Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PHL-H11_INT.QXD 16-07-2004 10:44 Pagina 11.20<br />
<strong>Lighting</strong> <strong>controls</strong> Helio lighting management system<br />
Product ID Weight<br />
European Order<br />
(kg)<br />
Code (EOC)<br />
LRC5048/00 CONTR 8x4 PLUG SW&RE 3.00 51688200<br />
LRI5133/10 SENSR LON MULTISENSOR 0.30 51684400<br />
11.20 LIGHTING CONTROLS<br />
Dimensions in mm<br />
LRC5048/00<br />
Helio light controller with eight separately controlled<br />
outputs and two interfaces for standard movement<br />
detectors, light sensors and pushbutton switches.The<br />
outputs are able to switch and regulate lighting loads<br />
up to 5 A.The unit has a maximum total rating of<br />
16 A. Each output has a 6-pole Wieland socket<br />
(GST) that includes a maintained live for power<br />
supply to batteries in emergency luminaires. Battery<br />
performance can then be tested by interrupting the<br />
maintained power supply at prescribed intervals.<br />
LRI5133/10<br />
Helio multi-sensor with movement detector, light<br />
sensor, and infrared receiver used for remote and<br />
automatic control of lighting, HVAC and sun blind<br />
functions in integrated room control applications.The<br />
IR receiver can be combined with hand-held and wall<br />
transmitters for remote control operations and with<br />
wall transmitters with built-in temperature sensors for<br />
automatic temperature control. Units are connected<br />
directly to LonWorks ® bus cable for network<br />
communication and power supply.Their functional<br />
behaviour can adapted by downloading project<br />
specific software over the bus.<br />
Mounting plate for surface mounting of LRI5133.<br />
This plate is packed together with the sensor itself.<br />
Mounting ring for recessed mounting of LRI5133.<br />
This ring is packed together with the sensor itself.