Norton Construction Product Catalog - Dynatech

More documents

Recommendations

Info

18 WALK BEHIND Fully Enclosed Blade Shaft Protects component parts Less damage prone WALK BEHIND 61HP Turbo-Charged Deutz Motor Powerful for deep sawing Optimizes a straighter cut 61HP TURBO DIESEL FLAT SAWS Marine Grade Instrument Panel Withstands outdoor weather conditions Fault indicators for shut down warnings Free-Wheel Transmission Easier maneuverability Better operator control Recommended Blade Charger Large Diameter See page 31 Our largest flat saw with rugged raw power to move sure and steady with ample power to finish any sized job. Available in 20”-36” blade guards and up to 48” with the optional jackshaft, they are designed for joint-cutting green or cured concrete or asphalt sawing. Equipped with a 61HP Deutz turbo-charged, 3 cylinder, air-cooled diesel engine, this machine delivers long, maintenance-free hours of operation. The heavyduty, reinforced, jig-welded, rigid box frame resists twisting and makes it one of the strongest machines in the market. Finished off with a clean, simple design with standard features such as a full instrument panel, free-wheeling neutral, rain-capped muffler and fully enclosed 2” blade shaft with self-aligning bearings. www.nortonconstructionproducts.com
61HP TURBO DIESEL FLAT SAWS TECHNICAL SPECIFICATIONS C6120 C6126 C6130 C6136 C6136JS C6148JS <strong>Product</strong> Number 701846 26477 8 701846 26478 5 701846 25960 6 701846 26479 2 701846 26480 8 701846 26481 5 Blade Guard Capacity – in. (mm) 20" (508) 26" (660) 30" (762) 36" (914) 36" (914) 48" (1219) Maximum Depth of Cut – in. (mm) 8-5/8" (219) 10-5/8" (270) 12-5/8" (321) 14-5/8" (371) 14-5/8" (371) 20" (508) Arbor Size – in. (mm) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) 1" (25.4) Blade Flange Diameter – in. (mm) 4-1/2" (114) 4-1/2" (114) 6" (152) 6" (152) 6" (152) 6" (152) Blade Shaft RPM 2,560 2,469 2,194 1,340 1,340 800 Blade Shaft Diameter – in. (mm) 2" (50.8) Blade Shaft Bearings Heavy Duty Self Aligning Pillow Base Blade Shaft Drive 2 Five Groove Powerbands Blade Guard Attachment Hinged, All Steel Blade Control Electro-Hydraulic Axle – Front – in. (mm) 1" (25.4) Axle – Rear – in. (mm) 1-1/4" (32) Wheels – Front D x W x B – in. (mm) 8"x3"x1" (26x76x25.4) Wheels – Rear D x W x B – in. (mm) 10"x3"x1-1/4" (254x76x31.7) Transmission Eaton hydrostatic transmission with infinite adjustable forward, and reverse with neutral/free-wheel position. Transmission uses heavy duty chain/sprocket and pinion/gear for final speed reduction and is capable of a maximum travel speed of 220 SFPM Control Forward/Reverse Control and Engage/Disengage Levers Speed 0-300 SFPM Chassis Heavy duty jig-welded box frame made of ¼" plate with internal reinforcement gussets. Power Source Diesel Turbo Charged Engine Type Deutz BF3L2011 Specifications 7482 Maximum Horsepower 61 HP (45.5kw) – data provided by engine manufacturer Displacement – cu. In. (i) 142.2 in.³ (2,331 cm³) Bore – in. (mm) 3.7" (94) Stroke – in. (mm) 4.4" (112) Cylinders/Cycle Three Cylinder Turbo Diesel Fuel Capacity – gal. (l) 9 gal. (34 l) Oil Capacity – qt. (l) 8.45 qt. (8 l) Air Filter Three Stage Sy-Klone Starter Electric Engine Cooling Forced Air/Oil SAW DIMENSIONS Height 55" (1,397) 55" (1,397) 55" (1,397) 55" (1,397) 55" (1,397) 55" (1,397) Minimum Saw Length (Transport) – in. (mm) 58" (1,473) 58" (1,473) 58" (1,473) 58" (1,473) 77-3/4" (1,975) 77-3/4" (1,975) Maximum Saw Length (Working) – in. (mm) 164" (4,167) 164" (4,167) 164" (4,167) 164" (4,167) 183-3/4" (4,667) 183-3/4" (4,667) Maximum Pointer Length – in. (mm) 82-1/4" (2,089) 82-1/4" (2,089) 82-1/4" (2,089) 82-1/4" (2,089) 82-1/4" (2,089) 82-1/4" (2,089) Frame Width – in. (mm) 31-3/8" (797) 31-3/8" (797) 31-3/8" (797) 31-3/8" (797) 31-3/8" (797) 31-3/8" (797) Saw Width – in. (mm) 39-3/4" (1,010) 39-3/4" (1,010) 39-3/4" (1,010) 39-3/4" (1,010) 39-3/4" (1,010) 39-3/4" (1,010) Front (Outside to Outside Wheel Width) – in. (mm) 29-1/2" (749) 29-1/2" (749) 29-1/2" (749) 29-1/2" (749) 29-1/2" (749) 29-1/2" (749) Rear (Outside to Outside Wheel Width) – in. (mm) 31" (787) 31" (787) 31" (787) 31" (787) 31" (787) 31" (787) Blade to Wall – in. (mm) 2-19/32" (66) 2-19/32" (66) 2-19/32" (66) 2-19/32" (66) 2-19/32" (66) 2-19/32" (66) Wheel Base Length – in. (mm) 10-1/2" (267) 10-1/2" (267) 10-1/2" (267) 10-1/2" (267) 10-1/2" (267) 10-1/2" (267) Blade Shaft Maximum Height 20-1/2" (521) 20-1/2" (521) 20-1/2" (521) 20-1/2" (521) 49" (1245) 49" (1245) Weight Crated lbs. – lbs (kg) 1,590 lbs (721 kg) 1,590 lbs (721 kg) 1,590 lbs (721 kg) 1,590 lbs (721 kg) 2,221 lbs (1,008 kg) 2,221 lbs (1,008 kg) Weight Uncrated – lbs (kg) 1,540 lbs (700 kg) 1,540 lbs (700 kg) 1,540 lbs (700 kg) 1,540 lbs (700 kg) 2,171 lbs (985 kg) 2,171 lbs (985 kg) ACCESSORIES Light kit with magnetic base 701846 26513 3 Water pump kit 701846 26502 7 19 WALK BEHIND
Page 1 and 2: DIAMOND, ABRASIVES AND EQUIPMENT FO
Page 3 and 4: SAINT-GOBAIN IS COMMITTED TO BEING
Page 5 and 6: CATALOG NAVIGATION Easy to Follow P
Page 7 and 8: High Speed Diamond Blades for High
Page 9 and 10: DIAMOND BLADES Reinforced Concrete
Page 11 and 12: DIAMOND BLADES General Purpose, All
Page 13 and 14: DIAMOND BLADES General Purpose and
Page 15 and 16: ABRASIVE BLADES General Purpose and
Page 17: Walk Behind Diesel Flat Saws 18 Sel
Page 21 and 22: 31HP DIESEL FLAT SAWS TECHNICAL SPE
Page 23 and 24: 20HP SELF-PROPELLED FLAT SAWS TECHN
Page 25 and 26: 13HP SELF-PROPELLED FLAT SAWS TECHN
Page 27 and 28: 13HP PUSH FLAT SAWS TECHNICAL SPECI
Page 29 and 30: EARLY ENTRY/GREEN CONCRETE SAWS TEC
Page 35 and 36: DIAMOND BLADES Asphalt and Abrasive
Page 39 and 40: ABRASIVE BLADES Reinforced Concrete
Page 41 and 42: Masonry Large Masonry Saws 42 Compa
Page 43 and 44: BBL BLOCKBUSTER LARGE MASONRY SAWS
Page 45 and 46: BBC BLOCKBUSTER COMPACT MASONRY SAW
Page 47 and 48: BBM BLOCKBUSTER MINI MASONRY SAWS T
Page 53 and 54: DIAMOND BLADES Natural Stone and Ti
Page 55 and 56: Tile Stationary Tile Saws 56 Hand-H
Page 57 and 58: CTC1020XL TILE SAW TECHNICAL SPECIF
Page 59 and 60: CTC705E TILE SAW TECHNICAL SPECIFIC
Page 61 and 62: TC405 HAND-HELD TILE SAW This is th
Page 63 and 64: RAIL SAWS TECHNICAL SPECIFICATIONS
Page 65 and 66: DIAMOND BLADES Natural Stone and Ti
Page 69 and 70:
Portable Hand-Held Diamond Blades f
Page 71 and 72:
DIAMOND BLADES General Purpose and
Page 73 and 74:
DIAMOND BLADES Natural Stone and Ti
Page 75 and 76:
DIAMOND BLADES Asphalt and Abrasive
Page 77 and 78:
CUP WHEELS General Purpose and Maso
Page 79 and 80:
WIRE BRUSHES WARNING CUP BRUSHES -
Page 81 and 82:
WIRE BRUSHES WHEEL BRUSHES - STAINL
Page 83 and 84:
ABRASIVE DISCS ABRASIVE FLAP DISCS
Page 85 and 86:
ABRASIVE BLADES DEPRESSED CENTER WH
Page 87 and 88:
ABRASIVE BLADES CUT-OFF BLADES CHAR
Page 89 and 90:
ABRASIVE BLADES CHOP SAW BLADES GEM
Page 91 and 92:
ABRASIVE BELTS PORTABLE BELTS ALUMI
Page 93 and 94:
Core Drill Stationary Core Drill Ri
Page 95 and 96:
DR520 AND DR620 CORE DRILL RIGS TEC
Page 97 and 98:
DR320 AND DR424 CORE DRILL RIGS TEC
Page 99 and 100:
HHDET1800 CORE DRILL A light-weight
Page 101 and 102:
HHDETOL HAND HELD CORE DRILL Weighi
Page 103 and 104:
BITS Reinforced Concrete and Harder
Page 105 and 106:
BITS Asphalt and Abrasive Materials
Page 107 and 108:
Floor Care Concrete Floor Grinders
Page 109 and 110:
CG435 FLOOR GRINDER/POLISHER The fl
Page 111 and 112:
DIAMOND POLISHING TOOLS METAL BONDE
Page 113 and 114:
DIAMOND POLISHING TOOLS FLOOR DIAMO
Page 115 and 116:
COATED ABRASIVES FLOOR SANDING SHEE
Page 117 and 118:
COATED ABRASIVES LARGE DIAMETER DIS
Page 119 and 120:
COATED ABRASIVES EDGER DISCS PAPER
Page 121 and 122:
COATED ABRASIVES SCREEN DISCS SCREE
Page 123 and 124:
NON-WOVEN ABRASIVES FLOOR MAINTENAN
Page 125 and 126:
Short Peg Rack Holds 4", 4-1/2", 5"
Page 127 and 128:
OPERATING SPEEDS / EXTENSION CORD R
Page 129 and 130:
DIAMOND BLADE APPLICATION GUIDE ANG
Page 131 and 132:
HISTORY. TRADITION. ULTIMATE PRODUC
show all

Norton Construction Product Catalog - Dynatech

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?