FASTCAST™ tunnelling and underground products - CMS
FASTCAST™ tunnelling and underground products - CMS
FASTCAST™ tunnelling and underground products - CMS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Bucline Caisson Shaft Linings<br />
Materials<br />
Concrete<br />
The concrete mix design normally used provides for a<br />
characteristic strength of 50N/mm 2 at 28 days.<br />
All raw materials comply with current British <strong>and</strong><br />
European st<strong>and</strong>ards.<br />
Manufacturing is carried out in accordance with the<br />
requirements of our quality management system,<br />
audited by the British St<strong>and</strong>ards Institute (BSI) to<br />
comply with BSEN ISO 9001:2000.<br />
Caulking grooves <strong>and</strong> sealing grooves<br />
Segments are cast with caulking grooves on the<br />
internal circumferential <strong>and</strong> longitudinal sides.<br />
Rings also have grooves cast into the joint faces of<br />
each segment, for EPDM Gaskets.<br />
Special rings can be supplied to meet the specific<br />
requirements of a contract or a sealing system.<br />
Grout sockets<br />
Each segment has one coarse threaded plastic grout<br />
socket complete with a threaded plastic grout plug.<br />
Non return valves<br />
Plastic non return valves are provided.<br />
Packings<br />
Bituminous felt packing 3mm nominal thickness are<br />
used on all longitudinal joints <strong>and</strong> will be supplied with<br />
the rings.<br />
Special rings<br />
L<strong>and</strong>ing support is accomodated by st<strong>and</strong>ard sized<br />
rings with an integral corbel. Combined cutting edge<br />
<strong>and</strong> choker rings are available for many sizes.<br />
Tunnel <strong>and</strong> shaft linings An AMEC company<br />
7