 inch cube 

miniature spectrometer modules 

are suitable for use in 

small, hand held sensor products 

and instruments. The 

C9407MA and C9409MA feature 

a reflection grating permanently attached to a wide 

dynamic range CMOS linear image sensor. They cover the 

spectral range from 340 to 780nm and light is input from 

the sample under measurement via a 30cm long integrated 

fibre-optic cable. These mini-spectrometers provide 

cost-effective solutions to meet the needs of OEM customers. 

They allow flexibility during product development, 

and offer ruggedness, environmental stability, easy electrical 

interfacing and long-term stability of spectral calibration. 

HAMAMATSU PHOTONICS 

Tel. +44-1707-294888 • Fax +44-1707-325777 


Ethernet Edge Switches 

with “big switch” power supply features 

A line-up of IPS42 integrated 

power supply 

packages extends that 

capabilities of various 

ranges of edge switches. 

With more than 

1,600 individual Edge 

Switch configurations 

available, the compact 

packaged IPS42 products offer integrated AC/DC, 

125VDC dual source, 48VDC dual source, 24VDC dual 

source, or integrated AC power input. The customer simply 

specifies the power supply package and Edge Switch 

combination desired at the time the order is placed. All 

IPS42 power supplies are UL Listed for user safety. 

GARRETTCOM 

Tel. +44-870-3825777 • Fax +44-2392-603959 


2-wire DC Sensors 

without reduction factor 

The 2-wire DC sensors is available 

as M12, M18, M30 and 

CK40 version. If the sensors are 

combined with the Remote- 

I/O Fieldbus system BL20, 

events of wire break or short 

circuit can be detected immediately. 

The Factor 1 sensors 

of the Uprox+ family do 

not have a reduction factor 

and therefore the switching 

distance to materials like steel, 

stainless steel, copper, brass and aluminium is identical. 

Simple and space saving mounting are further advantages 

of these sensors. 

TURCK 

Tel. +49-208-49520 • Fax +49-208-4952264 


Vibration Energy Harvesters 

battery-free sensing 

The instrinsically safe ATEX 

version of the PMG17 vibration 

energy harvester offers 

battery-free sensing for condition 

monitoring and asset 

management applications in 

hazardous oil, gas, chemical 

and petrochemical environments 

where flammable gases may be present. Energy 

harvesting technology can be integrated into wireless 

sensor nodes in these areas. The PMG17 transforms 

the kinetic energy of machine vibration into electrical 

current, which is sufficient to power complete wireless 

sensor nodes, including sensors, micro processors and 

802.15.4 transceivers. 

PERPETUUM 

Tel. +44-23-80765888 • Fax +44-23-80765889 


Accelerometer 

provides vibration monitoring 

The 621B40 high-frequency 

ICP accelerometer 

works with online 

or portable monitoring 

systems to provide reliable, 

effective vibration 

monitoring. It operates 

to 30kHz, even with 

a magnet, and captures 

high frequency gear mesh faults which are typically missed 

during routine route-based measurements. Due to the 

sensor’s high frequency range, it is well-suited for 

measurements on high-speed compressors, gear boxes 

and turbomachinery, for early detection of impending 

problems. 

IMI SENSORS 

Tel. +1-716-6840003 • Fax +1-716-6843823 


For SLI: 13201 at www.tim-info.com/ien


7742_UK_MTE08 

Source the complete spectrum of sensors, 

measurement, and instrumentation, including: 

• Actuators 

• Analysers 

• Calibrators 

• Components 

• Connectivity 

• Controls & Controllers 

• Control Software 

and Systems 

• Drives 

• Data Acquisition 

• Ethernet & Fieldbus 

• Industrial Networking 

• Industrial PCs & PLCs 

• Instrumentation 

• Intelligent Valves 

and Actuators 

• Intrinsic Safety 

• Quality Assurance 

• Radio Networking & SCADA 

• Signal Conditioning 

• Sensors 

• Soft PLC Technology 

For queries, please contact: 

Tel: +44 2031 474620 • Fax: +44 2031 474613 • E-mail: metc@pmltd.ie 

Register online for complimentary exhibition hall admission at 

Please use Promo Code: AB 

MEDICA 2007,Booth A-16 


Organised by OctoMedia Ltd, a CANON COMMUNICATIONS LLC company 

Kent House, Romney Place, Maidstone, Kent ME15 6LH 

Tel +44 1622 772405 • Fax +44 1622 661687 


MIMO Test System 

for WiMAX devices 

The new IQmax MIMO system is aimed at WiMAX devices 

with Wave 2 functionality meeting the mobility adjuncts 

to the current WiMAX standard (IEEE standard 

802.16e-2005). The current WiMAX mobile radio interface 

uses scalable orthogonal frequency-division multiple 

access (SOFDMA) and supports multiple-input 

multiple-output (MIMO) communications technology. 

The result is greater coverage, lower power consumption, 

and more efficient spectrum and bandwidth utilization. 

The IQmax MIMO solution combines multiple 

IQmax-500 hardware units with IQsignal software. 

Both have been updated to include the new MIMO requirements. 

LITEPOINT 

Tel. +1-408-4565000 • Fax +1-408-4560106 


Ethernet I/O Modules 

reliable signal acquisition in the field 

A new compact series 

of intelligent 

Ethernet I/O modules 

is launched 

with distributed 

solutions for measurement, 

control 

and regulation 

tasks. From now 

on I/O signals can 

be acquired and 

processed directly 

at production machines 

even in tough environments. Thanks to IP65 

protection, an extended temperature range and protective 

circuitries expensive switching cabinets are no 

longer necessary. Modules with counter, digital and 

analogue I/O can be combined and synchronised using 

a connection part that is composed of Ethernet, 

Trigger/Synchro and 24V voltage supply. There is no need 

anymore for special solutions since the user can realise 

multi-channel, synchronous and dynamic measurements, 

based on standard Ethernet. 

ADDI-DATA 

Tel. +49-7223-94930 • Fax +49-7223-949392 


Differential Hall Switch 

for position sensing 

iC-MZ is an integrated 

device consisting 

of a differential Hall 

switch with back-end 

complementary line 

drivers. The two integrated 

Hall sensors 

are set 2mm apart 

and sense the difference 

in magnetic 

field. Magnetic DC fields are not evaluated; this means 

that besides the direct scanning of magnetic pole 

wheels with an additional bias magnet ferromagnetic 

gear wheels can also be detected. The magnetic input 

frequencies range from DC to 40kHz. Magnetic DC 

fields of up to 500mT are tolerated. A magnetic difference 

in signal of 5mT is sufficient to switch the outputs. 

The output drivers are RS422-compatible. Their output 

characteristics are adapted to the characteristic impedance 

of long lines in order to minimize reflections 

at the end of the line. With a supply voltage of 24V a 

driver current of at least 200mA can be supplied. The 

supply voltage ranges from 5 to 36V. 

IC-HAUS 

Tel. +49-6135-9292300 • Fax +49-6135-9292192 


Exhaust Hose Lines 

compact designs for high temperatures 

Newly developed hoses employ a combination of highperformance 

silicone and aramid tensile member. Used 

for temperature control, drainage and lubrication they 

successfully meet the demanding requirements of modern 

exhaust management systems. Thanks to cost-effective 

and process-reliable manufacture followed by 

mandrel curing shaping, the silicone hoses can be ideally 

adapted to the engine compartment. The materials 

are approved for temperatures as high as 205°C. Connections 

with aluminum and steel pipes, connectors and 

additional heat shields for radiation heat in excess of 

205°C round off the portfolio. 

CONTITECH 

Tel. +49-511-93814020 • Fax +49-511-93814025 


Water Test Kits 

revitalised with a portable comparator 

The DIGI test kits 

include advancedphotometers,colorimeters,meters 

and titration 

systems and the 

ECON test kits 

include stick meters, 

drop tests 

and the brand 

new ECON Comparator. 

The comparator is self-contained, portable 

water analysis system, offering accuracy, durability and 

compatibility. The unit features include multi-range 

discs, mirror system for altering path length, continuous 

gradient colour discs, compensation for coloured samples, 

uni-directional cells, suitable for left handed users 

and more. Thoughtful development of photometer 

grade sachet and liquid reagents give repeatable and 

accurate results with the ability to use the same reagents 

on conventional field equipment; minimizing stock 

and increasing versatility. 

KITTIWAKE DEVELOPMENTS 

Tel. +44-1903-731470 • Fax +44-1903-731480 


Mini PLC 

for small and medium PLC applications 

The IndraLogic L10 is 

based on the extremely 

compact 

control hardware 

and is suitable for 

centralized and decentralized 

use in 

the lower performance 

range. It comes 

with 1MB program 

memory, 2MB data 

memory and 32 kB 

memory for remanent 

data and its 

processing time is 150µsec (1000 IL commands). Its resources 

are sufficient for implementation of small and 

medium PLC applications in factory automation. An Ethernet 

interface, 8 digital inputs and 4 digital outputs are 

integrated onboard the new control hardware Indra- 

Control L10. The I/O expansion is as easy and flexible as 

always through the scalable Rexroth Inline I/O product 

range. The firmware and application data are filed to 

an exchangeable Compact Flash. 

BOSCH REXROTH 

Tel. +49-9352-180 • Fax +49-9352-1840 



Compact Guided Cylinders 

double or single acting 

The body, the end covers and the rods connection plate of 

the GEDB series cylinders are made in anodized aluminium; 

the piston rod is in C45 chrome-plated steel. These cylinders 

features self-lubricating bushings, in sintered bronze, the 

guiding rods are in chrome-plated and ground steel. The guiding 

rods are in chrome steel hardened and chrome-plated. 

A one-piece body is provided with grooves allowing the mounting 

of the magnet reed switch without further brackets; this 

makes the magnetic sensor not protrude outside the body 

itself. The bottom plates are provided with elastic cushionings. 

A.P.I. 

Tel. +39-0331-823511 • Fax +39-0331-823480 


Optimized Filters 

for DC applications 

The FMEB and 

FMEC filters for DC 

applications have a 

current rating up 

to 30A at 80VDC. 

The filters guarantee 

a safe operation 

by attenuating 

disturbances in 

the control and 

communication circuits 

in electrical 

cabinets and controls. 

The FMEB filter 

series is designed 

for a maximum operating 

voltage of +80VDC, while the series FMEC offers 

connections for two polarities at maximum ±80VDC. 

The primary side is equipped with screw clamps and the 

secondary side with 6.3mm x 0.8 quick connect terminals. 

The aluminum housing offers mounting straps 

securely fasten the filter. These filters are approved to 

ENEC and UL/CSA. 

SCHURTER 

Tel. +49-7642-682129 • Fax +49-7642-68288129 


Optical Engine Modules 

in thermally engineered package 

The 100W CW optical engine modules integrate the entire 

fiber amplifier or laser glass elements like active fibers, 

passive fibers, pump combiners, fiber Bragg gratings (FBGs), 

pump dumps and filters into a thermally engineered package. 

This enables fiber laser manufacturer or system integrator 

to reduce the product development time and 

to concentrate on the full system development and 

integration. The current line of optical engine modules 

consists of ytterbium fiber based CW laser and amplifier 

modules emitting at the 1030-1090nm wavelength 

range, with output powers up to and exceeding 100W. 

LIEKKI 

Tel. +358-19-357391 • Fax +358-19-3573949 


PowerMOSFETs 

reduced leakage current 

The NP-series of PowerMOSFETs is manufactured in 

the UMOS-4 process technology and also features an advanced 

packaging solution using a unique multi-bonding 

technology that doubles the number of bonding wires 

from two to four wires. The additional bonding wires 

allow higher currents with very low on-resistance in relatively 

small packages. These features enable an optimal 

power dissipation management of the overall circuit. 

Furthermore, the TO-263-7 PowerMOSFETs help reducing 

the amount of PCB space necessary to handle heat 

dissipation. 

NEC ELECTRONICS 

Tel. +49-211-65030 • Fax +49-211-65031327 


Rotary Table 

tilt range of +110° 

The TW2180 is a twin spindle table, tilting axis rotary unit 

capable of supporting simultaneous machining operations 

of two workpieces in a single set up. It measures 

just 999mm wide and features two 180mm diameter tables 

with maximum indexing speeds of 33.3 rev/min. The 

table provides a tilt range of +110° of vertical and a tilt 

axis speed of up to 16.6 rev/min. With clamping torques 

of 400Nm in the rotary axis and up to 800Nm in the tilting 

axis, the unit is suitable for aggressive, high speed 

machining operations. It can also be fitted with an optional 

rotary joint to allow pneumatic or hydraulic fixtures 

to be used without external pipework, improving 

tool access and increasing the available machining area. 

KITAGAWA 

Tel. +44-1725-514000 • Fax +44-1725-514001 


Electronic 

Control 

Valves 

Clippard Minimatic® 

valves are quiet in operation 

and produce consistent results. 

The small size makes them wellsuited 

for a wide range of applications. 

Whether you need a modular, solenoid 

or proportional control valve— 

Clippard is the name 

you can trust. 

Clippard Europe S.A. 

+32 10 45 21 34 

www.clippard.be 





Switches and Pilot Lights 

bright and clear LED illumination 

The Idec A-series miniature 

control units comprise 

a range of pushbutton 

switches and 

pilot lights to fit panel 

cutouts of 8, 10 and 

12mm in diameter. Typical 

applications include 

test and measurement, 

medical electronics and instrumentation. 

They are suitable for space-sensitive applications with 

a body length of only 22mm. The units are lightweight, 

weighing 2 to 4g; at the same time have a robust construction. 

The 12mm versions are available sealed to IP65 

and come with a wide range of accessories such as 

dust covers and PCB mounting sockets. Key specifications 

include a long life with a minimum of 100,000 mechanical 

operations and 50,000 hours typical LED life. 

Operating temperature is -25 to 55°C. The devices offer 

high shock and vibration resistance. The switches feature 

snap-acting, double -throw contacts, UL-CSA approval, 

latching or momentary switching action and an 

engravable marking plate. 

IDEC ELECTRONICS 

Tel. +44-1256-321000 • Fax +44-1256-327755 


Lead-free Bearings 

for high-pressure applications 

The DP4 bearings are designed 

to withstand the 

high pressures generated by 

downsized equipment. 

Rare-earth fibers in the 

coating enable them to 

withstand up to 10MPa x 

m/s lubricated, speeds exceeding 

2.5m/s, loads up 

to 250MPa and temperatures from -200 to 280°C. Exceptional 

resistance to both flow and cavitation erosion make 

the bearings suitable for start/stop applications. These 

bearings perform well dry under light-duty conditions. 

Because they are lead-free, they are also suitable for use 

in applications where corrosion might occur. Industrial 

applications include lifting equipment, hydraulic 

pumps and motors, pneumatic equipment, medical 

equipment, textile machinery, agricultural equipment, 

scientific equipment, drying ovens and office equipment. 

The structure of the bearings consists of a rigid steel backing, 

to which is bonded a porous bronze sinter interlayer 

impregnated and overlaid with a filled PTFE bearing 

layer. 

GGB 

Tel. +49-7131-2690 • Fax +49-7131-269500 


Beamex ® MC5 Multifunction Calibrator 

Beamex ® CMX Calibration Software 


LIQUID PUMPS 

• Powered by low pressure air to produce 

HIGH PRESSURE Gas or Hydraulic Power 

• Explosion proof. No electrical power required 

• Pressures to 80,000 PSI for LIQUID PUMPS, 

25,000 PSI for GAS BOOSTERS, and 

4,500 PSI for AIR AMPLIFIERS 

• Over 320 standard models to choose from to 

meet your gas & liquid boosting requirement 

• Pressure maintained without consuming 

energy or generating heat 

• Top quality grade 316L & 15-5 pH stainless steel 

materials used in the pumping medium 

• Weatherproof and suitable for offshore service 

(most models) 

GAS BOOSTERS & 

AIR PRESSURE AMPLIFIERS 

HYDRAULICS INTERNATIONAL, INC. 

Visit our web site: 

9201 Independence Ave., Chatsworth, CA 91311, USA www.hiipumps.com HYD-142 

Tel: +1-818-407-3400 Fax: +1-818-407-3428 © 2007 HII 


Visit us on the web at www.carrlane.com 

Try me for 

FREE 

Register to download 

www.beamex.com/calibrationsolution 

Beamex ® 

CMX Light demo 

Carr Lane’s 

Complete Line 

of tooling components for jigs and fixtures 

• Alignment Pins • Spring-Loaded Devices • Hoist Rings 

• Screw Clamps • Knobs and Handles • Clamp Straps 

• Supports, Rests, Feet • Toggle Clamps • Chuck Jaws 

• Nuts, Bolts, Washers • Locators • Modular Fixturing 

• Specialty Clamps • Hammers • Leveling Feet 

• Drill Jig Bushes • Threaded Inserts • Plug Gages 

Whatever your tooling component needs 

are, we deliver on time... at your doorstep... 

to your specifications. 

FM 35617 

Carr Lane offers standard components to help you 

increase quality and productivity. 

ISO 9001-2000 

CERTIFIED 


R 

MANUFACTURING CO. 

4200 Carr Lane Ct., P.O. Box 191970 

St. Louis, Missouri 63119-7970 

Phone: 314-647-6200, FAX: 314-647-5736 

Web Site: www.carrlane.com 


Save costs and improve 

quality of calibrations. 

The Beamex ® calibration system improves the quality 

and effi ciency of the entire calibration system through 

faster, smarter and more accurate management of all 

calibration assets and procedures. Beamex calibrators, 

workstations, calibration software and professional 

services form an integrated, automated system. 

PPortable 

calibrators 

Workstations 

Calibration software 

Professional services 

Industry solutions 

Carr Lane’s Online 

Catalogue is now available 

in these languages: 

• French 

• Spanish 

• Italian 

• German 

• English 

www.carrlane.com/Catalog 

When you need it! 

Where you need it! 

How you need it! 

www.beamex.com 

info@beamex.com


Measure yourself with one of us 

Lika. Measure made to measure. 

Steady research, design and production, performed wholly inside the 

company, guarantee to Lika Electronic performance, functionality, 

and customer specific solutions. Thus optical 

encoders, magnetic measurement systems and 

positioning units come to life, capable of measuring 

themselves with the leading European companies. www.lika.biz 



Thermal Interface Material 

silicone based, fiberglass-reinforced 

Sil-Pad 1200 is a silicone based fiberglass-reinforced thermal 

interface material, featuring an optional adhesive coating. 

The material's smooth and non-tacky surfaces allow 

for easy re-positioning and error reduction in assembly. 

Sil-Pad 1200 is supplied without a liner in dry form and 

on a carrier liner when supplied with optional adhesive 

coating. Applications include power supplies, motor controls, 

automotive electronics and placement between 

an electronic power device and its heatsink. 

BERGQUIST 

Tel. +31-35-5380684 • Fax +31-35-5380295 


Ethernet Switch 

withstands harsh conditions 

The Secure-Switch I-Series 

Ethernet switch is 

built to withstand the 

hot, dusty and explosive 

gas conditions of manufacturing 

plants or energy 

industry facilities. 

It achieves an ANSI/ISA Class-1, Division-2 rating with convection 

cooling; redundant DC power; industrial-grade 

components; and self-healing, sub-second, rapid-recovery 

ring topology protocols. An optional memory configuration 

card allows a field replacement of a unit by 

simply pulling the configuration card out of the old switch 

and inserting it into the new one. Copper and fiber I/O 

modules deliver 100Mbps Ethernet performance with 

dual Gigabit Ethernet uplinks to offer up to 24 ports of 

100BaseTX, 16 ports of 100BaseFX, or a combination of 

fiber and copper connectivity with dual industrialgrade 

SFP optical uplinks. It offers business-oriented, policy-based 

visibility and control of users, sensors and 

applications, each user and device is authenticated before 

being granted access to the network with a specific 

set of authorized privileges. 

ENTERASYS NETWORKS 

Tel. +1-978-6841000 • Fax +1-978-6841658 


Asset Condition Manager 

collects real-time condition data 

The InFusion Condition 

Manager version 2.2 collects 

and analyses realtime 

diagnostics from 

plant production assets, 

drives the appropriate 

actions, and shares that 

information with plant 

databases and HMIs. It is a real-time asset condition management 

component for the InFusion enterprise control 

system (ECS) and other platforms. It collects, aggregates, 

and analyses real-time data from the full array 

of plant production assets, including (but not limited to) 

sensors and actuators, pumps, motors, compressors, 

turbines, dryers, and heat exchangers; and even entire 

process units. It interoperates with Invensys and thirdparty 

applications supported through the InFusion application 

environment. The equipment condition and 

maintenance information can be displayed on plant 

process control and engineering HMI workstations. 

The system can feed data to a variety of different plant 

Historian packages to allow the data and actions to be 

historised and made available to other systems. 

INVENSYS SYSTEMS 

Tel. +44-1293-526000 • Fax +44-1293-416104 


Documenting Calibrator 

mechanical, electrical and thermal values 

The Digistant model 

4423 represents the 

first calibrator for mechanical, 

electrical 

and thermal values 

that also documents 

the results effectively. 

50 calibration routines 

with up to 21 

measuring values each can be saved in the non-volatile 

memory. After a check of the input data, a possible adjustment 

and a check of the output data the measuring 

values are acquired simultaneously. With a robust 

aluminium console housing for its use on site or 

in the lab, it offers a wide range of measure and 

source of 13 types of thermal elements, 13 RTD types, 

resistance, current, voltage, frequency/impulse, pressure, 

force, torque and displacement. Practically any 

sensor may be connected to the Digistant. The smart 

sensor interfaces hold all special calibration data from 

the connected sensors in a non-volatile memory. The 

Digistant recognizes all connected sensors automatically 

via the plug and measure connection. 

BURSTER PRÄZISIONSMESSTECHNIK 

Tel. +49-7224-6450 • Fax +49-7224-64588 


Wireless DemoKits 

integrate wireless functions fast 

A new range of wireless DemoKits include all the essential 

functions required to evaluate RF products, carry out 

RF measurements and develop a prototype. Features 

include an immediate connection to a PC serial port, permitting 

a simple and rapid configuration of the radio 

module with the parameters required by the application 

providing easy evaluation of sensitivity, power 

and all RF parameters. All the DemoKits have chip areas 

as well as direct access to all the radio module’s signals 

allowing the easy addition of additional electronics. 

ADEUNIS R.F. 

Tel. +33-4-76920162 • Fax +33-4-56389403 


Swinghandle 

protects against vandalism 

This dual cylinder swinghandle 

is designed to protect 

the internal components 

of electronic cabinets 

from the threat of 

vandalism in outdoor enclosure 

applications. The 

robust design offers several 

anti-vandalism features 

including a surrounding 

reinforced edge around the perimeter of 

the swinghandle, a reinforcing bar in the housing that 

makes it impossible to pry the handle open from the front 

and a tight gap between the handle and its housing which 

reduces the chance that the swinghandle can be pried 

open. An optional metal guard is also available to protect 

the handle from tampering. These features allow 

the dual cylinder swinghandle to meet analogue DIN 1630 

standards. The swinghandle is equipped with dual lock 

cylinders and can be opened by operating either one 

of the lock cylinders independent from the other. This 

makes is suitable for applications where two users with 

different keys require access to the same cabinet. 

DIRAK 

Tel. +49-2333-837146 • Fax +49-2333-837103 


Compressed Air Nozzle 

cuts noise level 

The company offers 

a new stainless 

steel Laval 

nozzle with a 

concentrated air 

stream that effectively 

cleans 

at greater distance. 

The stainless 

steel Laval 

nozzle utilises 

compressed air 

optimally by surrounding 

a supersonic 

core stream 

of air with a protective 

sheath moving parallel to the core jet. Around 

the central Laval orifice there are diverging slots and holes 

that generate quiet, powerful and laminar air streams. 

The nozzle is suitable for tough applications like those 

found in the glass industry, paper mills, foundries, steel 

mills etc. They fully comply with OSHA safety regulations 

and the EU Machine Directive’s noise limitations. 

SILVENT 

Tel. +46-33-237900 • Fax +46-33-237910 


Stand-off Sleeves 

more clearance on handles 

The DS-EBP stand-off sleeves provide extra clearance on 

EBP series handles. This enables them to accommodate 

gloved hands or to suit design criteria where 

there is reduced reach available, or where there is a need 

to clear or span other components. The sleeves are 

fully stackable in 18mm, 20mm or 21mm step heights, 

depending on handle selection, and many sleeves may 

be added together to give significant height increase. 

The handles with the stand-off sleeves retain both 

front and back mounting facilities dependant upon 

the handle selected, as well as the option of various colour 

cap possibilities. 

ELESA 

Tel. +39-039-28111 • Fax +39-039-836351 


Finding high quality industrial suppliers 

doesn’t have to be a gamble. 

Search the world, go to... 

www.thomasglobal.com 

Source thousands of industrial suppliers 

“worldwide” quickly and easily with 

Thomasglobal.com 

Are you spending more and more time searching online for 

industrial suppliers only to not find what you are looking for? 

Can you really afford to gamble with search results that may not 

deliver the suppliers and services you need? Thomasglobal.com 

provides sourcing agents and engineers with the contact 

information on thousands of industrial suppliers worldwide. 

Save time and find the industrial suppliers you need 

for your next job at Thomasglobal.com. 

Connecting Industrial Buyers and Suppliers 

Worldwide 



LVDT Smart Indicator 

with mixed transducer interfacing 

The new Model 4215-LVDT Smart Indicator combines two 

LVDT (Linear Variable Differential Transformer) channels, 

print capabilities and RS232/485 serial communication 

into a versatile platform. Mixed transducer interfacing, 

including LVDT, DC Strain Extensometer, and Quadrature 

encoder-based position measurement devices is possible. 

With automatic plug and play operation, it is 

electrically compatible with Transducer Electronic Data 

Sheets (TEDS). Model 4215-LVDT features A/D is 24bit, 

the D/A is 16-bit, sample rate of 60/s, core accuracy 

is 0.005%. The Model 4215 LVDT is standard with 2line, 

VFD display. 

ELECTRO-STANDARDS LABORATORIES 

Tel. +1-877-9431164 • Fax +1-401-9465790 


Sound and Vibration Analyser 

reduces inspection time 

The MIG16-AQS is a multi-channel sound and vibration 

analyser incorporating 24-bit technology designed 

specifically for the capture and real-time analysis of vibration 

and acoustic analysis from production engines, 

gearboxes, electric motors and most any other rotating 

component. Capable of automatically recognizing abnormal 

noises caused by manufacturing and assembly 

defects the MIG-16AQS systems guarantee production 

quality as well as repeatable and accurate “first failure” 

analysis for product engineering. Up to sixteen 24-bit 

input channels are available for dynamics measurements, 

each with a separate 102KHz sampled 24-bit A/D 

converter. 

RED-ANT MEASUREMENT TECHN. AND SERVICES 

Tel. +49-89-30568990 • Fax +49-89-306589999 



Is there 

any way to 

break them? 

Our pressure sensors are not only marked 

by their compact design, but also by their 

enormous robustness. They have long-term 

stability and are not sensitive to mechanical 

stress or aggressive measuring materials. 

Their welded stainless steel construction 

makes internal sealing elements obsolete. 

Almost nothing can harm them. 

Characteristics at a glance: 

■ Compact design 

■ Wide variety of connections 

■ Numerous current and voltage signals 

■ High EMV protection according to EN 61326 

www.tecsis.de | pressure@tecsis.de 




Post 

PROGRESSIVE 

MANUFACTURING 

SLI 

Speed Link Infoservice 

SLI 

Internet 

Easy - Instant - Informative 

www.tim-info.com/ien 

Post 

Managing Automation, the leading multimedia resource 

for business and technology managers in manufacturing, 

is pleased to announce its fourth annual 

Progressive Manufacturing 50 Awards Program. 

Every year, we honor manufacturing companies of all sizes around 

the world that have achieved success in at least one of eight award 

categories which are critical to business success in the years ahead. 

more information about your 

We invite you to nominate your most promising manufacturing 

projects for this prestigious international awards program. 

products of interest 

AWARD CATEGORIES: 

e information about your 

● Business Model Mastery ● Data and Integration Mastery 

● Innovation Mastery 

● Education and Training Mastery 

● Customer Mastery 

● Operational Excellence 

products ● Supply Network of Mastery interest 

● Leadership 

2008 

One winner will be selected as the 

Progressive Manufacturer of the Year. 

Now Accepting Nominations* 

For more information, to view past winners or 

to nominate your project, go to: 

managingautomation.com/awards 

Or contact Elizabeth at telephone +1(718)596-6906 

or e-mail ManagingAutomationPMAwards@thomaspublishing.com 

*Nominations are being accepted in the English language only. 


Internet 

Choose your own way to obtain 

se your own way to obtain 

Frame Grabber 

single/dual-channel 

The MVS-8600e family of 

frame grabbers connect 

Camera Link cameras 

through the PCI Express 

(PCIe) interface. They are 

available in single-channel 

and dual-channel models, 

and equipped with 

high performance machine 

vision software tools. 

COGNEX 

Tel. +33-1-47771550 

Fax +33-1-47771555 



Test Handler 

multifunctional 

The Easy Test Handler automates 

the test procedures 

in electronics manufacturing, 

offering single 

and double-sided contacting 

of the test objects. 

The test equipment finds 

place in a 19” rack inside 

the Easy Test Handler. 

IPTE 

Tel. +32-89-623000 

Fax +32-89-623010 



LCD Screens 

rugged construction 

The TS range LCD touch 

screen monitors are available 

in sizes from 9” to 

12” with the rugged construction 

and metal bezel. 

The TFT LCD screen is driven 

by analogue RGB via 

a VGA connector and the 

touch screen has a USB interface; 

the in-built controller 

supports resolutions 

up to 1024 x 768, and user 

parameters are set via OSD. 

BVM 

Tel. +44-1489-780144 

Fax +44-1489-783589 



Radial Spinner System 

for use with cylindrical parts 

This radial spinner 

system offers the 

possibility to apply 

neat, uniform bands 

of adhesives, lubricants, 

and other 

production fluids 

inside cylindrical 

parts between 0.4 

and 5” in diameter. 

The ability to apply 

fluids in neat, uniform 

bands make 

the system ideal for 

processes where 

controlled amounts 

must be applied inside small cylinders or confined to specific 

locations. The system combines a compact air-driven 

motor, a low-maintenance dispense valve and an EFD 

ValveMate controller. The valve dispenses a precisely metered 

amount of fluid onto a spinning disk attached to 

the motor. As fluid reaches the disk’s edge it spins off, 

forming a neat, uniform band inside the part. 

EFD 

Tel. +44-1582-666334 • Fax +44-1582-664227 


Power Supply 

24VDC input, 400W output 

The BES-640C from Bicker Elektronik is an industrial power 

supply with 24Vdc input and delivers full 400W output 

power. The power supply also features a wide input 

from 18 to 32VDC, catching voltage variations 

from the source. It is designed to work within a temperature 

range from 0 to 50°C. Input cables are screwed on 

the front bracket so even strong vibrations will not bring 

them to release. The output cable harness offers ATX 

and P4 connectors. The power supply suits in all kinds 

of standard PC towers or rackmounts in replacement of 

the existing AC/DC power unit. 

BICKER ELEKTRONIK 

Tel. +49-906-705950 • Fax +49-906-7059555 


Temperature Sensor 

for high-shock environments up to 80 G’s 

The new miniature Model A9540 temperature sensor 

designed to perform in high-vibration and high-shock 

environments (up to 80g’s) features a flat mounting surface 

and weighs less than 0.2 grams. Ruggedly constructed 

of ceramic, the A9540 is a platinum wire-wound element. 

Temperature range is -260 to 400°C; interchangeability 

is +/- 1°C at 0 °C. Other features include; 

ice-point resistance up to 1,000Ω as well as insulation 

resistance to 10MegΩ and a very low time constant (0.3 

seconds max). 

WEED INSTRUMENT 

Tel. +1-512-4342800 • Fax +1-512-4342801 



Level Regulators 

for all liquids 

The SOBAs are offered in different models, for a normal 

or intensive use in most existing liquids. The HR-HY 

range is very successful in the chemical industry, and our 

recent floats ATEX Ex listed are compulsory for use in 

sewage pumping stations and with explosion-proof 

pumps, in hazardous areas 0, 1 and 2. The regulators are 

supplied with appropriate ballast adjustable on the 

cable. All of them will operate for millions of cycles, and 

are thoroughly tested before delivery. 

ATMI 

Tel. +33-1-61373560 • Fax +33-1-61373569 


Cable Solutions 

for measurement of cavity pressure 

Multi-channel connectors with four (Type 1708A0) or eight 

(Type 1710A0) channels are 26mm deep and are based 

on single-wire and cut and grip technology. They allow 

the sensor cables to be connected and disconnected quickly 

without any additional tools. Single-wire technology 

also allows the sensor cables to be readily cut to the 

required length and simply repaired. With thermocouple 

amplifier Type 2205A (HxWxD 29x53x30 mm), which 

is integrated directly into the mold, multi-channel cabling 

is also available for combined pressure and temperature 

sensors. This provides reliable and simple cable 

system for pressure, temperature and combined measurements. 

KISTLER INSTRUMENTE 

Tel. +41-52-2241111 • Fax +41-52-2241414 


Inspection System 

compact desktop solution 

The AOI system OptiCon SmartLine was designed as a 

desktop system for small volume manufacturing, to 

be used as an offline test station or repair station. At 

its' core lies a camera-based imaging unit featuring 

custom telecentric lens as well as a flexible illumination 

concept of different colours and directions. The desktop 

solution saves space as the PC is completely integrated 

into the main chassis, thus only monitor and keyboard 

need be connected to work with the system. Therefore, 

it can be utilised at a wide range of positions in the production 

process. Despite its compact construction, it provides 

a PCB inspection area of 400mm x 300mm. 

GOEPEL ELECTRONIC 

Tel. +49-3641-68960 • Fax +49-3641-686944 


Profibus Compact Repeater 

small size and flexible application 

The Profibus Compact 

Repeater covers transmission 

rates from 

9.6Kbit/s to 12MBit/s. 

The transmitted signals 

are regenerated by the 

repeater and resent. 

The repeater can be 

used for bus extensions, 

increasement of the 

nodes as well as for 

plant extensions. The 

operation in MPI networks 

is also possible. 

Due to the compact 

shape, no additional 

room is needed in the 

cabinet, as the it can 

be used instead of 

Profibus Connector, or 

simply plugged onto a node in the Profibus Network. No 

separate power supply is needed. The integrated status 

LEDs provide a fast overview on the current BUS status. 

SYSTEME HELMHOLZ 

Tel. +49-9135-73800 • Fax +49-9135-738050 


Fit for every purpose: 

The new Sendix Encoder 

Technology 

Incremental and Absolute 

Singleturn, Multiturn and Fieldbus 

IP 67 - 40° + 90° 

2/22 

RoHS 

Safe 

Breakdowns and machine stoppage eliminated, 

thanks to sturdy bearing construction, with Safety- 

Lock Design, and to magnetic field resistant 

technology. 

Fast 

Very high clock frequencies (up to 10 MHz), very 

short control cycles, fast start-up. 

Versatile and Compact 

The unique modular concept allows for an undreamt 

of array of versions. Through hollow shafts 

up to 15 mm in 58 mm size. Very compact design. 

www.kuebler.com 

+ 49 (0) 77 20 - 39 03-0 

Please vist us: SPS/IPC/DRIVES 

Nürnberg, hall 7A, stand 430, 

from 27.11. to 29.11.2007 


Extreme conditions 

are no challenge 

for our corporate 

network – 

they are for me 

in my spare time. 

Weidmüller's AdvancedLine 

Managed Switches offer 

top reliability where you 

really need it. 

• Operating temperature range 

–40 to +75°C 

• Fan-less operation 

• Broad range of 

voltages, 

10V to 36V DC or 

10V to 24V AC 

• Very compact design 

• Extremely durable: 

MTBF > 60 years 

• All fibre optic 

standards: 

LC, SC, ST, ... 

• All protocols: 

TCP/IP, PROFINET, 

EtherNet/IP, ... 

• Maritime approvals 


See further Information at: 

www.weidmueller.de/IndustrialEthernet 

ie-support@weidmueller.de 

Advanced Network Devices 




American and British 

inch sized screws 

USA - fasteners 

Screw thread types: 

Over 30 years experience in trading and in supplying 

customers with inch sized fastening items. 

Don´t hesitate to ask us – We shall be pleased 

to help you. 

Peter Schröder GmbH 

Silcherstr. 38 • D-74172 Neckarsulm 

Telephone: +49 (0) 71 32/99 60-0 

Facsimile: +49 (0) 71 32/99 60-60 

info@schroederschrauben.de 

www.schroederschrauben.de 


Autec, 

when safety matters. 


www.autecsafety.com +39.0444.901000 

COMPANIES IN THIS ISSUE 

3DX-Ray . . . . . . . . . . . . . . . .14 

A A.P.I. . . . . . . . . . . . . . . . . . . .35 

ADDI-DATA . . . . . . . . . . . . .34 

Adeunis . . . . . . . . . . . . . .6, 38 

Adimec Advanced 

Image Systems . . . . . . . . .12 

Advantech . . . . . . . . . . . . . .31 

AE Industries . . . . . . . . . . . .15 

Aerotech . . . . . . . . . . . . . . . .4 

Aigotec . . . . . . . . . . . . . . . . .40 

Alpha Gearheads . . . . . . . . .21 

Anders Electronics . . . . . . . .14 

ASM Automation 

Sensorik Messtechnik . . . .16 

Astrosyn . . . . . . . . . . . . . . .30 

ATMI . . . . . . . . . . . . . . . . . . .41 

Autec . . . . . . . . . . . . . . . . . .42 

B Bachmann Electronic . . . . . .23 

Baldor . . . . . . . . . . . . . . . . . .23 

Banner Engineering . .4, 5, 36 

Bartec . . . . . . . . . . . . . . . . . .19 

Baumer Hübner . . . . . . . . . .21 

BEA / Sensorio . . . . . . . . . .26 

Beamex . . . . . . . . . . . . . . . .37 

Beckhoff Automation . . . . .33 

BEI IDEACOD . . . . . . . . . . . .23 

Beijer Electronics . . . .2, 13, 15 

Bergquist . . . . . . . . . . . . . . .38 

Bernecker + Rainer . . . . . . .17 

Bicker Elektronik . . . . . . . . .40 

Boker’s . . . . . . . . . . . . . . .4, 16 

Bosch Rexroth . . . . .15, 29, 34 

Brodersen Controls . . . . . . .25 

Burster 

Präzisionsmesstechnik . . .38 

BVM . . . . . . . . . . . . . . . .28, 40 

C Camille Bauer . . . . . . . . . . . .24 

Carr Lane . . . . . . . . . . . . . . .37 

Castell Safety . . . . . . . . . . .16 

Cedes . . . . . . . . . . . . . . . . . . .8 

Cedip . . . . . . . . . . . . . . . . .7, 9 

Chian Cheng . . . . . . . . . . . .30 

Clippard . . . . . . . . . . . . . .5, 35 

Cognex . . . . . . . . . . . . . . .7, 40 

Comitronic . . . . . . . . . . . . .36 

ContiTech . . . . . . . . . . . . . . .34 

Coxreels . . . . . . . . . . . . . . . . .6 

D Dailywell Electronics . . . . . .28 

Danaher Motion - 

Portescap . . . . . . . . . . . . .19 

Data Translation . . . . . . . . .26 

Delta Line . . . . . . . . . . . . . . .21 

Destek . . . . . . . . . . . . . . . . .30 

Deutz . . . . . . . . . . . . . . . . . .23 

Dirak . . . . . . . . . . . . . . . . . .38 

Dow Corning . . . . . . . . . . . .15 

Dr. Fritz Faulhaber . . . . . . . .18 

Drives . . . . . . . . . . . . . . . . . .20 

DSM Computer . . . . . . . . . .24 

E EFD . . . . . . . . . . . . . . . . .36, 40 

Elcis . . . . . . . . . . . . . . . . . . . .24 

Electro- 

Standards Laboratories . .39 

Elesa . . . . . . . . . . . . . . . . . . .39 

Eltrotec Sensor . . . . . . . . . . . .9 

Enterasys Networks . . . . . . .38 

Epson . . . . . . . . . . . . . . . . . .43 

Esit Elektronik . . . . . . . . . . .42 

Eyevis . . . . . . . . . . . . . . . . . .14 

F Festo . . . . . . . . . . . . . . . . . .16 

FGP Sensors . . . . . . . . . . . . .32 

Finder . . . . . . . . . . . . . . . . . .31 

Fischer Elektronik . . . . . . . .35 

Fixturlaser . . . . . . . . . . . . . . .9 

Flir Systems . . . . . . . . . . . . . .9 

Fluid Metering . . . . . . . . . . .16 

Fluke . . . . . . . . . . . . . . . . . . . .8 

Fritz Kübler . . . . . . . . . . . . .41 

G GarrettCom . . . . . . . . . . . . .32 

Gates . . . . . . . . . . . . . . . . . .20 

Gefran . . . . . . . . . . . . . . . . . .3 

GES Electronic & Service . . .30 

Getriebebau Nord . . . . .21, 22 

GGB . . . . . . . . . . . . . . . . . . .37 

Globtek . . . . . . . . . . . . . . . . .8 

Goepel electronic . . . . . . . .41 

H Hamamatsu Photonics . . . . .32 

Hannay Reels . . . . . . . . . . . .28 

Hans Turck . . . . . . . . . . . . . .32 

Harting . . . . . . . . . . . . . . . . .36 

Haydon Motion . . . . . . . . . .26 

Henke-Sass, Wolf . . . . . . . . .2 

HepcoMotion . . . . . . . . . . . .43 

Hiblow . . . . . . . . . . . . . . . . .12 

Hima Paul-Hildebrandt . . . .43 

Hirschmann 

Automation and Control .26 

Hitachi Kokusai Electric . . . .10 

Hydraulics . . . . . . . . . . . . . .37 

I IC-Haus . . . . . . . . . . . . . . . . .34 

IDEC Electronics . . . . . . .30, 37 

IDS Imaging 

Development Systems . . . .9 

ifm electronic . . . . . . . . . . . . .8 

igus . . . . . . . . . . . . . . .4, 16, 28 

IMI Sensors . . . . . . . . . . . . . .32 

IMS-Intelligent 

Motion Systems . . . . . . . .19 

Inmoco . . . . . . . . . . . . . . . . .15 

Invensys Systems . . . . . . . . .38 

IPTE . . . . . . . . . . . . . . . .28, 40 

J J.V.L. Industri Elektronik . . . .19 

Jaquet Technology Group . .28 

Jovean & Rogy . . . . . . . . . . .32 

JTAG Technologies . . . . . . .31 

K K.A. Schmersal . . . . . . . . . . .29 

KAC . . . . . . . . . . . . . . . . . . . .24 

Kimo Constructeur . . . . . . .16 

Kistler Instrumente .24, 41, 43 

Kitagawa . . . . . . . . . . . . . . .35 

Kittiwake . . . . . . . . . . . . . .34 

Knuth . . . . . . . . . . . . . . . . .31 

Koatsu Gas Kogyo . . . . . . . . .7 

Kontron . . . . . . . . . . . . . . . . .6 

Kurt Manufacturing . . . . . .16 

KV . . . . . . . . . . . . . . . . . . . . . .3 

L Lambda . . . . . . . . . . . . . . . . .29 

Lead . . . . . . . . . . . . . . . . . . .30 

Leica Microsystems . . . . . . . .7 

Lenze . . . . . . . . . . . . . . . . . .23 

Leslie Controls . . . . . . . . . . .31 

Leutron Vision . . . . . . . . . . .14 

Liekki . . . . . . . . . . . . . . . . . .35 

Lika . . . . . . . . . . . . . . . . . . . .38 

LitePoint . . . . . . . . . . . . . . . .34 

Lumel . . . . . . . . . . . . . . . . . .16 

M Madison . . . . . . . . . . . . . . . .32 

Magnet Schultz . . . . . . . . . .32 

Managing Automation . . . .40 

Manz Automation . . . . . . . .28 

maxon motor . . . . . . . . .20, 44 

mbo Osswald . . . . . . . . . . . .36 

Megatron . . . . . . . . . . . . . . .29 

Men Mikro Elektronik . . . . .30 

Mini Motor . . . . . . . . . . . . .26 

Minimotor . . . . . . . . . . . . . .19 

Mitsubishi Electric . . . . . . . . .5 

Moeller . . . . . . . . . . . . . . . .12 

Molex Services . . . . . . . . . . .36 

Moog Controls . . . . . . . .24, 43 

Moritex . . . . . . . . . . . . . . . . .9 

Motion Control Products . .19 

Moxa Networking . . . . . . . .36 

Moxa Technology . . . . .15, 20 

MTEC . . . . . . . . . . . . . . . . . .34 

MTS 

Sensor Technologie . .11, 32 

N NEC Electronics . . . . . . . . . .35 

Nedap AVI . . . . . . . . . . . . . .25 

Nematron . . . . . . . . . . . . . . . .8 

Nemoptic . . . . . . . . . . . . . . .12 

Newport . . . . . . . . . . . . . . . .28 

Nexans . . . . . . . . . . . . . . .2, 26 

Nippon Pulse Motor . . . . . .23 

Nuova Fima . . . . . . . . . . . . .12 

O Olympus Deutschland . . . . .12 

Omron . . . . . . . . . . . . . . . . .10 

Ondrives . . . . . . . . . . . . . . . .23 

Optibelt . . . . . . . . . . . . . . . .20 

P Parker Hannifin . . . . . . . . . .16 

Perpetuum . . . . . . . . . . . . . .32 

Peter Schröder . . . . . . . . . . .42 

Pickering Interfaces . . . . . . . .5 

PM Bearings . . . . . . . . . . . . .21 

Power Jacks . . . . . . . . . . . . .43 

Powerbox . . . . . . . . . . .12, 36 

Premosys . . . . . . . . . . . . . . .10 

Pryor Marking Technology .26 

R R+W Antriebselemente . . . .10 

Radan Computational . . . . .43 

Raytek . . . . . . . . . . . . . . . . .10 

Reality Sys . . . . . . . . . . . . . . .5 

Red-Ant . . . . . . . . . . . . . . . .39 

Renold Gears . . . . . . . . . . . .43 

Riko . . . . . . . . . . . . . . . . . . .36 

RLS Merilna Tehnika . . . . . .26 

RM Michaelides 

Software & Elektronik . . . .9 

Rockwell Automation . .12, 20 

Rotor Clip . . . . . . . . . . . . . . .29 

RTK Instruments . . . . . . . . . .7 

Ruhrgetriebe . . . . . . . . .20, 38 

S Sartorius . . . . . . . . . . . . . . . . .5 

Schaeffler . . . . . . . . . . . . . . .21 

Schenck RoTec . . . . . . . . . . .29 

Schneider Electric . . . . . . . .21 

Schunk . . . . . . . . . . . . . . . . . .8 

Schurter . . . . . . . . . . . . . . . .35 

Sensor Technology . . . . . . .24 

Sharp Microelectronics . . . . .7 

Siemens - A&D . . . . . . . .15, 25 

Sigmatek . . . . . . . . . . . . . . .27 

Siko . . . . . . . . . . . . . . . . . . . .20 

Silvent . . . . . . . . . . . . . . . . . .39 

Simex . . . . . . . . . . . . . . . . . . .2 

SKF . . . . . . . . . . . . . . . . . . . .24 

Smalley Steel Ring . . . . . . .30 

Sontay . . . . . . . . . . . . . . . . .26 

Specialised Imaging . . . . . . .8 

SPG . . . . . . . . . . . . . . . . . . . .10 

Sprint Electric . . . . . . . . . . . .23 

SSV Embedded Systems . . . .31 

Stemmer Imaging . . . . . . . .14 

Stockcap . . . . . . . . . . . . . . . .16 

SVS Vistek . . . . . . . . . . . . . . .6 

Systeme Helmholz . . . . . . . .41 

Systolic . . . . . . . . . . . . . . . . .14 

T Tecsis . . . . . . . . . . . . . . . . . . .39 

Testo . . . . . . . . . . . . . . . . . . . .4 

THK . . . . . . . . . . . . . . . . . . . .21 

ThomasGlobal.com . . . . . . .39 

Tibbo Technology . . . . . . . .32 

TopsCCC . . . . . . . . . . . . . . . .39 

Toshiba Teli . . . . . . . . . . . . .12 

Tsubakimoto . . . . . . . . . . . .36 

V Vacon . . . . . . . . . . . . . . .18, 25 

VDS Vosskühler . . . . . . . . . .10 

Vision Components . . . . . . .10 

WAGO Kontakttechnik . . . . .2 

Wandfluh . . . . . . . . . . . . . . .36 

Weed Instrument . . . . . . . . .40 

Weg Electric Motors . . . . . .43 

W Weidmüller . . . . . . . . . . . . .41 

Welco . . . . . . . . . . . . . . . . . .34 

Westermo . . . . . . . . . . . . . .25 

Woodhead 

Connectivity . . . . . . . .14, 24 

Y Yamaichi Electronics . . . . . .31 

Yokogawa . . . . . . . . . . . . . .30 

Ytron-Quadro . . . . . . . . . . .31 

Z Zeitlauf . . . . . . . . . . . . . . . . .14 

Zhejiang TianQi . . . . . . . . . . .8 

Zorn . . . . . . . . . . . . . . . . . . .43 

Note: bold for companies 

advertising in this issue 

CALENDAR OF EVENTS 

2007 

NOVEMBER 

• SPS/IPC/Drives, Nürnberg 

27-29 November 

www.mesago.de 

DECEMBER 

April 

• SEMICON 

5 – 7 December 

• Industrie 

Chiba, Japan 

31 March – 4 April 

www.events.semi.org 

Paris, France 

www.industrie-expo.com 

• Int’l Technical Exhibition on 

Image Technology and Equipment • WIRE 



Yokohama, Japan 

Düsseldorf, Germany 

www.seiki-tsushin.com/ite www.messe-duesseldorf.de 

• Manufacturing/Machine Tool 


Jakarta, Indonesia 

www.allworldexhibitions.com 

FEBRUARY 

2008 

• WIN part 1 

7 – 10 February 

Istanbul, Turkey 

www.win-fair.com 

• EasyFairs Antriebstechnik 


Dortmund, Germany 

www.easyfairs.com 

• MTEC 


Birmingham, UK 

www.cancom.com 

• Machine Building 



www.machinebuilding.co.uk 

• Machine Vision IPOT 



www.machinebuilding.co.uk 

• BI-MU 


Bari, Italy 

www.bimu-mediterranea.it 

• Magyarregula 


Budapest, Hungary 

www.magyarregula.hu 

• Intertool/ITU 


Kiev, Ukraine 

www.msi-fairs.com 

• WIN part 2 

28 February – 2 March 


www.win-fair.com 

MARCH 

• Lasys 

4 – 6 March 

Stuttgart, Germany 

www.messe-stuttgart.de 

• Maintec 

11 – 14 March 


www.maintec.co.uk 

• PTA-North West 

11 – 14 March 

St-Petersburg, Russia 

www.pta-expo.ru 

• Automatisierungstreff 

12 – 14 March 

Böblingen, Germany 

www.sindelfingerautomatisierungstreff.de 

• Motek 


Paris, France 

www.industrie-expo.com 

• RTS Embedded Systems 

1 – 3 April 

Paris, France 

www.birp.com 

• Automaticon 

1 – 4 April 

Warsaw, Poland 

www.automaticon.pl 

• Analytica 

1 – 4 April 

Munich, Germany 

www.analytica-world.com 

• MECSPE 

3 – 5 April 

Parma – Italy 

www.prhelp.it 

• Motek 

3 – 5 April 

Parma, Italy 

www.senaf.it 

• easyFairs Euromaintenance 

8 – 10 April 

Brussels, Belgium 

www.easyfairs.com 

• JEC Composites 

13 April 

Paris, France 

www.jeccomposites.com 

• Cable & Wire 

20 – 22 April 


www.cablefair.com 

• Hannover Messe 

21 – 25 April 

Hanover, Germany 

www.hannovermesse.de 

• Control 

22 – 25 April 

Stuttgart, Germany 

www.schall-messen.de 

Note: Dates and descriptions of 

events have been obtained from 

official industrial sources. The publisher, 

therefore, cannot be held 

responsible for errors, changes 

or cancellations. 

For more information visit: 

www.ien.eu

ROBOT ACCELERATES 

MEDICAL BULBS PRODUCTION 

The company Zorn, in 

Stockach in the South of 

Germany is producing precision 

light bulbs for the 

medical sector since more 

than 50 years. In order to 

fulfil all demanding specifications 

of those products, 

own systems for the 

manufacturing process 

needed to be designed 

and built, including semi-automated 

as well as 

fully automated production 

cells and lines, using 

Epson SCARA robot... 



SLUICE GATE JACKS IMPROVE 

WATER MANAGEMENT 

Small area water regulation 

makes a valuable contribution 

to the prevention 

of damage, whether it is 

caused by excess water or 

a lack of water. Sluice gate 

jacks from Power Jacks 

are the suitable solution 

for this. They are used on 

streams and rivers, in 

sluices and power stations 

to regulate the water level 

and turbine capacity 

and to drain and flush 

reservoirs. In open water 

near... 



AUTOMATED COIL CENTRING 

RELIES ON DOUBLE-ACT 

The HepcoMotion profile 

driven unit (PDU2) belt 

driven linear transmission 

was introduced as a high 

performance, cost efficient 

package and one 

example where the double-acting 

version of the 

system is demonstrating 

these characteristics is in 

an aluminium coil manufacturing 

plant in Conwy. 

Dolgarrog Aluminium 

is an independent and 

fully integrated rolling 

mill that prides itself... 



BURNER AUTOMATION TURNS 

INTO THE SAFETY SYSTEM 

HIMA automated an existing 

combustion plant at 

the Ludwigshafen production 

site belonging to BASF. 

In their solution, the entire 

automation system for the 

burner is integrated into 

the safety system. The standardised 

BMS application 

(BMS = Burner Management 

System) incorporating 

TÜV-approved function 

blocks simplifies the 

programming of the system 

and makes it easier for 

the chemical... 



SOFTWARE HELPS MEET 

MARKET DEMANDS 

The global naval, defence 

and commercial markets 

demand super-efficient 

working practices and the 

very best in technology 

from their suppliers. Aish 

Technologies specialises 

in the design and manufacture 

of multi-function 

and dual display consoles. 

The company's sheet metal 

department is the cornerstone 

of its manufacturing 

ability - and the 

use of Radbend CNC from 

Radan has been key to... 



HUGE SCREW DOWN GEARS 

SQUEEZING HOT STEEL 

Renold Gears has manufactured 

the heaviest 

pair of wormwheel gearboxes 

in the company's 

history. With a combined 

weight approaching 25 

tons, these huge gearboxes 

are destined for a 

steel mill on the other 

side of the world. Designed 

and manufactured 

to be installed in an existing 

steel mill in Asia, the 

gear units are to be fitted 

as the main drives of a 

screw down... 




SENSORS PROTECT SATELLITES 

DURING TEST 

Anyone who has watched 

a satellite launch live or 

on TV will realise that everything 

on board the launch 

vehicle is exposed to heavy 

vibration. To make sure 

European Space Agency 

(ESA) satellites and components 

can survive the 

extreme loads experienced 

during the launch phase. 

From the beginning, Kistler 

has been a major supplier 

of force sensors used to 

monitor and control the 

shaker systems... 



HIGH-TECH SHREDDER USES 

HIGH VOLTAGE MOTOR 

Followed up its success in 

supplying a special 

6,865KW high voltage 

electric motor for the 

world's largest industrial 

shredder, at Newport in 

Wales, WEG received major 

recycling order. This 

time for a 4,476kW 12pole 

high voltage machine 

installed on a new 

Lynx shredder, owned and 

operated by recyclers H 

Williams and Sons Ltd. 

at Hitchin in Hertfordshire... 



5-MICRON ACCURACY IN 

METALWORKING HYDRAULICS 

Moog hydraulic valves 

are adding brain to muscle 

at metalworking company 

Bronx Manufacturing, 

which builds specialist 

mechanical equipment 

for a diverse range of industries, 

from automotive 

to construction and 

from security to mining. 

The company, which has 

particular experience in 

metal forming and finishing 

within the steel industry, 

is fitting Moog's 

Digital Interface Valve... 



Also online: www.tim-info.com/ien 

IEN NR. 11/2007 08/2005 

Speed Link Infoservice 

SLI 

Easy - Instant - Informative 

1 

Post 

See card below 

Internet 

www.tim-info.com/ien 

Choose your own way to obtain 

more information about your 

products of interest 

© Thomas Publishing Co. 

FREE INFORMATION! 

Mail the card below, or fax it to +32-3-285 3337 

online www.tim-info.com/ien 

Industrial Engineering News 

c/o Thomas Industrial Media 

PO Box 56 

Lewes 

BN7 2WL 

UNITED KINGDOM 

2 

Write IEN 

product 

reference 

numbers 

here 

➩ 

Send 

representative 

Send 

product 

data 

Send 

price 

data 

Send 

dealer 

data 

STAMP 

Please tick your requirements

SLI - Speed Link InfoService 

PRIMARY END PRODUCT OR SERVICE OF YOUR 

COMPANY AT YOUR LOCATION 

YOUR JOB FUNCTION: (tick one only) 

IEN 11/2007 NR. 09/2005 

PLEASE CONTINUE SENDING ME IEN WITHOUT 

COST OR OBLIGATION ON MY PART 

Receive instantly information on Products and Advertisements published in IEN Europe 

Manufacturing Industries 

15 ❏ Fabricated metal products 

16 ❏ Machinery (except electrical) and equipment 

17 ❏ Electric, electronic, computing & communication equipment 

18 ❏ Scientific, measuring & control equipment 

19 ❏ Automotive, aircraft & transportation equipment 

20 ❏ Other Manufacturing: ............................................................... 

1 ❏ General or Corporate Management 

2 ❏ Product Design Engineering (incl. applied R&D) 

3 ❏ System Design Engineering (incl. applied R&D) 

4 ❏ Production Eng. (Process or Manufacturing) 

5 ❏ Test/Quality/Standards Engineering 

6 ❏ Operations/Maintenance Engineering 

7 ❏ Other Engineering 

8 ❏ Purchasing or Procurement 

9 ❏ Others: .................................................................................... 

YES NO 

by email: by internet: 

Please prepare and send your e-mail as Go to: www.tim-info.com/ien 

in the sample below: 

Processing Industries 

21 ❏ Primary metals 

22 ❏ Chemicals and allied products 

23 ❏ Plastics, rubber, petroleum and coal products 

24 ❏ Crude petroleum, natural gas, mining, quarrying 

25 ❏ Food, beverage and tobacco 

26 ❏ Paper, textile, leather 

27 ❏ Others Processing: .................................................................. 

SIGNATURE DATE 

COMPANY SIZE BY NUMBER OF EMPLOYEES: 

(tick one only) 

Name: .................................................................................................................. 

Function: ............................................................................................................ 

Services and Others 

28 ❏ Energy & water supply (electricity, gas, water, nuclear power) 

29 ❏ Engineering firms, consultants and contractors 

30 ❏ Public administration/Government/Military 

31 ❏ Education 

32 ❏ Importers, dealers, distributors of industrial products 

33 ❏ Others: ..................................................................................... 

10 ❏ up to 24 

11 ❏ 25-49 

12 ❏ 50 - 249 

13 ❏ 250 - 499 

14 ❏ 500 and more 

Company: .......................................................................................................... 

Dept.: .................................................................................................................. 

Street: .................................................................................................................. 

Postal code: .................... City: ...................................................................... 

Country: ............................................................................................................ 

:.................................................................................................................... 

☎ 

5-digit infonumber 

Your reader number 

FREE INFORMATION! 

Mail the card below, or fax it to: +32-3-285. 3337 

Online www.tim-info.com/ien 

Fax: .................................................................................................................... 

Email: .......................................... @.................................................................. 

Write IEN product reference Please tick your requirements 

numbers here 

Send Send Send Send 

represen- product price dealer 

tative data data data 

➩ 

New Readers: 

please fill in the reader service card on the left, or register online 

From time to time IEN may use your name and address to send information on related products 

and services which may be of interest to you. 

If you do not wish to receive this information, please tick this box 

❏ 

MORE SPACE PROVIDED AT THE BACK OF THIS CARD 

IEN 11/2007

View Full Issue - Thomas Industrial Media

Create successful ePaper yourself

Delete template?

Save as template?