Memo Operating Instruct - Euroheat

Over View of Heating Modes
Easy Mode
In the easy mode, the stove is simply switched on and off using the (power) key. The output of the stove can
be altered in 5% increments from 30-100%.
Comfort Modes (require connection of Rika room sensor or Rika wireless room sensor).
Heat Mode
This mode corresponds to the Easy Mode from basic operation, in which the heat output of the stove can be
increased or decreased in 5% increments.
Room
In “Room” mode the heat output of the stove cannot be changed and is regulated by the electonic control. You
do not need to worry about whether the stove heats up or not, the Rika room thermostat takes care of this
depending on the prevailing temperature in the room.
Auto Mode
In “Auto” mode you have the additional possibility of calling up the set comfort temperature for two preset
heating times each day or weeks automatically. In the time periods between the heating times a low
temperature that you set is maintained.
The heat output of the stove is regulated by the Rika room sensor.
Simple Heating Operation – Easy Mode – The First Steps
Software Version - 1.32
Your stove is in simple heating mode EASY OFF when delivered in order to ease your start in the world of RIKA
pellet stoves. The heat output of the stove can be increased or reduced in 5 % increments in this mode. As soon
as the stove is connected to the socket, the standard display EASY OFF appears. The message “CHECK” appears
in the display as soon as your pellet stove is connected to the power supply (even after a power failure). The
display buttons are disabled for approx. 10 seconds as the stove conducts an initialisation of all components.
When “CHECK” disappears from the display the stove can be started up. This procedure only occurs in the
“EASY” and “HEAT” mode.
“CHECK” appears in the display
whenever the stove is re-supplied
with power.
E A S Y
O F F
C H E C K
H E A T
O F F
© EUROHEAT DISTRIBUTORS (H.B.S) LTD. June 2011 15
Instructions Part Number IN1228 Ed 1