Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
Aprilia MA MY 50 Workshop manual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Starter system - clutch<br />
Check that the external diameter (D) of the weights is<br />
not less than the maximum wear limit. If it is, renew<br />
them.<br />
Wear limit D: 14.5 mm (0.571 in)<br />
Check the condition of the moving portion of the<br />
weight casing and the three drive inserts. If they show<br />
excessive wear , replace them.<br />
Starting clutch - remove<br />
Take out the two screws and remove the intermediate<br />
gear locking plate, the gear and the outside and inside<br />
washers.<br />
Remove the starting gear clutch, roller bearings and<br />
bushing simultaneously , being careful not to drop the<br />
locating pins from the inside of the starting clutch.<br />
ch. 6<br />
Release 00 2000-01<br />
<strong>MA</strong><strong>50</strong> - <strong>MY</strong><strong>50</strong><br />
6-5<br />
6