MEMORANDUM TO: Holders of Contracts Documents FROM: Karen ...

More documents

Recommendations

Info

33.14.3 Goodyear tires shall be installed. 33.14.4 There shall be two additional interior lights. 33.14.5 There shall be an additional LED light above the passenger door. 33.14.6 The Center High Mounted Stop Light shall have a strobing module installed for continuous strobing whenever the brake pedal is depressed. 33.14.7 There shall be two antenna mounting plates with interior access hatches. 33.14.8 The interior mirror shall be 6” x 30”. 33.14.9 There shall be transition stone guards installed on the bus body just aft of the running boards. 33.14.10 There shall be a ‘Lift Enable’ switch installed in the dash. 33.14.11 ‘Boxes suitable for storing the wheelchair restraints shall be installed under the passenger seats just forward of the wheelchair positions. A battery box is an acceptable storage box. The storage box and location shall be approved at the Pre-Production Meeting. 33.14.12 A Rosco STSK7465 backup camera system shall be installed with a dash mounted monitor. 33.14.13 The exterior mirrors shall be manually adjustable, with LED turn indicators in the mirror. 33.14.14 All stanchions shall be stainless steel, powder coated safety yellow. 33.14.15 Wall grab handles, 6” minimum, shall be installed in the Wheelchair area in a location suitable for assisting a passenger in a wheelchair to maneuver. 33.14.16 The front bumper shall be a Romeo Rim "Help" energy absorbing type. Bumper shall be constructed of urethane rubber and uniformly black in color. 33.14.17 The driver’s seat shall be Recaro with a Norco power base. PAGE 34 OF 40
33.14.18 A Motorola Astro XTL 2500 two-way radio shall be installed on an extra heavy mounting duty mounting system. 33.14.19 A Ranger MDC system shall be installed. 33.14.20 Stainless Steel grommet covers shall be installed on all 4” signal lights on the rear of the bus. 33.14.21 Each vehicle shall be equipped with an Amerex V-25 fire suppression system. The system shall include a minimum of two temperature sensors and two (2) extinguishment nozzles located in the engine compartment as well as a temperature sensor and extinguishment nozzle located in the battery compartment. Contractor shall provide proposed specific configuration and mounting details for the MTA’s approval at the Pre-Production Meeting before the vehicles are built. 33.14.22 Ignition and door lock keys for all buses procured shall be identical. Each vehicle is to be delivered with four (4) sets of keys. The keypad for the passenger door shall be deleted. 33.14.23 Each vehicle shall be equipped with a brake retardation system that will maintain 90% effectiveness of braking H.P. through all operating ranges down to two (2) mph. The brake retarder shall be a Telma model AC50-55 (low amperage draw) or approved equal. 33.14.24 The passenger seat grab handles shall be safety yellow and there shall be no flip-up arm rests on the passenger seats. 33.14.25 The location of all equipment shall be approved by the MTA at the preproduction meeting. 33.15 Option 15: Diagnostic Equipment 33.15.1 Diagnostic equipment shall be offered for all subsystems, in addition to any diagnostic equipment already specified above. 33.16 Option 16: Training 33.16.1 The Contractor shall provide a program to educate, train and teach personnel in all details of the bus, as required, to enable the MTA to safely and satisfactorily operate, service and maintain the buses. One objective of the program shall be to develop within the property the capability to perform similar training under its own training program subsequent to the Contractor’s involvement. The training program shall be 40 hours minimum. 33.16.2 The Contractor shall submit a Training Plan with the Technical Proposal in accordance with the specifications requirements. The Training Plan will provide detailed information on the Offeror’s training program and the manner in which it proposes to meet the property’s training requirements. In addition, the Training Plan shall include the number of classroom and field instruction hours that the Offeror recommends for each system on the bus; the qualifications of the instructors; a list of training aids to be used and furnished; and a brief description of the scope of instruction to be covered. 33.17 Option 17: Backup Camera System 33.17.1 A Rosco Rearview Mirror/Monitor Backup Camera System, Model STSK4530W, or approved equal, shall be installed. The system shall utilize the rearview mirror to display a 4.3” LCD when the vehicle is put in reverse, allowing the driver to see behind the vehicle. The Color 1/3” CCD camera must be able to process images in all light conditions and have a 120 degree diagonal field of vision minimum. The system shall be weatherproof with an IP67 rating and NHTSA 49CFR Parts 571 and 585 compliant. The camera housing shall be white. The warranty shall be one year minimum. PAGE 35 OF 40
Page 1 and 2: MEMORANDUM TO: Holders of Contracts
Page 3 and 4: ITEM TWO: APPROVED EQUAL QUESTION A
Page 5 and 6: The last sentence in paragraph A.2
Page 7 and 8: The specification requires that the
Page 9 and 10: 1.0 GENERAL REQUIREMENTS 1.1 PURPOS
Page 11 and 12: 1.4 MATERIALS - INTERCHANGEABILITY,
Page 13 and 14: 1.7 VEHICLE TYPES 1.7.1 Type 1A - 1
Page 15 and 16: Front Axle 5,000 lbs., Minimum Rea
Page 17 and 18: 5.13 Contractor shall provide prici
Page 19 and 20: equirements of Section 11, CRASHWOR
Page 21 and 22: poisonous fumes in the event of fir
Page 23 and 24: in operation, any unsecured doors s
Page 25 and 26: 17.9 All windows shall be fitted wi
Page 27 and 28: 20.7 Wheelchair lift lights, which
Page 29 and 30: powder coated tubing to meet the re
Page 31 and 32: 24.16 An in-line circuit breaker, w
Page 33 and 34: 27 HEATING, AIR CONDITIONING AND VE
Page 35 and 36: 27.21.9 Condenser shall be high cap
Page 37 and 38: 30 NOISE 30.1 Interior noise level
Page 39 and 40: finished surface exposed as a resul
Page 41: 33.7.4 Bidder shall submit details
Page 45 and 46: Fabric Covered Interior Body Panels
Page 47 and 48: 38 SPECIAL TOOLS 38.1 The Offeror w
Page 49 and 50: ITEM FOUR: 1. DELIVERY/ACCEPTANCE:
Page 51 and 52: Specific subsystems and components
Page 53 and 54: Fleet Defect shall apply only to th
Page 55 and 56: 9. IN-PLANT INSPECTIONS A. The MTA
Page 57 and 58: 3. Each participating jurisdiction
Page 59 and 60: ITEM FIVE: UNIT PRICE SCHEDULE (REV
Page 61 and 62: SMALL BUS Item Description Quantity
Page 63: Miscellaneous 42 Lockable driver's

MEMORANDUM TO: Holders of Contracts Documents FROM: Karen ...

Create successful ePaper yourself

Delete template?

Save as template?