Norton Construction Product Catalog - Dynatech

TC405 HAND-HELD TILE SAW
This is the portable solution for dry or wet cutting on smaller jobs.
The 115 volt, single phase motor provides all the power you need
combined with a built-in miter and depth adjustment to produce
clean, accurate cuts every time.
Recommended Blade Upgrade
Norton Classic Continuous Rim
See page 65
Wet Cut Kits
Easy attaching water control
TECHNICAL SPECIFICATIONS TC405
Product Number 701846 82709 6
Blade Guard Capacity – in. (mm) 5" (127)
Maximum Depth of Cut – in. (mm) 1-1/4" (31)
Arbor Size – in. (mm) 20mm
Blade Flange Diameter – in. (mm) 1.41 (36)
Blade Shaft RPM 12,000
Cut Depth – in. (mm) 1-3/16" (30)
Built-In 45° Miter Cut YES
Power Source Electric
Motor/Engine Type Universal Brush
Maximum Horsepower* 3/4 HP
Voltage 115 volt
Cycle*/Current/Phase 60 Hz/AC/1
Full Load Amps 5 Amp
Starting Amps 8 Amp
SAW DIMENSIONS
Saw Length – in. (mm) 9-3/8" (238)
Saw Width – in. (mm) 7-7/8" (200)
Saw Height – in. (mm) 6-1/2" (165)
Weight Crated – lbs (kg) 8 lbs (3.6 kg)
Weight Uncrated – lbs (kg) 6.4 lb (2.9 kg)
*= DATA PROVIDED BY MOTOR MANUFACTURER
GENUINE NORTON DIAMOND BLADE (3 QTY) INCLUDED WITH SAW.
1/2HP for Ample Cutting
Powerful clean cuts in hard materials
Built-in Miter Cut Capability
Simple tilting miter table for cutting
up to 45º
61
TILE