Norton Construction Product Catalog - Dynatech

DIAMOND BLADES
Natural Stone and Tiles
Ceramic and stone tiles, granite, marble, very hard bricks and other very hard and dense materials.
WET – CONTINUOUS RIM
SLICER
Premium Performance. Razor like cut, but with high tensile strength steel core for greater accuracy and less wobbling.
V-shaped gullet enhances cutting speed and improves blade life, particularly in hard materials. Smoothest cut with the
best finish.
UPC PART # SIZE MAX RPM SEGMENT SPEC
701846 84183 2 NXSLC0700 7 x .060 x 5/8 8730 .393"
701846 84184 9 NXSLC0800 8 x .060 x 5/8 7640 .393"
701846 84185 6 NXSLC1000 10 x .060 x 5/8 6115 .393"
SLICER GLASS
Utilizes all the core characteristics of the original Slicer and blends in a special bond to allow virtually chip-free
cutting time and time again. The ultra thin blade is best suited for cutting glass, it also performs well on critically
hard materials.
UPC PART # SIZE MAX RPM SEGMENT SPEC
701846 84533 5 SLSGLS0700 7 x .060 x 7/8 8730 .275"
NORTON CLASSIC
Excellent quality with good performance in general purpose materials. The right bond and diamond content allows
clean cutting with long use. Well suited for softer tile or stone materials on low horsepower tile saws.
UPC PART # SIZE MAX RPM SEGMENT SPEC
076607 01196 1 CON6WT 6 x .065 x 5/8 10185 .393"
701846 84017 0 CON7WT 7 x .065 x 5/8 8730 .393"
076607 02785 6 CON8WT 8 x .070 x 5/8 7640 .393"
076607 02784 9 CON10WT 10 x .070 x 5/8 6115 .393"
DRY – CONTINUOUS RIM
SLICER MARBLE
Electroplated diamond blade. The specific manufacturing process allows the smoothest cut in hard materials. The
drop-down diamond inserts on the steel center clean the cutting profile to ensure the best quality of cut on marble
and other natural stone.
UPC PART # SIZE MAX RPM SEGMENT SPEC
701846 84528 1 SLSMAR0450 4-1/2 x .040 x 7/8 13300 .275"
701846 84529 8 SLSMAR0500 5 x .040 x 7/8 12000 .275"
701846 84530 4 SLSMAR0700 7 x .060 x 7/8 8730 .275"
NORTON CLASSIC
An economical solution for small to medium size jobs cutting softer ceramic tile and stone materials with efficient
cutting ability.
UPC PART # SIZE MAX RPM SEGMENT SPEC
076607 02793 1 CON4DT 4 x .080 x 7/8-5/8-20mm 15000 .275"
076607 01194 7 NEW CON45DT 4-1/2 x .080 x 7/8-5/8-20mm 13300 .275"
076607 02788 7 CON7DT 7 x .090 x DM-7/8-5/8 8730 .275"
VALUPLUS
A value price point for small to medium size jobs cutting standard ceramic tile with efficient cutting on low
horsepower tile saws.
UPC PART # SIZE MAX RPM SEGMENT SPEC
701846 84087 3 VPDT0400 4 x .080 x 7/8-5/8-20mm 15000 .275"
701846 84088 0 VPDT0450 4-1/2 x .080 x 7/8-5/8-20mm 13300 .275"
701846 84089 7 VPDT0700 7 x .090 x DM-7/8-5/8 8730 .275"
65
TILE