Error Messages

Chapter 6: ATM Error Messages
%ATM-E-FORCEDBRIDGED Ports are referenced
in forced-bridged.
Explanation:
This error message appears when a user attempts to negate a VCL that is still assigned to be forcedbridged.
Recommended Action:
Negate the forced-bridge option on the VCL, then negate the VCL.
%ATM-E-FPGACRCERROR Channel %d, CRC error during FPGA
Download.
Explanation:
The router encountered a CRC while downloading the FPGA onto the ATM card. This may
indicate a bad ATM card if the error persists.
Recommended Action:
Hot swap the ATM card or reboot the router. If the error persists, replace the module.
%ATM-E-FPGADNLOADFAILED Channel %d, FPGA bitstream
download failed.
Explanation:
The router encountered an error while downloading the FPGA onto the ATM card. This may
indicate a bad ATM card if the error persists.
Recommended Action:
Hot swap the ATM card or reboot the router. If the error persists, replace the module.
%ATM-E-FPGAFILENAMEUNKNOWN Channel %d, could not get
FPGA filename to open.
Explanation:
Internal error.
Recommended Action:
Contact Enterasys Technical Support.
Enterasys X-Pedition Error Reference Manual 29