Push Button Panels PP7, PP17-I, PP17-II - Siemens Industry Online ...
Push Button Panels PP7, PP17-I, PP17-II - Siemens Industry Online ...
Push Button Panels PP7, PP17-I, PP17-II - Siemens Industry Online ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connection types<br />
Unit configuration<br />
1-2<br />
The <strong>Push</strong> <strong>Button</strong> <strong>Panels</strong> can be operated using the following connections:<br />
via MPI to a SIMATIC S7-200<br />
via MPI to a SIMATIC S7-300<br />
via MPI to a SIMATIC S7-400<br />
via PROFIBUS-DP to a SIMATIC S5<br />
via PROFIBUS-DP to a SIMATIC S7<br />
via PROFIBUS-DP as standard slave to a DP master from a different<br />
manufacturer; possible restrictions regarding configuration of the <strong>Push</strong><br />
<strong>Button</strong> Panel.<br />
Parameters in the <strong>Push</strong> <strong>Button</strong> <strong>Panels</strong> are predefined and the unit is thus immediately<br />
ready to operate. Various options can also be activated by adjusting<br />
certain parameters. Each key, LED, digital input and output can be individually<br />
adapted according to specific requirements.<br />
No special configuration software is necessary for the <strong>Push</strong> <strong>Button</strong> Panel. All<br />
adjustment of the settings is carried out either directly on the <strong>Push</strong> <strong>Button</strong><br />
Panel or by means of the PLC configuration software.<br />
All adjustments to settings carried out on the <strong>Push</strong> <strong>Button</strong> Panel are stored in<br />
its memory module. In cases where the unit electronics or the entire unit are<br />
replaced, the interface need not be reconfigured. Only the old memory module<br />
needs to be transferred to the new unit.<br />
<strong>PP7</strong>, <strong>PP17</strong>-I, <strong>PP17</strong>-<strong>II</strong> Equipment Manual<br />
Release 06/98
Change language