Manual Inspecta Software

2.4.1.1 mvfg_test (), mfgtest()
Synopsis: LONG mvfg_test ( void );
Description: This function initializes INSPECTA
Returns: == 0 OK
!= 0 Errorcode:
-2 memory base address not found ; DOSX only
-3 cant map phys -> lin ; DOSX only
-6 memory banks do not exchange ; INSPECTA 1 only
-8 no clock from self test
-10 no frame data valid from self test
-11 no line data valid from self test
-13 WRONG CPU (386) ; DOSX only
Any error stops further activity.
Example: LONG lMvfgError;
lMvfgError );
if (lMvfgError = mvfg_test())
{
wsprintf( acBuffer, "Error %lh with initialization of INSPECTA",
...
}
Remarks: Error codes -2, -3, and -6 can only occur in DOSX platforms.
Error code -6 does not occur with INSPECTA 2.
Software
INSPECTA Software Rev. 1.47 Page 13