Soil and waste product guide - CMS
Soil and waste product guide - CMS
Soil and waste product guide - CMS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PVC-U SOIL SYSTEM: Solvent Weld<br />
Offset Bends ■ Single Branches<br />
Offset Bends<br />
Single Branches<br />
See Design <strong>and</strong> Installation Guide <strong>and</strong> BS EN 12056:2000 on the prevention of crossflow<br />
OSMA SOIL & WASTE SYSTEMS Product Guide 2005<br />
www.wavin.co.uk<br />
SW/S Offset Bend<br />
z One solvent weld socket <strong>and</strong> one push-fit ring-seal socket<br />
z Minimum achievable offset: 137mm<br />
MATERIAL: PVC-U<br />
NOM. PART DIMENSIONS [mm]<br />
SIZE NO. COLOURS A B C<br />
110 4S435 BGEWN 99 105 143<br />
D/SW Offset Bend<br />
z Two solvent weld sockets<br />
z Minimum achievable offsets: 196mm<br />
MATERIAL: PVC-U<br />
NOM. PART DIMENSIONS [mm]<br />
SIZE NO. COLOURS A B C<br />
110 4S450 BGEWN 108 102 123<br />
D/SW Single Branch – 87 1 /2 º<br />
z Three solvent weld sockets<br />
z Three closed boss socket positions on 110mm fitting.<br />
160mm fitting has none<br />
MATERIAL: PVC-U<br />
NOM. PART DIMENSIONS [mm]<br />
SIZE NO. COLOURS A B C<br />
110 4S490 BGEWN 159 112 152<br />
160 6S490 BGEWN 222 161 240<br />
SW/S Single Branch – 87 1 /2 º<br />
z One plain end <strong>and</strong> two solvent weld sockets<br />
z Three closed boss socket positions<br />
MATERIAL: PVC-U<br />
NOM. PART DIMENSIONS [mm]<br />
SIZE NO. COLOURS A B C<br />
110 4S290 BGEWN 159 112 167<br />
D/SW Single 5-Boss Branch – 87 1 /2 º<br />
z Three solvent weld sockets<br />
z Five closed boss socket positions, of which two are positioned<br />
84mm below the centre-line of the branch entry. These can be<br />
used for low-level <strong>waste</strong> connections<br />
MATERIAL: PVC-U<br />
NOM. PART DIMENSIONS [mm]<br />
SIZE NO. COLOURS A B C D<br />
110 4S495 BGEWN 139 108 84 99<br />
PVC-U SOIL SYSTEM: Solvent Weld<br />
Bends ■ Offset Bends ■ Single Branches<br />
Single Branches continued overleaf<br />
35