Lighting controls

More documents

Recommendations

Info

PHL-H11_INT.QXD 16-07-2004 10:45 Pagina 11.34 Lighting controls General purpose components 11.34 LIGHTING CONTROLS Dimensions in mm Product ID Weight (kg) European Order Code (EOC) LRM8114/00 SENSOR MOV DET 0.07 51906700 LRI8134/00 SENSOR MULTISENSOR 0.07 51904300 LRM8115/00 SENSR MOV DET LONG 0.07 51722300 LRM8116/00 SENSR MOV DET WIDE 0.07 51841100 LRM8114/00 Compact advanced movement detector that features variable delay-to-off via DIP switch and can be part shaded to limit coverage.The sensor is powered via the additional modular plug-in (RJ12) connector cable that attaches it to a lighting controller.The sensor is suitable for both recessed and surface mounting. Mounting height is between 2.5 m and 3.5 m. LRI8134/00 Compact multi-sensor combining advanced internal light sensor, movement detector and infra-red receiver.The unit features individual element selection, variable delay-to-off via DIP switch and auto-calibrating light sensor. Movement detector can be part shaded to limit coverage.The sensor is powered via the additional modular plug-in (RJ12) connector cable that attaches it to a lighting controller.The sensor is suitable for both recessed and surface mounting. Mounting height is between 2.5 m and 3.5 m. LRM8115/00 Wall-mounted passive infrared movement detector for energy saving solutions in indoor lighting applications (automatic light switching based on occupancy). It detects the slightest movement within a range 25 m long. Equipped with adjustable switchoff delay times up to 35 minutes. Electrical connections via an additional sensor cable with a modular socket (“snap-in”).The daylight override function prevents the lights being witched on, if enough daylight is available. LRM8116/00 Wall-mounted passive infrared movement detector for energy saving solutions in indoor lighting applications (automatic light switching based on occupancy). It detects the slightest movement within an angle of 90º (maximum range 15 m by 15 m at a mounting height of 2.1 m). Equipped with adjustable switchoff delay times up to 35 minutes. Electrical connections via an additional sensor cable with a modular socket (“snap-in”).The daylight override function prevents the lights being switched on, if enough daylight is available.
PHL-H11_INT.QXD 16-07-2004 10:45 Pagina 11.35 Lighting controls General purpose components Product ID Dimensions in mm Weight (kg) European Order Code (EOC) IRR8125/00 SENSR IR NV 0.03 51716200 LRD8000/00 DIMMER 1KVA MAGNETIC TX 0.40 51571700 LRD8010/10 DIMMER 1KVA ELECTRONIC TX 0.53 51573100 LCU8020/00 INTERF PUSHBUTTON 0.10 51656100 IRR8125/00 Infrared receiver for remote control of lighting systems and other building-related functions.The unit is especially intended for “invisible” mounting behind a false ceiling. Only a thin plastic optic protrudes from the ceiling. More infrared receivers can be connected in parallel to cover large or odd-shaped rooms. It is powered from the corresponding controller, not requiring an external power supply unit. Electrical connections with a fixed cable (1 m.) with modular plug. Mounting height 2.5 to 3 m. LRD8000/00 Light regulator for incandescent lamps, high-voltage halogen lamps and low-voltage halogen lamps with conventional transformers.The minimum light output level can be adjusted between 1% and 10% of maximum light output level. A green “power on” LED indicates the power status of the unit. Max. load is 1000 VA. LRD8010/10 Light regulator for incandescent lamps, high-voltage halogen lamps and low-voltage halogen lamps with electronic transformers.The minimum light output level can be selected between 1% and 10% of maximum light output level. A green “power on” LED indicates the power status of the unit. Max. load is 1000 VA. LCU8020/00 Push-button interface. RC5 code generator with digital inputs for the connection of push-buttons. Intended for manual control of light controllers and for coupling to other systems such a building management systems.The unit is connected to the infrared remote control input of the controller. Combination with an IR receiver is possible. Codes generated, depend on the input terminals used, 20 combinations are possible. Different sets of codes, for Helio/Trios and Scenio can be selected with a rotary switch.The unit is powered from the corresponding controller. LIGHTING CONTROLS 11.35
Page 1 and 2: PHL-H11_INT.QXD 16-07-2004 10:42 Pa
Page 33: PHL-H11_INT.QXD 16-07-2004 10:45 Pa

Lighting controls

Create successful ePaper yourself

Delete template?

Save as template?