Troubleshooting Guide - ETO Doors

More documents

Recommendations

Info

Trouble Shooting 4.2 2012 SITE 4
Air and/or Light Leak at Top or Bottom of Jamb PROBLEM: Air and/or light leak at top or bottom of jamb. Cause Solution Refer to… Weatherstrip missing. Weatherstrip painted. Weatherstrip cracked, torn or damaged. Bottom corner seal pads missing or removed. Door loose in frame, with excessive in-and-out movement when latched. Door not meeting weatherstrip evenly when it closes, hitting the top or bottom first. Replace weatherstrip. Site 5 - Weatherstrip Replacement Replace pads. SHOP 4 - Frame Assembly for Basic Fixed Sills Adjust strike plate for tighter fit. Realign, reshim, readjust lockside jamb so door meets weatherstrip evenly from top to bottom. SITE 1 - Pre-hung Unit Installation for Adjustable Sills SITE 1 Corner Seal Pad Instructions SITE 1 - Pre-hung Unit Installation SITE 1 - Pre-hung Unit Installation SITE 4 2012 4.3 Trouble Shooting
Page 1: SITE 4 Troubleshooting Air and/or L
Page 5 and 6: PROBLEM: Water leakage around or un
Page 7 and 8: PROBLEM: Water leakage around lites
Page 9 and 10: Door Will Not Open or Close Properl
Page 11 and 12: Classic-Craft & Smooth-Star Raised

Troubleshooting Guide - ETO Doors

Create successful ePaper yourself

Delete template?

Save as template?