Manual Inspecta Software

2.4.5.14 linends3 ()
Description: linends3 () closes direct access to S3 RAM.
2.4.6 Miscellaneous functions
2.4.6.1 mvfg_IntCallback (), mfg_IntCallback
Synopsis: void mvfg_IntCallback(* user_proc, segments );
Software
Description: mvfg_IntCallback () provides a pointer to an application-programme to the
MVFG interrupt Service routine. The MVFG service routine calls then this
application-programme on every interrupt. ( every 64usec for interrupt on
HSYNCS and every 16 msec on inteerupts on VSYNCS ).
Use this function to avoid any polling loops in the application programme
(e.g. waiting for an optical sensor ).
The parameter ‘segments’ is always 0.
Returns: --
Remark: This function is available with DOSX and Windows95. Do not call any
systems functions out of this user programme, because it runs as an
extension of the protected-mode service routine.
INSPECTA Software Rev. 1.47 Page 55