Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Intellitan Remote Timer - ETS Tan Tanning Bed Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To Interface Other Network Controllers<br />
Your <strong>Intellitan</strong> <strong>Remote</strong> <strong>Timer</strong> may also be interfaced<br />
with other network controllers via an external TPI<br />
(Third Party Interface) module (JK part number<br />
0440041202).<br />
Follow the instructions beginning on page 9 to enter<br />
parameter mode.<br />
Press the START/STOP until parameter P005 is<br />
reached.<br />
Press RESET.<br />
Press the or controls to change the station<br />
address to 0001.<br />
Press RESET.<br />
Press START/STOP until Parameter P027 is<br />
reached.<br />
Press RESET.<br />
Interfacing using TPI<br />
Press the or controls to change the <strong>Timer</strong><br />
Protocol to 0000.<br />
Press RESET.<br />
Press and at the same time to return to<br />
stand-by mode (00:00 is displayed).<br />
Connect the cable from your TPI to either of the RJ-<br />
22 ports on the timer.<br />
19