Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

More documents

Recommendations

Info

Description: The argument length of an HTTP POST request is limited on SC1x by 768 bytes. The size of the argument buffer should be configurable by a chip.ini entry. Newer WAP applications will also cause problems, because of their very large "Accept" messages inside of the http request. Fix: Implemented new CHIP.INI entries - HEADER_SIZE (SC1x3 only) - HEADER_REJECT (SC1x3 only) - POST_SIZE (SC1x only) At SC1x RTOS very large (and unused) "Accept messages" are filtered out by the webserver. Type: New, Component: Fossil API (1 item(s)) CR Number: 1310 Type: New Component: Fossil API Category: Force RTS / Read CTS Synopsis: Add new functions for reading CTS and forcing RTS. Description: Because the serial ports 0 and 1 on SC1x3 have no PIO function for CTS and RTS, this new functions are needed. Fix: Implemented new fossil functions 0x86 and 0x87. Type: New, Component: HW API (1 item(s)) CR Number: 1313 Type: New Component: HW API Category: Enable ARDY and HOLD Synopsis: Add a hardware API function that enables ARDY and HOLD. Description: User should be able to enable ARDY and HOLD signals with the hardware API. Fix: Implemented new HWAPI PFE function 0x8D. Add new CLIB function pfe_enable_bus_signals(). Type: New, Component: TCPIP stack (3 item(s)) CR Number: 1257 Type: New Component: TCPIP stack Category: Auto IP Synopsis: Implementation of Auto IP Description: Implementation of Auto IP. At the current @CHIP-RTOS a host assigns automatically IP address 1.1.1.1, if the IP address configuration failed. It would be better to replace this mechanism by the Auto IP protocol. Fix: Implemented CHIP.INI setting AUTOIP CR Number: 1303 Type: New Component: TCPIP stack Category: IP configuration Synopsis: Multiple IP configuration 20 von 30
Total: 41 Description: It shall be possible to configure more than one IP address at one device interface (e.g ethernet device). Fix: Implemented. The new TCPIP API functions 0xAD .. 0xB1 providing the possibilty to configure/unconfigure IP addresses for a specified device interface at an accordant multihome index. CR Number: 1318 Type: New Component: TCPIP stack Category: PPPoE Synopsis: PPPoE driver support. Description: PPPoE driver program support required in @Chip-RTOS Fix: Implemented. Type: New, Component: Webserver (1 item(s)) CR Number: 1083 Type: New Component: Webserver Category: Mimetypes Synopsis: Customer specified mime types Description: Customers should be able to add their own mime types and matching file-extensions Fix: Implemented. Release notes SC1x3 @CHIP-RTOS V1.00 Type: Defect, Component: BIOSINT API (2 item(s)) CR Number: 1254 Type: Defect Component: BIOSINT API Category: Interval of interrupts 1Ch and AFh Synopsis: User can not specify the max interval of 65335. Description: The call is limited to 32767. Fix: Fixed CR Number: 1270 Type: Defect Component: BIOSINT API Category: Function 0x36 Synopsis: Malfunction server connection handlers Description: Server connection functions for Telnet and HTTP installed with BIOSINT API function 0x36 are not executed. Fix: Fixed 21 von 30
Page 1 and 2: Release notes SC1x3 @CHIP-RTOS This
Page 3 and 4: Total: 10 Component: CRYPT LIB Cate
Page 5 and 6: Component: RTOS Category: CPU core
Page 7 and 8: Category: CGI pages Synopsis: Addio
Page 9 and 10: Total: 26 Fix: Implemented Type: Ne
Page 11 and 12: Type: Suggestion, Component: CAN Dr
Page 13 and 14: Description: 1) If file ends with a
Page 15 and 16: Synopsis: The watchdog is sometimes
Page 17 and 18: Component: Webserver Category: Driv
Page 19: CR Number: 1331 Type: Suggestion Co
Page 23 and 24: Description: The DIR command of roo
Page 25 and 26: Description: CGI post method does n
Page 27 and 28: Description: New mimetype image/x-i
Page 29 and 30: Type: New Component: I2C API Catego

Release notes Sc1x3 @CHIP-RTOS V1.10 ... - Beck IPC Gmbh

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?