Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Starter system - clutch <strong>MA</strong><strong>50</strong> - <strong>MY</strong><strong>50</strong><br />
Starter system - remove<br />
Remove the starting lever retainer screw and take off<br />
the pedal. T ake out the 12 casing cover screws and<br />
remove the cover along with its gasket, taking special<br />
care with the two locating pins.<br />
Remove the circlip (1).<br />
CAUTION : Preloaded spring.<br />
Release the pressure spring (1), using a hook or<br />
screwdriver . Remove the toothed plate (2) and the<br />
pinion (3).<br />
Starter system - check<br />
Check the starter system, renewing it if there are any<br />
signs of damage or wear .<br />
Check the return spring, renewing it if weakened.<br />
Measure the spring tension, which must be from 1<strong>50</strong><br />
to 2<strong>50</strong> g (5 to 9 oz).<br />
Check the engagement teeth and pinion teeth on the<br />
retainer ring.<br />
6-2<br />
Release 00 2000-01<br />
1<br />
1<br />
2<br />
ch. 6<br />
3
Change language