Norton Construction Product Catalog - Dynatech

CTC705E TILE SAW
TECHNICAL SPECIFICATIONS CTC705E
Product Number 701846 21976 1
Blade Guard Capacity – in. (mm) 7" (177)
Maximum Depth of Cut – in. (mm) 2-1/4" (57)
Arbor Size – in. (mm) 5/8"
Blade Flange Diameter – in. (mm) 3 (78)
Blade Shaft RPM 6,000
Maximum Material Size – in. (mm) 18" x 18"
Rip Cut Size – in. (mm) 18" (457)
Diagonal Size – in. (mm) 12" (305)
Cut Depth – in. (mm) 1-7/8" (48)
Cutting Head Cast Aluminum
Built-In 45° Miter Cut NO, Includes Miter Block
Cutting Table Aluminum
Water Pump YES
Power Source Electric
Motor/Engine Type Brush Motor with Thermal Protection
Maximum Horsepower* 1-1/2 HP
Voltage 115 volt
Cycle*/Current/Phase 60 Hz/AC/1
Full Load Amps 4 Amp
Starting Amps 6 Amp
SAW DIMENSIONS
Saw Length – in. (mm) 29-39/64" (752)
Saw Width – in. (mm) 18-3/4" (475)
Saw Height – in. (mm) 13-3/4" (350)
Saw Height With Stand – in. (mm) 44-7/8" (1140)
Arbor to Top of Cart – in. (mm) 3-3/8" (85)
Cart (Table) Length – in. (mm) 14-3/8" (365)
Cart (Table) Width – in. (mm) 14-1/2" (369)
Cart Travel – in. (mm) 19-7/8" (505)
Pan Length – in. (mm) 29-39/64" (752)
Pan Width – in. (mm) 18-3/4" (475)
Weight Crated – lbs (kg) 42 lbs (19 kg)
Weight Uncrated – lbs (kg) 32 lb (14.5 kg)
*= DATA PROVIDED BY ENGINE MANUFACTURER
GENUINE NORTON DIAMOND BLADE INCLUDED WITH SAW.
ALL THE MUSCLE YOU NEED.
59
TILE