Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

More documents

Recommendations

Info

Release notes SC1x3 @CHIP-RTOS V1.06 Beta Type: Defect, Component: Filesystem (1 item(s)) CR Number: 1353 Type: Defect Component: Filesystem Category: SC1x3 FAT32 Synopsis: Files over 2 GByte size make disk inoperable Description: 1) Create a file over 2**31 bytes size on B: drive 2) Reset the target, and discover that B: is invalid due to sector zero having been over-written. Fix: Fixed. Type: Defect, Component: TCPIP API (1 item(s)) CR Number: 1365 Type: Defect Component: TCPIP API Category: Socket API Synopsis: Recv and Recvfrom with timeout option Description: The API functions 0x05 and 0x10 (recvfrom and recv) doesn't work correct, if the MSG_TIMEOUT flag is set and the specified socket descriptor has a higher value than 64. Fix: Fixed. Type: Defect, Component: Webserver (1 item(s)) CR Number: 1361 Type: Defect Component: Webserver Category: HTTP 1.0 requests Synopsis: HTTP 1.0 requests fail. Description: The TCP connection is not closed by the webserver if the request is from type HTTP 1.0. Fix: Fixed Type: Suggestion, Component: @CHIP-RTOS (1 item(s)) CR Number: 1369 Type: Suggestion Component: @CHIP-RTOS Category: Resources Synopsis: Should increase the RTOS resources: sockets, semaphores, tasks and message exchanges Description: The following resources should be increased to: - sockets: 256 - tasks: 78. - sempahores, timer, event groups: 128 - message exchanges: 32 Fix: Implemented 10 von 30
Type: Suggestion, Component: CAN Driver (1 item(s)) CR Number: 1337 Type: Suggestion Component: CAN Driver Category: CAN API Synopsis: Should add CAN API callback function and raise interrupt priority. Description: 1) Provide a callback from ISR option 2) Raise CAN ISR priority to 6 to put it in front of Ethernet ISR. Fix: Implemented. Type: Suggestion, Component: Chip.ini (1 item(s)) CR Number: 1368 Type: Suggestion Component: Chip.ini Category: POWERSAVE tag Synopsis: Ethernet operating mode at 1/4 clock speed Description: If POWERSAVE=4 (1/4 clock speed) is set at chip.ini, the internal ethernet controller doesn't operate at the 100MBit mode. Ethernet should be set fix to 10MBit mode, if this setting is detected at chip.ini. Fix: Implemented Type: Suggestion, Component: I2C API (1 item(s)) CR Number: 1357 Type: Suggestion Component: I2C API Category: Timeout handling Synopsis: Should improve the I2C hardware interface timeout handling. Description: If I2C slave is faulty, the SC1x3 hardware I2C functions may not return. Fix: Improved timeout handling. Type: Suggestion, Component: TCPIP stack (2 item(s)) CR Number: 1355 Type: Suggestion Component: TCPIP stack Category: TCPIP memory pool Synopsis: Should increase TCPIP memory pool limit Description: Should increase the max. value for the TCPIP memory pool from current 210 KB to 1000 KB. Fix: Implemented CR Number: 1375 Type: Suggestion Component: TCPIP stack Category: TCP Sockets 11 von 30
Page 1 and 2: Release notes SC1x3 @CHIP-RTOS This
Page 3 and 4: Total: 10 Component: CRYPT LIB Cate
Page 5 and 6: Component: RTOS Category: CPU core
Page 7 and 8: Category: CGI pages Synopsis: Addio
Page 9: Total: 26 Fix: Implemented Type: Ne
Page 13 and 14: Description: 1) If file ends with a
Page 15 and 16: Synopsis: The watchdog is sometimes
Page 17 and 18: Component: Webserver Category: Driv
Page 19 and 20: CR Number: 1331 Type: Suggestion Co
Page 21 and 22: Total: 41 Description: It shall be
Page 23 and 24: Description: The DIR command of roo
Page 25 and 26: Description: CGI post method does n
Page 27 and 28: Description: New mimetype image/x-i
Page 29 and 30: Type: New Component: I2C API Catego

Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

Create successful ePaper yourself

Delete template?

Save as template?