Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

More documents

Recommendations

Info

Total: 29 Synopsis: Implement a Server Side Include (SSI) API. Description: There should be an API for the SSI functionality of the web server. Fix: Implemented new functions in CGI interrupt 0xAB. Release notes SC1x3 @CHIP-RTOS V0.90 Beta Type: New, Component: CAN API (1 item(s)) CR Number: 1222 Type: New Component: CAN API Category: CAN controller Synopsis: CAN controller API Description: It shall be possible to access the two SC1x3 CAN controllers by an "Application Programmer interface". Fix: Implemented. The software interrupt 0xBF provides the CAN API functions. Type: New, Component: Documentation (1 item(s)) CR Number: 1225 Type: New Component: Documentation Category: RTOS API Synopsis: RTOS API documentation Description: Instead of several RTOS API documentation variants for the different IPC@CHIP targets SC11,SC12,SC13 and SC1x3, only one documentation for all targets should be provided. Fix: Implemented. The table at every RTOS API function lists the supported IPC@CHIP targets and their RTOS version number. Type: New, Component: File system (1 item(s)) CR Number: 1226 Type: New Component: File system Category: Flash translation layer Synopsis: Flash translation layer Description: It is necessary to add a "flash translation layer" to the DOS FAT filesystem, because of the large flash sector sizes of the SC1x3. Fix: Implemented. The flash translation layer allows the usage of a "normal" DOS FAT filesystem, as it is implemented at SC11,SC12 and SC13. The FTL provides "Wear leveling". "Wear leveling" allows data writes to be evenly distributed over the whole storage media. Type: New, Component: I2C API (1 item(s)) CR Number: 1224 28 von 30
Type: New Component: I2C API Category: I2C controller Synopsis: I2C controller API Description: The SC1x3 I2C controller shall be supported by an "Application Programmer Interface". Fix: Implemented. The software interrupt 0xAA provides the I2C master and slave mode functions. Type: New, Component: SPI API (1 item(s)) CR Number: 1223 Type: New Component: SPI API Category: SPI controller Synopsis: SPI controller API Description: The SC1x3 SPI controller shall be supported be an "Application Programmer Interface". Fix: Implemented. The software interrupt 0xAA provides the SPI master and slave mode functions. Type: New, Component: TCPIP stack (1 item(s)) CR Number: 1220 Type: New Component: TCPIP stack Category: IP version 6 Synopsis: IP version 6 support Description: In addition to IP version 4, the TCPIP stack shall also support IPv6. Fix: Implemented Type: New, Component: USB API (1 item(s)) CR Number: 1221 Type: New Component: USB API Category: USB device mode Synopsis: USB device API Description: It shall be possible to access the SC1x3 USB controller by an "Application Programmer Interface". Fix: Implemented. The software interrupt 0xBF provides the USB API functions. Type: New, Component: Webserver (1 item(s)) CR Number: 1219 Type: New Component: Webserver Category: Security Synopsis: SSL webserver Description: A webserver should be added, providing secure connections based on the "Secure socket layer" (SSL). 29 von 30
Page 1 and 2: Release notes SC1x3 @CHIP-RTOS This
Page 3 and 4: Total: 10 Component: CRYPT LIB Cate
Page 5 and 6: Component: RTOS Category: CPU core
Page 7 and 8: Category: CGI pages Synopsis: Addio
Page 9 and 10: Total: 26 Fix: Implemented Type: Ne
Page 11 and 12: Type: Suggestion, Component: CAN Dr
Page 13 and 14: Description: 1) If file ends with a
Page 15 and 16: Synopsis: The watchdog is sometimes
Page 17 and 18: Component: Webserver Category: Driv
Page 19 and 20: CR Number: 1331 Type: Suggestion Co
Page 21 and 22: Total: 41 Description: It shall be
Page 23 and 24: Description: The DIR command of roo
Page 25 and 26: Description: CGI post method does n
Page 27: Description: New mimetype image/x-i

Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?