Soil and waste product guide - CMS

PVC-U RING-SEAL SOIL SYSTEM: OsmaSoil
Offset Bends ■ Soil Manifold System
Offset Bends continued
Soil Manifold System
OSMA SOIL & WASTE SYSTEMS Product Guide 2005
www.wavin.co.uk
S/S Offset Bend – 67 1 /2°
z One plain end and one push-fit ring-seal socket
z Minimum achievable offsets:
82 115mm 110 137mm
MATERIAL: PVC-U, with EPDM seals
NOM. PART DIMENSIONS [mm]
SIZE NO. COLOURS A B C
82 3S444 BGEWN 95 87 123
110 4S444 BGEWN 110 105 147
D/S Offset Bend – 67 1 /2°
z Fitted with two push-fit ring-seal sockets
z Minimum achievable offset: 137mm
MATERIAL: PVC-U, with EPDM seals
NOM. PART DIMENSIONS [mm]
SIZE NO. COLOURS A B C
110 4S445 BGEWN 110 110 155
OsmaLink Soil Manifold
z One plain end and one push-fit ring-seal socket
z Permits up to three 50mm connections to be made at floor level
z Complies with BS EN 12056-2:2000 clause ND. 3.3.2
z Make connections using 2S354 (below), 2S355
or 2S356 (page 22)
z Minimum installation aperture: 240mm square
MATERIAL: PVC-U, with EPDM seals
NOM. PART DIMENSIONS [mm]
SIZE NO. COLOUR A B C D
110 4S595 BGEWN 138 55 160 275
All-Fit Reducer – 40:32mm
z Connects to 32mm [1 1 /2"] plastic pipe to
BS EN 1451-1/BS 5254 or BS 5255,
or to copper pipe manufactured to BS 659 or BS 2871
z Use with 2S355 (below) when a bend is required
MATERIAL: Polypropylene
NOM. PART DIMENSIONS [mm]
SIZE NO. COLOUR A
40 2S354 BGEWN 54
All-Fit Reduction Bend – 50:40mm
z Connects to 40mm [1 1 /2"] plastic pipe to
BS EN 1451-1/BS 5254 or BS 5255, or to copper pipe
manufactured to BS 659 or BS 2871
MATERIAL: Polypropylene
NOM. PART DIMENSIONS [mm]
SIZE NO. COLOUR A B
50 2S355 BGEWN 70 65
Soil Manifold System continued overleaf
PVC-U RING-SEAL SOIL SYSTEM: OsmaSoil
Bends ■ Adjustable Bends ■ Offset Bends ■ Soil Manifold System
21