Repair Manual for Wheel Loader WL 30 - Wacker Neuson

7.1 Test pressure gauge
WL 30 - 10/2008-1 (WDF-7020-00EN) 1000239425 - WDF-6001-00EN
Testing equipment 7
Purpose The test pressure gauge shows the pressure of the hydraulic circuit, the test
connection of which it is connected to.
Configuration For the pressure ranges, see the table "Pressure range and number"
Measuring line (Fig. 5,2)
Adapter (Fig. 5,1)
Pressure range and
number
Fig. 5 Test pressure gauge (up to
400 bar)
Pressure range Number required
0 ... 60 bar 3
0 ... 250 bar 1
0 ... 600 bar 2
7.2 Flow meter
Purpose The flow meter shows the flow and the pressure of the hydraulic circuit in
which the flow meter is installed.
Configuration Pressure range up to 400 bar
Flow up to 200 l/min
Oil temperature up to 114 °C
Fig. 6 Flow meter
7Testing equipment
2-23