ik 5000 quadra-chek - heidenhain

More documents

Recommendations

Info

Chapter 5 Tolerancing & Templates 5-4 Step 4 Type in the nominal + and nominal - values for your feature as shown. NOTE Nominal + and - values are the same as the tolerance value for the feature. For example, if a feature has a tolerance of + or - 0.006 inches then the nominal + and nominal - values are 0.006 inches. CAUTION Enter tolerance values in the appropriate units of measurement. For example, if you are measuring in metric (mm) enter tolerance data in metric (mm). Step 5 Click OK in the dialog box. The tolerance result window appears as shown.
Quadra-Chek ® <strong>5000</strong> Pass/ Fail Displays A green pass symbol in the features list indicates the feature is within its tolerances. Red symbols indicate the feature failed one or more tolerances. True position tolerance (circles, points arcs, spheres) Use true position tolerance to specify nominal position and size for a selected feature, specify upper and lower deviation allowed from nominal position and size, and calculate pass/fail results. True position tolerance compares the measured location of a center point (on at least one axis) to the nominal location of that feature's center point and separately compares the size of that feature. True position tolerancing is regardless of size tolerancing. This means that position and size are calculated independently and do produce true position bonuses. To perform a true position tolerance Step 1 Highlight the desired feature in the features list. NOTE Use only a circle, point, arc, or sphere. True position tolerances do not apply to other types of features. Step 2 Click the true position/MMC/LMC button on the tolerance toolbar. 5-5
Page 1:
Operating Instructions IK 5000 QUAD
Page 4 and 5:
Proprietary notice Disclaimer Trade
Page 6 and 7:
Contents Contents-2 Quick uick S SS
Page 8 and 9:
Contents Contents-4 Buffer probe ..
Page 10 and 11:
Contents Contents-6 To palletize mu
Page 12 and 13:
Contents Contents-8 Sample Formula
Page 14 and 15:
Contents Contents-10 Locking the ru
Page 16 and 17:
Contents Contents-12 Dropping in Z
Page 18 and 19:
Contents Contents-14
Page 20 and 21:
Chapter 1 Overview 1-2 It is easy t
Page 22 and 23:
Chapter 1 Overview Icons and Type F
Page 24 and 25:
Chapter 1 Overview Windows and Tool
Page 26 and 27:
Chapter 1 Overview QC-5000 Windows
Page 28 and 29:
Chapter 1 Overview 1-10 Locked/unlo
Page 30 and 31:
Chapter 1 Overview The Part View Wi
Page 32 and 33:
Chapter 1 Overview View Rotator 1-1
Page 34 and 35:
Chapter 1 Overview 1-16 Step 3 Rele
Page 36 and 37:
Chapter 1 Overview Status Bar 1-18
Page 38 and 39:
Chapter 1 Overview 1-20 To delete i
Page 40 and 41:
Chapter 1 Overview Main Menu Bar To
Page 42 and 43:
Chapter 1 Overview 1-24 To place a
Page 44 and 45:
Chapter 1 Overview 1-26 To add butt
Page 46 and 47:
Chapter 1 Overview 1-28 To remove b
Page 48 and 49:
Chapter 1 Overview 1-30
Page 50 and 51:
Chapter 2 Quick Start 2-2 To set ma
Page 52 and 53:
Chapter 2 Quick Start 2-4 Nest temp
Page 54 and 55:
Chapter 2 Quick Start Recording the
Page 56 and 57:
Chapter 2 Quick Start Creating the
Page 58 and 59:
Chapter 2 Quick Start Recording the
Page 60 and 61:
Chapter 2 Quick Start 2-12 Step 5 C
Page 62 and 63:
Page 64 and 65:
Chapter 2 Quick Start 2-16 Step 10
Page 66 and 67:
Chapter 2 Quick Start 2-18 To selec
Page 68 and 69:
Chapter 2 Quick Start 2-20 Step 3 P
Page 70 and 71:
Chapter 2 Quick Start 2-22 To creat
Page 72 and 73:
Chapter 2 Quick Start 2-24 Step 5 M
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Chapter 2 Quick Start Save the Refe
Page 80 and 81:
Chapter 2 Quick Start Touch Probe M
Page 82 and 83:
Chapter 2 Quick Start 2-34 Step 4 P
Page 84 and 85:
Chapter 2 Quick Start Measuring 3-D
Page 86 and 87:
Chapter 2 Quick Start 2-38 To measu
Page 88 and 89:
Page 90 and 91:
Chapter 2 Quick Start 2-42 Step 6 I
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Chapter 2 Quick Start 2-52 The plan
Page 102 and 103:
Chapter 2 Quick Start 2-54 Step 3 S
Page 104 and 105:
Page 106 and 107:
Chapter 2 Quick Start 2-58 The circ
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Chapter 2 Quick Start 2-64 To const
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Chapter 2 Quick Start 2-78 Step 9 R
Page 128 and 129:
Chapter 2 Quick Start 2-80 Measurem
Page 130 and 131:
Chapter 2 Quick Start 2-82 The refe
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Chapter 2 Quick Start 2-88 To selec
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Chapter 2 Quick Start 2-94 Step 3 D
Page 144 and 145:
Chapter 2 Quick Start 2-96 The tole
Page 146 and 147:
Chapter 2 Quick Start 2-98 Step 4 E
Page 148 and 149:
Chapter 2 Quick Start 2-100 To perf
Page 150 and 151:
Chapter 2 Quick Start 2-102 To open
Page 152 and 153:
Chapter 2 Quick Start 2-104 To modi
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Chapter 2 Quick Start 2-112 The dat
Page 162 and 163:
Page 164 and 165:
Chapter 2 Quick Start 2-116 To expo
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Chapter 2 Quick Start 2-122 To comp
Page 172 and 173:
Chapter 2 Quick Start 2-124 The pro
Page 174 and 175:
Chapter 3 Probes 3-2 Step3 Click th
Page 176 and 177:
Chapter 3 Probes 3-4 The magnificat
Page 178 and 179:
Chapter 3 Probes 3-6 Step 3 Type th
Page 180 and 181:
Chapter 3 Probes 3-8 Step 2 Click o
Page 182 and 183:
Chapter 3 Probes 3-10 Step 8 Click
Page 184 and 185:
Chapter 3 Probes 3-12 After perform
Page 186 and 187:
Chapter 3 Probes 3-14 Step 5 Select
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Chapter 3 Probes 3-20 To perform a
Page 194 and 195:
Chapter 3 Probes 3-22 Step 6 Turn o
Page 196 and 197:
Chapter 3 Probes 3-24 Step 10 Use t
Page 198 and 199:
Page 200 and 201:
Chapter 3 Probes 3-28 Step 2 Center
Page 202 and 203:
Page 204 and 205:
Chapter 3 Probes 3-32 The QC-5000 a
Page 206 and 207:
Chapter 3 Probes VED Probes 3-34 Us
Page 208 and 209:
Chapter 3 Probes 3-36 Hand cursors
Page 210 and 211:
Chapter 3 Probes 3-38 To re-size a
Page 212 and 213:
Chapter 3 Probes 3-40 To rotate a p
Page 214 and 215:
Chapter 3 Probes 3-42 Simple probe
Page 216 and 217:
Chapter 3 Probes 3-44 Circle probe
Page 218 and 219:
Chapter 3 Probes 3-46 Buffer probe
Page 220 and 221:
Chapter 3 Probes 3-48 Average probe
Page 222 and 223:
Chapter 3 Probes 3-50 Width probe U
Page 224 and 225:
Chapter 3 Probes 3-52 Select the Ne
Page 226 and 227:
Chapter 3 Probes 3-54 Selecting the
Page 228 and 229:
Chapter 3 Probes 3-56 Separate the
Page 230 and 231:
Chapter 3 Probes Edge Teaching 3-58
Page 232 and 233:
Page 234 and 235:
Chapter 3 Probes 3-62 Step 5 Select
Page 236 and 237:
Chapter 3 Probes Probe Library Prob
Page 238 and 239:
Chapter 3 Probes 3-66 To create a n
Page 240 and 241:
Chapter 3 Probes Probe Calibration
Page 242 and 243:
Page 244 and 245:
Chapter 3 Probes 3-72 To teach (qua
Page 246 and 247:
Chapter 3 Probes 3-74 Qualification
Page 248 and 249:
Chapter 3 Probes 3-76 The reference
Page 250 and 251:
Chapter 3 Probes 3-78 Step 7 Probe
Page 252 and 253:
Page 254 and 255:
Chapter 3 Probes Using a Probe Rack
Page 256 and 257:
Chapter 3 Probes 3-84 +Y Orientatio
Page 258 and 259:
Chapter 3 Probes 3-86 -Y Orientatio
Page 260 and 261:
Chapter 3 Probes 3-88 Port position
Page 262 and 263:
Page 264 and 265:
Chapter 3 Probes 3-92 Step 2 Highli
Page 266 and 267:
Page 268 and 269:
Chapter 3 Probes 3-96 The probe rac
Page 270 and 271:
Page 272 and 273:
Chapter 3 Probes 3-100
Page 274 and 275:
Chapter 4 Programming The Program T
Page 276 and 277:
Chapter 4 Programming 4-4 Step 4 Cl
Page 278 and 279:
Chapter 4 Programming Running A Pro
Page 280 and 281:
Chapter 4 Programming 4-8 To record
Page 282 and 283:
Chapter 4 Programming 4-10 To displ
Page 284 and 285:
Chapter 4 Programming 4-12 To inser
Page 286 and 287:
Chapter 4 Programming 4-14 Step 6 P
Page 288 and 289:
Chapter 4 Programming 4-16 Use clea
Page 290 and 291:
Chapter 4 Programming 4-18 Step 6 C
Page 292 and 293:
Chapter 4 Programming 4-20 To creat
Page 294 and 295:
Chapter 4 Programming 4-22 Step 4 D
Page 296 and 297:
Chapter 4 Programming 4-24 Step 3 P
Page 298 and 299:
Chapter 4 Programming 4-26 Step 7 R
Page 300 and 301:
Chapter 4 Programming 4-28 Step 11
Page 302 and 303:
Chapter 4 Programming 4-30 To creat
Page 304 and 305:
Chapter 4 Programming 4-32 To measu
Page 306 and 307:
Chapter 4 Programming 4-34 Move cir
Page 308 and 309:
Chapter 4 Programming 4-36 The dist
Page 310 and 311:
Chapter 4 Programming 4-38 To run a
Page 312 and 313:
Chapter 4 Programming 4-40 Fixturin
Page 314 and 315: Chapter 4 Programming Initial Setti
Page 316 and 317: Chapter 4 Programming Editing Progr
Page 318 and 319: Chapter 4 Programming 4-46 To edit
Page 320 and 321: Chapter 4 Programming 4-48 To chang
Page 322 and 323: Chapter 4 Programming Creating User
Page 324 and 325: Chapter 4 Programming 4-52 Step 2 C
Page 330 and 331: Chapter 4 Programming 4-58 Step 8 S
Page 332 and 333: Chapter 4 Programming 4-60 Palletiz
Page 338 and 339: Chapter 4 Programming 4-66 The QC-5
Page 342 and 343: Chapter 4 Programming 4-70 Step 7 E
Page 344 and 345: Chapter 4 Programming Expanding the
Page 346 and 347: Chapter 4 Programming Program Toolb
Page 348 and 349: Chapter 4 Programming 4-76 To add b
Page 350 and 351: Chapter 4 Programming 4-78 To delet
Page 352 and 353: Chapter 4 Programming Conditional S
Page 354 and 355: Chapter 4 Programming 4-82 If-Goto
Page 356 and 357: Chapter 4 Programming 4-84 Else Sta
Page 358 and 359: Chapter 4 Programming 4-86 Test con
Page 360 and 361: Chapter 4 Programming 4-88
Page 362 and 363: Chapter 5 Tolerancing & Templates 5
Page 398 and 399: Chapter 5 Tolerancing & Templates T
Page 404 and 405: Chapter 5 Tolerancing & Templates R
Page 414 and 415:
Chapter 5 Tolerancing & Templates O
Page 416 and 417:
Chapter 5 Tolerancing & Templates 5
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Chapter 5 Tolerancing & Templates F
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Chapter 5 Tolerancing & Templates C
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Chapter 6 System Setup 6 - 2 Encode
Page 454 and 455:
Chapter 6 System Setup 6 - 4 3 Cont
Page 456 and 457:
Chapter 6 System Setup Colors scree
Page 458 and 459:
Chapter 6 System Setup 6 - 8 Dark e
Page 460 and 461:
Chapter 6 System Setup 6 - 10 Part
Page 462 and 463:
Chapter 6 System Setup 6 - 12 New q
Page 464 and 465:
Chapter 6 System Setup Misc screen
Page 466 and 467:
Chapter 6 System Setup A following
Page 468 and 469:
Chapter 6 System Setup Toolbars scr
Page 470 and 471:
Chapter 6 System Setup With raised
Page 472 and 473:
Chapter 6 System Setup 6 - 22 5 The
Page 474 and 475:
Chapter 6 System Setup Specifying t
Page 476 and 477:
Chapter 6 System Setup Specifying p
Page 478 and 479:
Chapter 6 System Setup Calibrating
Page 480 and 481:
Chapter 6 System Setup Allow crossh
Page 482 and 483:
Chapter 6 System Setup Specifying v
Page 484 and 485:
Chapter 6 System Setup FOV spherica
Page 486 and 487:
Chapter 6 System Setup Probes scree
Page 488 and 489:
Chapter 6 System Setup Specifying i
Page 490 and 491:
Chapter 6 System Setup Including li
Page 492 and 493:
Page 494 and 495:
Chapter 6 System Setup Showing prog
Page 496 and 497:
Chapter 6 System Setup Sounds scree
Page 498 and 499:
Chapter 6 System Setup Locking resu
Page 500 and 501:
Chapter 6 System Setup Specifying d
Page 502 and 503:
Chapter 6 System Setup Specifying t
Page 504 and 505:
Page 506 and 507:
Chapter 6 System Setup Zooming to v
Page 508 and 509:
Chapter 6 System Setup 6 - 58 Step
Page 510 and 511:
Chapter 6 System Setup Highlighting
Page 512 and 513:
Chapter 6 System Setup Displaying 3
Page 514 and 515:
Chapter 6 System Setup Level-based
Page 516 and 517:
Chapter 6 System Setup 6 - 66 Speed
Page 518 and 519:
Chapter 6 System Setup Displaying t
Page 520 and 521:
Chapter 6 System Setup Specifying e
Page 522 and 523:
Chapter 6 System Setup File types 6
Page 524 and 525:
Chapter 6 System Setup General scre
Page 526 and 527:
Chapter 6 System Setup Moving the d
Page 528 and 529:
Chapter 6 System Setup 6 - 78 Click
Page 530 and 531:
Chapter 6 System Setup Sharing axes
Page 532 and 533:
Chapter 6 System Setup Specifying n
Page 534 and 535:
Chapter 6 System Setup Specifying X
Page 536 and 537:
Chapter 6 System Setup Probe Rack S
Page 538 and 539:
Chapter 6 System Setup Probe Rack C
Page 540 and 541:
Chapter 6 System Setup 6 - 90 Runni
Page 542 and 543:
Chapter 6 System Setup 6 - 92 3 Cli
Page 544 and 545:
Chapter 6 System Setup 6 - 94 7 You
Page 546 and 547:
Appendix A Profile measurement Oper
Page 548 and 549:
Appendix A Profile measurement Cond
Page 550 and 551:
Appendix A Profile measurement A-6
Page 552 and 553:
Appendix A Profile measurement Meas
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Appendix A Profile measurement Meas
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Index Cone 2-38 Configuring analog
Page 574 and 575:
Index J Joystick 6-63 Joystick cali
Page 576 and 577:
Index Probe indicator 6-54 Probe li
Page 578 and 579:
Index Turn off high accuracy mode 4
show all

ik 5000 quadra-chek - heidenhain

Create successful ePaper yourself

Delete template?

Save as template?