Lighting controls

PHL-H11_INT.QXD 16-07-2004 10:44 Pagina 11.16
Lighting controls Lightmaster
Product ID Weight
European Order
(kg)
Code (EOC)
LBC5000/00 SOFTW A62PC+SOFTW 4.00 53552400
LBC5001/02 SOFTW CARD+SOFTW 0.15 53734400
LFC5255/00 NETWK AREA CONTR 2.44 53932400
11.16 LIGHTING CONTROLS
Dimensions in mm
LRH5300/50 CONTR BASE ASSY PLUG 1.26 53422000
LLC5319/50 CONTR 9X4 PLUG SW&RE 1.71 53460200
LLC5319/70 CONTR 9X4 PLUG SW&RE D-NO 1.00 53710800
LLC5319/71 CONTR 9X4 PLUG SW&RE D-LIM 1.80 53762700
LLC5359/50 CONTR 9X4 PLUG SW&RE RC5 1.71 53930000
~LIGHTM~Lightmaster
LBC5000/00
Central Supervisor. IBM compatible PC with
software and interface card, user interface to the
LM100 system. A Central Supervisor can control up
to 60 Area Controllers.
Also available:
LBC5001/02 Interface Card and LightManager
Software to be used with a PC provided by the
client.
LFC5255/00
Area Controller. A building controlled by a LM100
system is split into a number of areas. Each area is
supervised with an Area Controller.The Area
Controller manages network traffic, schedules time
commands and implements re-configuration
commands from the Central Supervisor.
LRH5300/50
Base to be used with LLC5319 Lighting Control
Modules.
LLC5319
Pluggable Lighting Control Module with 4 inputs and
9 outputs (Wieland GST). Each output can be
configured to control any light or combination of
lights anywhere on the system. Each individual
output is allowed to switch up to 4 A, with a
maximum for all outputs up to 10 A divided over
the two sides, each 5 A. Requires the LRH5300/50
base to be mounted on.
Versions available:
LLC5319/50 Pluggable LCM (1-10V).
LLC5319/70 Pluggable LCM for use with DALI
ballasts (no feedback).
LLC5319/71 Pluggable LCM for use with DALI
ballasts (limited feedback).
LLC5359/50 Pluggable LCM (1-10V) for use with
RC5 IR remote control.