Norton Construction Product Catalog - Dynatech

88
PORTABLE HAND-HELD
PORTABLE HAND-HELD ABRASIVE BLADES
CUT-OFF BLADES – SMALL DIAMETER
GEMINI – ALUMINUM OXIDE
Reinforced cut-off blades with free cutting characteristics on hard materials.
UPC PART # SIZE MAX RPM STD. PKG.
662435 37270 3 CO303514GLL 3 x .035 x 1/4 25465 25
662435 37271 0 CO303538GLL 3 x .035 x 3/8 25465 25
662435 10645 2 CO311614GFC 3 x 1/16 x 1/4 25465 25
662435 10647 6 CO311638GFC 3 x 1/16 x 3/8 25465 25
662435 10650 6 CO31838GFC 3 x 1/8 x 1/4 25465 25
662435 10651 3 CO31838GLL 3 x 1/8 x 3/8 25465 25
662435 37273 4 CO403538GLL 4 x .035 x 3/8 19100 25
662435 10654 4 CO411614GFC 4 x 1/16 x 1/4 19100 25
662435 10655 1 CO411638GFC 4 x 1/16 x 3/8 19100 25
662435 10658 2 CO41814GFC 4 x 1/8 x 1/4 19100 25
662435 10659 9 CO41838GFC 4 x 1/8 x 3/8 19100 25
METAL – ALUMINUM OXIDE
For metal cutting with traditional aluminum oxide design. Packaged 5 per pack.
UPC PART # SIZE MAX RPM STD. PKG.
076607 47767 5 47767 3 x 1/16 x 3/8 25465 5
ACCESSORY FOR CUT-OFF BLADES
MANDREL
For 3" cut-off blades.
UPC PART # DESCRIPTION STD. PKG.
076607 47769 9 47769 Accessory 5
CIRCULAR SAW BLADES
METAL – ALUMINUM OXIDE
Standard grade with good performance and life when cutting metal.
UPC PART # SIZE MAX RPM STD. PKG.
076607 89097 9 89097 7 x 1/8 x DM 8730 25
076607 89096 2 89096 8 x 1/8 x DM 7640 10
MASONRY – SILICON CARBIDE
Standard silicon carbide with good performance when cutting brick, block, concrete and other masonry materials.
UPC PART # SIZE MAX RPM STD. PKG.
076607 89088 7 89088 7 x 1/8 x DM 8730 25
076607 89086 3 89086 8 x 1/8 x DM 7640 10
www.nortonconstructionproducts.com