Operating and Installation Instructions Fridge/freezer ... - Miele.ca

Warning and Safety Instructions
The electrical safety of this
appliance can only be guaranteed if it
is properly grounded in compliance
with all applicable local and national
safety regulations. It is very important to
ensure that this essential safety
requirement is met. If there is any doubt
about the grounding of your household
wiring, have it inspected by a qualified
electrician.
The manufacturer will not be held liable
for damages resulting from an
inadequate grounding system (e.g.
electric shock).
Only professionals who are duly
authorized by the manufacturer may
install or perform maintenance and
repair work on this appliance.
Work performed by unqualified persons
harbors the risk of serious harm to the
user for which the manufacturer will not
be held liable.
Repair of the appliance during the
warranty period should only be
performed by a service technician
authorized by the manufacturer,
otherwise any damage will not be
covered by the warranty.
10
Disconnect the appliance from the
electrical power supply prior to
installation, maintenance or repair.
The appliance is disconnected when
one of the following conditions is met:
– the appliance has been unplugged.
To unplug, pull carefully on the plug,
NOT on the cord.
– the respective breaker of the house
wiring system is off.
Defective components should only
be replaced with genuine Miele original
spare parts. Only with these parts does
the manufacturer guarantee that they
comply with the safety requirements.
Installation of this appliance in
non-stationary locations (e.g. on ships)
must only be performed by a qualified
specialist who must ensure that the
conditions for safe operation are in
place.