Sewing Machine - Brother

More documents

Recommendations

Info

70 UTILITY STITCHES ————————————————————————————————————————————————————————————————————————————————————————————————————— Scallop stitching The wave-shaped repeating pattern that looks like shells is called “scalloping”. It is used on the collars of blouses and to decorate the edges of handkerchiefs. Attach monogramming foot “N”. a Select stitch . b c Stitch along the edge of the fabric, making sure not to sew directly on the edge of the fabric. For better results, apply spray starch onto the fabric and press with a hot iron before it is sewn. Trim along the stitches. d Be careful not to cut the stitches. Smocking The decorative stitch created by stitching or embroidering over gathers is called “smocking”. It is used to decorate the front of blouses or cuffs. The smocking stitch adds texture and elasticity to fabric. Attach zigzag foot “J”. a b Select the straight stitch, and then adjust the stitch length to 4.0 mm (3/16 inch) and loosen the thread tension. For details, refer to “Selecting a stitch” (page 37) and “Thread tension” (page 41). c d Sew parallel stitching at intervals of 10 mm (3/8 inch). 1 a 10 mm (3/8 inch) Do not sew reverse/reinforcement stitches or cut the thread. Pull the bobbin threads to create gathers. Smooth the gathers by ironing them. Select stitch or . e Stitch between the straight stitches. f Pull out the threads for the straight stitches. g
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————— Shell tuck stitching The gathers that look like shells are called “shell tucks”. They are used to decorate trims, the front of blouses or cuffs made of thin fabrics. Fold the fabric along the bias. a Attach zigzag foot “J”. b c d e Select stitch , and then increase the thread tension. For details, refer to “Selecting a stitch” (page 37). Sew while making sure that the needle drops slightly off the edge of the fabric. a Needle drop point 1 Unfold the fabric, and then iron the tucks down to one side. Joining Decorative bridging stitches can be sewn over the seam allowance of joined fabrics. This is used when making a crazy quilt. Attach zigzag foot “J”. a b Sew together the right sides of the two pieces of fabric, and then open up the seam allowances. 3 a Wrong side of fabric b 6.5 mm (1/4 inch) seam allowance c Straight stitch Select stitch , or . c d 2 1 Turn the fabric over so that the right side faces up, and then sew over the seam with the center of the presser foot aligned with the seam. a Right side of fabric 1 71 3
Page 1:
Operation Manual Sewing Machine Pro
Page 4 and 5:
2 ———————————
Page 6 and 7:
4 ———————————
Page 8 and 9:
6 KNOWING YOUR SEWING MACHINE —
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23: 20 KNOWING YOUR SEWING MACHINE —
Page 38 and 39: 36 SEWING BASICS ——————
Page 48 and 49: 46 UTILITY STITCHES —————
Page 82 and 83: APPENDIX ————————
Page 84 and 85: 82 APPENDIX ———————
Page 106 and 107: i APPENDIX ————————
Page 108: English 885-V64/V65/V66/V67 XE8589-
show all

Sewing Machine - Brother

Create successful ePaper yourself

Delete template?

Save as template?