Pro H50/55-Series Gas Fryers Service and Parts Manual - Frymaster
Pro H50/55-Series Gas Fryers Service and Parts Manual - Frymaster
Pro H50/55-Series Gas Fryers Service and Parts Manual - Frymaster
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. After servicing is complete, reconnect the unit to the gas supply, reattach restraining devices, <strong>and</strong><br />
plug in the electrical cords.<br />
1.3 Cleaning the <strong>Gas</strong> Valve Vent Tube<br />
1. Set the fryer power switch <strong>and</strong> the gas valve to the OFF position.<br />
2. Carefully unscrew the vent tube from the gas valve. NOTE: The vent tube may be straightened<br />
for ease of removal.<br />
3. Pass a piece of binding wire (.052 inch diameter) through the tube to remove any obstruction.<br />
4. Remove the wire <strong>and</strong> blow through the tube to ensure it is clear.<br />
5. Reinstall the tube <strong>and</strong> bend it so that the opening is pointing down.<br />
1.4 Checking the Burner Manifold <strong>Gas</strong> Pressure<br />
1. On non-CE fryers only, ensure that the gas valve knob is in the OFF position.<br />
Honeywell<br />
2. Remove the pressure tap plug from the gas valve assembly.<br />
Typical Non-CE<br />
Valve Assembly<br />
OFF<br />
Pressure Tap Plug<br />
3. Attach a manometer or pressure gauge to the pressure tap hole.<br />
1-5<br />
ON<br />
Typical CE Valve<br />
Assembly
Change language