Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Starter system - clutch <strong>MA</strong><strong>50</strong> - <strong>MY</strong><strong>50</strong><br />
Starting clutch - check<br />
Check the general condition of the starting clutch.<br />
Push the rollers in the direction of the arrow and<br />
check that they run smoothly in the groove and return<br />
to their original position. Renew if necessary .<br />
Check the condition of the gear teeth and the internal<br />
and external faces of the starter wheel. Inspect the<br />
roller bearings carefully . Replace any components<br />
which display excessive wear , scoring or distortion.<br />
Clutch and secondary pulley - remove<br />
Remove the clutch housing locknut, keeping the<br />
clutch housing stationery using the special tool.<br />
CAUTION : The clutch nut is screwed on<br />
tightly. Proceed with care to avoid hurting yourself.<br />
Special tool: 8106702<br />
Simultaneously remove the clutch housing along with<br />
the secondary pulley unit and the belt.<br />
CAUTION : Do not twist the belt.<br />
6-6<br />
Release 00 2000-01<br />
ch. 6