Sewing Machine - Brother

More documents

Recommendations

Info

24 KNOWING YOUR SEWING MACHINE ——————————————————————————————————————————————————————————————————————————————————— d As shown, press down on the spool pin lever with your finger. The spool pin swings up. CAUTION ● Do not grab the bar to raise the spool pin, otherwise, the spool pin may bend or break. Remove the spool cap. e a Spool pin b Spool cap CAUTION ● Be sure to raise the spool pin before use. If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break. f g Fully insert the spool for the upper thread onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. Slide the spool cap onto the spool pin. With the slightly rounded side of the spool cap positioned toward the left, slide the spool cap onto the spool pin as far as possible to the right so that the spool is moved to the right end of the spool pin. CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break. ● Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break.
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————— Memo ● When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool. a c a Spool cap (small) b Spool (cross-wound thread) c Space While holding the spool with your right hand, h and then pass the thread under the thread guide. a Thread guide Pass the thread under the thread guide cover i from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a Thread guide cover b j k Feed the upper thread as shown in the illustration below. Make sure you guide the thread through the thread take-up lever from right to left as shown in the illustration below. a Thread take-up lever Memo ● If the needle is not raised, the thread takeup lever cannot be threaded. Be sure to press the needle position button to raise the needle before threading the thread take-up lever. 25 1
Page 1: Operation Manual Sewing Machine Pro
Page 4 and 5: 2 ———————————
Page 6 and 7: 4 ———————————
Page 8 and 9: 6 KNOWING YOUR SEWING MACHINE —
Page 38 and 39: 36 SEWING BASICS ——————
Page 48 and 49: 46 UTILITY STITCHES —————
Page 76 and 77:
74 UTILITY STITCHES —————
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
APPENDIX ————————
Page 84 and 85:
82 APPENDIX ———————
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
i APPENDIX ————————
Page 108:
English 885-V64/V65/V66/V67 XE8589-
show all

Sewing Machine - Brother

Create successful ePaper yourself

Delete template?

Save as template?