Firewall: network rules - Kaspersky Lab

Kaspersky PURE 2.0
4. In the Network connection window click the OK button.
5. In the Settings window click the Apply button.
Advanced Firewall settings
You can specify additional settings of the Firewall operation:
► Allow active FTP mode. Active mode suggests that to ensure connection between
the server on the client computer a port to which the server will connect will be
opened on the client computer (unlike the passive mode when the client connects to
the server). The mode allows to control which exactly port will be opened. The
mechanism works even if a blocking rule was created. By default, active FTP mode
is allowed.
► Block connections if there is no possibility to prompt for action (application
interface is not loaded). This setting allows to avoid disruption of the Firewall
operation when the interface of Kaspersky PURE is not loaded. This is the default
action.
► Do not disable Firewall until the system totally stops. This setting allows to avoid
disruption of the Firewall operation until the system is completely stopped. This is
the default action.
By default all settings are enabled.
To modify advanced Firewall settings, please perform the following:
1. In the right part of the Firewall settings window in the Network rules section click the
Settings button.
28 | 3 0