Troubleshooting Guide - ETO Doors

More documents

Recommendations

Info

Trouble Shooting Water Leakage Around Door/System Perimeters PROBLEM: Water leakage around door/system perimeters. Cause Solution Refer to… Door not meeting weatherstrip evenly when it closes, hitting the top or bottom first. Improper/incomplete seal and/or sealant breakdown around or on top of unit. Improper/incomplete seal and/or breakdown around fixed unit sidelites where they meet the jamb. Realign, reshim, readjust lockside jamb so door meets weatherstrip evenly from top to bottom. Properly flash and/or seal with Elastomeric or Polyurethane sealant around brickmold. Reseal with Elastomeric and Polyurethane sealant to restore system integrity. SITE 1 - Pre-hung Unit Installation SITE 1 - Pre-hung Unit Installation 4.6 2012 SITE 4
PROBLEM: Water leakage around lites. Loose lites. Water Leakage Around Lites Cause Solution Refer to… Door face-to-lite frame seal breakdown. Glass-to-lite frame seal breakdown. Tighten doorlite screws. Apply sealing tape around inside perimeter of interior frame if required. Seal with Elastomeric and Polyurethane sealant around lite perimeter and/or paint or repaint the perimeter to form a paint seal. Replace doorlite. SHOP 3 - Doorlite and Panel Installation SHOP 3 - Doorlite and Panel Installation SITE 4 2012 4.7 Trouble Shooting
Page 1 and 2: SITE 4 Troubleshooting Air and/or L
Page 3 and 4: Air and/or Light Leak at Top or Bot
Page 5: PROBLEM: Water leakage around or un
Page 9 and 10: Door Will Not Open or Close Properl
Page 11 and 12: Classic-Craft & Smooth-Star Raised

Troubleshooting Guide - ETO Doors

Create successful ePaper yourself

Delete template?

Save as template?