Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16<br />
Interfacing with an <strong>Intellitan</strong> Controller<br />
To Interface with an <strong>Intellitan</strong> Controller<br />
Follow the instructions on page 9 to enter parameter<br />
mode.<br />
Press the START/STOP until parameter P005 is<br />
reached.<br />
Press RESET.<br />
Press the or controls to change the station<br />
address to match the room number you wish the unit<br />
to appear as on the network.<br />
Press RESET.<br />
Your timer is capable of being connected to a digital network controller that is <strong>Intellitan</strong> or T-Max © based<br />
once the parameters have been set.<br />
Press START/STOP until Parameter P027 is<br />
reached.<br />
Press RESET.<br />
Press the or controls to change the <strong>Timer</strong><br />
Protocol to 0000.<br />
Press RESET.<br />
Press and at the same time to return to<br />
stand-by mode (00:00 is displayed).<br />
Connect your network cable to either of the RJ-22<br />
ports on the timer.