Lighting controls

PHL-H11_INT.QXD 16-07-2004 10:45 Pagina 11.31
Lighting controls Scenio system
Dimensions in mm
Product ID Weight
(kg)
European Order
Code (EOC)
LRC1555/00 CONTR 1X1 0.35 51653000
LRC1505/00 CONTR 1X0 EXTENSION 0.35 51651600
IRT8020/00 TRANSM IR SCENIO 0.22 51761200
~TRIOS~Trios system
LRC1555/00
Scenio light controller with two modular sockets:
one dedicated for sensors (IR receivers and/or
movement detectors) and the other for businterconnection
to the extension modules LRC1505.
Up to three IR receivers and three movement
detectors can be connected to the sensor input.
The unit has one output channel suitable to switch a
maximum load of 1150 VA, and a 1-10 V DC
regulation output.
LRC1505/00
Scenio extension module to be linked to the light
controller LRC1555 via a communication bus line. It
has two modular sockets, both intended for bus
loop-through connections. Sensors (IR receivers,
movement detectors) cannot be connected to this
unit.The unit has one output channel suitable to
switch a maximum load of 1150 VA, and a 1-10 V
DC regulating output. A 20 cm busline
interconnection cable is supplied with the unit.
IRT8020/00
Eight-preset hand-held transmitter, suitable for
infrared control of Scenio applications. It has 4 keys
for presets and one key for “all off”. Keys for
individual control and preset programming are
located under a hinged cover at the bottom of the
transmitter. In “teach mode” the transmitter can be
used as a commissioning tool for Scenio.The group
address selector switch is contained in the battery
compartment.The unit is supplied complete with
wall holder and batteries.
LIGHTING CONTROLS 11.31