Wolf PDF Cover - Wolf Laboratories

More documents

Recommendations

Info

Leica CM1950 Configuration Europe WOLF LABS Think sustainable Tel: 01759 301142 Fax: 01759 301143 E-mail: sales@wolflabs.co.uk Leica CM1950 Configuration Europe 230V/50 Hz with cryochamber and specimen cooling, deactivable specimen retraction, certified UVC disinfection, AgProtect nanosilver coating, vacuum system and motor for motorized sectioning. with blade holder CE Instrument features: Freestanding cryostat with encapsulated, splash-proof microtome. Spacious, stainlesssteel cryochamber, with antiglare illumination. Easy to clean and disinfect. Heated, removable sliding window. Stable, selfcontained cryocabinet on rollers. Collection container for condensing water at front of instrument. Outer surfaces and controls of instrument coated with AgProtect nanosilver coating to reduce risk of infection. Handwheel manually lockable in two positions. Easy-to-handle and stable clamping system for clamping the specimen discs. 8 ° XY specimen orientation with zero point reference. Specimen retraction for manual mode of operation, (20 m), can be switched off. Motorized modes of operation equipped with self-adjusting retraction system, retraction value depending on sectioning speed. Certified UVC disinfection: 30 and 180minute cycles can be selected. Disinfection can be aborted at any time, if work needs to be resumed immediately. Automatic safety cutoff of disinfection cycle when sliding window is opened. Vacuum system for stretching the sections and for removal of section debris, with saving integrated filter system and bacteria filter on the outside of the instrument. Motorized sectioning, single and continuous stroke. Motorized sectioning operated via control panel or optional foot switch. When motorized sectioning is stopped via the control panel, the handwheel is automatically locked in the bottom position. Safety handwheel can be centered during motorized sectioning. 2 Sectioning speed ranges selectable: 050 strokes per minute or 085 strokes per minute. Vmax button for fast trimming: 85 to 90 strokes per minute. 14
WOLF LABS Think sustainable Twin compressor cooling system for cryochamber and specimen head. Cooling system with safety pressure control. Specimen temperature selectable from -10°C to -50°C in 1 ° steps. Cryochamber temperature selectable from 0°C to • 35 °C,+5K, adjustable in 1K increments at ambient temperature of 20 °C. Tel: 01759 301142 Fax: 01759 301143 E-mail: sales@wolflabs.co.uk Easy to clean, actively cooled specimen preparation zone with quick-freezing shelf for up to 15 specimens (temperature selection down to -42°C) plus 2 Peltier element freezing stations (temperatures down to -52°C) with manual defrost cycle. Cryochamber defrosted via automatic hotgas defrosting once every 24 hours, programmable in 15minute increments. Defrost cycle: 12 minutes. Manual defrosting of cryochamber, quick-freezing shelf with integrated Peltier elements and specimen head with acoustic warning signal to prevent unintentional defrosting. Manual defrost cycle for Chamber and quick-freezing shelf with Peltier elements: 12 minutes for specimen head: 15 minutes. Low-maintenance microtome with cross roller guides. Reproducible high quality thin sections via stepper motor specimen feed. Section thickness selection from outside the cryochamber. Section thickness selection: Trimming thickness range: selectable via key combination when instrument is being switched on. For clinical applications: 4 trimming thickness settings: 10, 20, 30 and 40 m. For research applications: 1600 m: selectable in 1 m steps from 110 m selectable in 2 m steps from 1020 m, selectable in 5 m steps from 2050 m selectable in 10 m steps from 50100 m selectable in 50 m steps from 100600 m. Sectioning thickness range: 1100 m, selectable in 0.5 m steps from 15 m selectable in 1 m steps from 520 m selectable in 5 m steps from 2060 m selectable in 10 m steps from 60100 m. Total vertical specimen stroke: 59 mm Total horizontal specimen feed: 25 mm Motorized coarse feed in 2 speeds: 300 m/s or 900 m/s. Step function: 20 m each time the key is pressed at slow coarse feed speed. Control panel with foil-protected buttons and locking function. Self-explanatory symbols for all essential functions and displays. LEDdisplay for cryochamber and specimen head temperature, actual time, defrost time. Visual indication of specimen stop positions (front/home). 15
Page 1 and 2: Wolf Laboratories Limited www.wolfl
Page 3 and 4: WOLF LABS Think sustainable Tel: 01
Page 5 and 6: Leica CM1950 Configuration Europe W
Page 7: WOLF LABS Think sustainable Technic
Page 11 and 12: WOLF LABS Think sustainable Tel: 01
Page 13 and 14: Leica CM1950 Platform THE cryostats
Page 15 and 16: 4 NEW: CryoZone blade holder and an
Page 17 and 18: Histology laboratorires continue to
Page 19 and 20: 8 Simple specimen identification us
Page 21 and 22: 10 Leica CM1950 Technical Specifica

Wolf PDF Cover - Wolf Laboratories

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?